BOULT Z40 Gaming Earbuds Instruction Manual
- July 31, 2024
- BOULT
Table of Contents
BOULT Z40 Gaming Earbuds Instruction Manual
Know your Z40 Gaming
What’s in the box ?
Charging Case
Earbuds
Type C Charging Cable
Manual
Extra pair of ear tips
Warranty Card
https://www.qrfy.com/f9hNbcGlsg
Product specification
Product Name – TWS Bluetooth Headset
Model – Boult Audio AirBass
Bluetooth Range – ~10m/33ft (without any obstacles)
Earbuds Charging Time – 60 mins
Frequency Range – 20Hz – 20KHz
Technology – HFP/HSP/A2Dp/AVRCP
Input – DC5V = 1A
How to download & connect to ‘Boult Amp’ App
Install the ‘Boult Amp’ App from the Play Store or App Store
- Take the earbuds out of the charging case
- In the Boult Amp App click on “Add Device” and search for your Boult earbuds
- Select the pairing name “Boult Audio AirBass” and complete the pairing process
- If a pop-up doesn’t appear, select “go to settings” from the App screen and select “Boult Audio Airbass” to connect your earbuds
- Your earbuds are now connected; get the most out of your earbuds with available features on the App
How to use your Z40 Gaming?
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in the upper part of
the earbuds handle.
Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R
is worn on the right ear.
LED Functions
Opening the Case
All LEDs will glow continuously for 2 sec
Case LED indicator glows for 2s then do a RGB running cycle for 9s and goes
off
Closing the Case
Case LED indicator does a RGB running cycle for 9s then becomes steady and
goes off
Charing the Case
LED indicator breathes red until charging and glows green once fully charged
Low Case Battery (30%):
LEDs will blink in red thrice, take a gap of 1s and repeat this for 3 times
When the buds are connected
Music Mode: Both earbuds’ LEDs blink once in 5 sec
Gaming Mode: Both earbuds’ LEDs will breathe once in 2 sec
Power ON/OFF:
Power ON:
Auto: Open the charging case and take out the earbuds to
Power ON.
Manually: Tap and hold the multifunction button (MFB) for 3 seconds.
Power OFF
Auto : Place both the earbuds in the charging case, close the lid.
Manually : Hold MFB for 5 seconds.
Play/Pause
Tap the MFB once
Next Track
Double Tap the right MFB
Voice Assistant
Long Press the MFB for 2s
Answer the Call
Tap the MFB once
Previous Track
Double Tap the left MFB
Volume +
Triple Tap the right MFB
Volume –
Triple Tap the left MFB
End Call/Reject
Double Tap the MFB
Game/Music Mode
Tap the MFB four times
Pairing
Open the charging case, and take out the earbuds, the earbuds LEDs will start
flashing automatically until paired with a device.
Activate Bluetooth on the device, turn on Bluetooth, search for pairing name
“Boult Audio Airbass” and click on it.
Single Mode : When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
Bluetooth Lost:
Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can
pair with other devices. If the connection range is exceeded, the earbuds will
enter back into connection mode. If there’s no connection within 5 minutes,
the earbuds will turn off.
Dual Device Connectivity:
- Connect the Z40 Gaming with your first device. Once your Z40 Gaming is paired with the first device, turn off the Bluetooth of your first device.
- Now turn on the Bluetooth of your second device and follow the same steps to connect to your Z40 Gaming Bluetooth earbuds.
- Once Z40 Gaming is connected to your new device, turn on Bluetooth of the first device.
- You will hear a sound again “connected” which means both your devices are now connected to the Z40 Gaming earbuds.
- You can now enjoy music and take calls from both of your connected devices on your Z40 Gaming earbuds.
To disconnect from either of the devices, go to the Bluetooth settings of the respective device and press disconnect/forget.
Reset
If your earbuds fail to pair, or only one works, reset them.
- Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off Bluetooth.
- Put earbuds in the charging case and then take out to pairing modes, tap L&R 5 times simultaneously, hear “DU” prompt voice to clear all pairing.
- Put earbuds back into the charging case.
Voice Prompts
- You will hear ‘power on’ when the headset powers on.
- You will hear ‘power off’ when the headset powers off.
- You will hear ‘connected’ when the headset is paired.
- You will hear ‘low battery’ when the headset is in low power status
- You will hear ‘gaming mode’ when the headset is in gaming mode.
Maintenance Instructions
Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal channels to be applicable for warranty.
Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>