JoyBring 55DB Car Player with Mirror Link User Manual

JoyBring 55DB Car Player with Mirror Link

Product Information

Specifications

• FM Frequency Range: 87.5-108MHz (EU), 87.5-107.9MHz (US)
• AM Frequency Range: 522-1620KHz (EU), 530-1710KHz (US)
• Feature: Mirror Link for iPhone
• Bluetooth interface for music control and calls

Product Usage Instructions

Description of Function Buttons
This user manual provides general information for multiple models; please refer to your specific product for accurate details.

Instruction for Wiring

Notes:

• Installation procedures may vary based on car type and included parts.
• Keep small parts away from children’s reach.
• Use only the provided screws for installation.
• Professional installation by a technician is recommended.

Phone Mirror Link

1. Connect your phone to the head unit using a USB cable.
2. A window will pop up on your phone, select “Trust” to enable
   the Phone link function.

Bluetooth Interface Functions

1. In the BT CALL menu, click the icon to disconnect Bluetooth; click again to access Bluetooth setup.
2. In the BT PHONE BOOK menu, click the icon to load the phone book; click again to cancel loading.
3. In the BT CALL LOG menu, click the icon to load call log; click again to cancel loading.
4. In the BT MUSIC menu, click the icon to play music; click again to pause playback.

Signal Source Control

1. Touch to select a station with FM frequency.
2. Touch to select a station with AM frequency.
3. Touch to search and save bands automatically.
4. Touch to activate the PRESET STATIONS MENU on the screen.
5. Touch to shift to the previous menu or operation mode.

FAQ

Q: How do I set up the Mirror Link feature?
A: To use the Mirror Link feature, connect your phone to the head unit via a USB cable and follow the on-screen instructions on your phone to establish a connection.

Q: Can I install the unit myself?
A: While installation instructions are provided, it is strongly recommended to have the unit installed by a professional technician for optimal performance and safety.

DESCRIPTION OF THE FUNCTION BUTTONS

This is a general user manual for many models, so the UI , appearance and functions described in this manual may differ from the product you have, please refer to the actual product.

1. IR sensor
2. microphone
3. Bluetooth interface
4. main menu/back
5. Next track/manual
6. tunning forward
7. on/off/volume
8. Previous track/manual tuning backward
9. USB socket
10. Reset
11. AUX input
12. Mini SD card slot
13. Front camera(B+)
14. Brake detectBack car control
15. Steering wheel 1
16. Steering wheel 2
17. GND

• V-N
  • Video input
• L-IN
  • Auxiliary left speaker input
• R-IN
  • Auxiliary right speaker input
• L-OUT
  • Rear left speaker output
• R-CAM
  • Backsight camera input
• SW
  • Sub-woofer output
• R-OUT
  • Rear right speaker output
• F-CAM
  • Front camera input
• V-OUT
  • Video output
• ANT
  • Radio antenna
• MIC
  • Extraposition MIC(optional)

INSTRUCTION FOR WIRING

IMPORTANT NOTICE & PRECAUTIONS

Thank you for using our company multi-media player! To operate the unit correctly, please read the operation manual carefully before using. Keep this operation manual for further reference. The unit is designed only for DC 12V negative ground operation system. Make sure your vehicle is connected to DC 12V negative ground operation system. Be sure to connect the speaker(-) lead to the speaker(-) terminal. Never connect the left and right channel speaker wires together or to the vehicle body. The normal temperature for operation is between -20 and +60 degree Celsius. Do not work in extreme high or low temperature and lock vents or radiator panels of the unit, blocking them will cause heat to build up inside the unit and may cause damage or fire. This unit can play the following media files: 1080p / RMVB / MPEG 4 / MP3 / WMA / JPEG.

INSTALLATION

Notes:

• – Installation varies on type of cars and supplied parts
• – Store small articles in places not accessible to children
• – Install only with the supplied screws
• – Installation of unit by a professional technician is strongly recommended

MAIN UNIT OPERATION

Note
The above-mentioned symbols/functions/operations & controls show the operations for various version of the unit and may not be equipped or available for control in this unit. Printings and symbols on the above may be varied from the exact main unit. Referred to the main unit for exact functions and features that applied.

REMOTE HANDSET – GENERAL OPERATION

BATTERY REPLACEMENT
Refer to the back of remote handset for details on how to replace the battery.

Remarks : Depends on the input devices & playback media files, operation may be varied or not available for operation.

ON-SCREEN – MAIN MENU OPERATION

During unit operation and when this icon appeared on screen, touch to shift screen to MAIN MENU for selection of various operation or setup modes

Touch the icon on the desired mode on screen and the unit will then enter into the mode that selected for operation. Hold & slide on screen to shift to other MAIN MENU that shows the hidden input or operation icons.

1. Touch to start radio operation (when the radio antenna connected).
2. Touch to Move selection left.
3. Touch to start mobile phone mirror linking operation (when the mobile phone connected).
4. Touch to start USB input operation (when an USB device inserted).
5. Touch to start SD card input operation (when a micro SD card inserted).
6. Touch to start Bluetooth operation (when the mobile phone connected)
7. Touch to start auxiliary input operation (when an auxiliary device inserted).
8. Touch to Move selection right.
9. Touch to start viewing front camera (when connected to front camera and pink/black wire).
10. Touch to activate SYSTEM SETUP MENU on screen to have various setup of the unit.
11. Touch to select to desired preset equalization mode.
12. Touch to Make steering wheel control settings.

ON SCREEN – SETUP OPERATION

At MAIN MENU, touch to shift screen to SETTING MENU for various system setup of the

Hold & slide up/down on screen to show the hidden SETTING MENU for various setup of the unit.

1. Touch to shift screen to MAIN MENU.
2. Touch to shift to previous menu or operation mode.
3. Touch to roll the page up and down.
4. Touch to shift to SYSTEM SETUP MENU for various system setting (Refer to SYSTEM SETUP).
5. Touch to activate LANGUAGE INTERFACE to select the desired system language on screen.
6. Touch to shift to AUDIO SETUP MENU for various audio setting (Refer to AUDIO SETUP).
7. Touch to shift to VISUAL SETUP MENU for various visual setting (brightness, contrast,hue, saturation,sharpness)
8. Touch to shift to CALENDAR SETUP MENU for calendar & clock setting (Refer to CALENDAR & CLOCK SETUP).
9. Touch to shift to BLUETOOTH SETUP MENU for various Bluetooth setting (Refer to BLUETOOTH SETUP).
10. Touch to shift to PHONE LINK SETUP MENU for relevant settings.
11. Touch to shift to access other relevant settings
12. Touch to shift to SWC SETUP MENU for steering wheel control setting (Refer to STEERING WHEEL CONTROL SETUP).
13. Touch to enter reset setup. At this mode, touch the arrow to reset the unit at its ex-factory default stage.
14. Touch to shift to VERSION MENU to show details of the unit (Refer to VERSION OF UNIT).
15. Touch to activate the volume control bar on screen, hold & slide to adjust the output level on volume.
16. Touch repeatedly to select brightness of screen or turn off the screen. When the screen is off, touch any portion of the screen to turn it on again

ON-SCREEN – RADIO OPERATION

At MAIN MENU, touch to shift screen to RADIO MENU for radio operation.

1. Touch to Select station with FM frequency.
2. Touch to Select station with AM frequency.
3. Touch to Search and save band automatically.
4. Touch to tune the radio frequency to upward or downward station for broadcasting. Touch & hold shortly to activate manual tuning mode. At this mode, touch repeatedly to fine tune radio frequency upward or downward.
5. Touch to select stereo (STEREO) or mono (MONO) mode at FM radio band. When stereo signal received, ST indicator will be highlighted on screen and this is no indicator for mono signal. Touch the desired preset station to start broadcasting.
6. Touch & hold shortly the desired preset station can store the current broadcasting station (frequency) into that station.
7. Touch repeatedly to select desired preset equalizat ion mode.
8. Touch to activate the PRESET STATIONS MENU on screen.
9. Touch repeatedly to select brightness of screen or turn off the screen. When the screen is off, touch any portion of the screen to turn it on again
10. Touch to Touch to shift to previous menu or operation mode.
11. Touch to activate the volume control bar on screen, hold & slide to adjust the output level on volume.
12. Touch to shift screen to MAIN MENU.

ON-SCREEN – BLUETOOTH OPERATION

LINK UP WITH MOBILE PHONE

To linkup Bluetooth connection with the mobile phone, take your phone and follow the steps:

• – set the mobile phone to Bluetooth state
• – start to search new device
• – after searched, new device “CAR BT” searched out, confirm the search
• – in case of need, input default code “0000” or “8888” in the mobile phone
• – at the same time, Bluetooth icon on screen will be highlighted
• – connection succeeded and you can start using Bluetooth function

At MAIN MENU, touch to shift screen to BT MAIN MENU for Bluetooth operation (when a mobile phone has been linked up with the unit).

Touch to shift to BT MAIN MENU for dial out of phone.

1. Touch to shift to BT PHONE BOOK MENU to show the phone book of the connected mobile phone.
2. Touch to shift to BT RECORD MENU to show the record on incoming calls / dial out numbers / missing calls of the connected mobile phone.
3. Touch to shift to BT MUSIC MENU for transmission of music playback from the connected mobile phone.
4. Touch to shift screen to MAIN MENU.
5. Touch to activate the volume control bar on screen, hold & slide to adjust the output level on volume.
6. Touch to start Bluetooth operation (when a mobile phone linked up with the unit and this icon high-lighted).
7. Touch repeatedly to select brightness of screen or turn off the screen. When the screen is off, touch any portion of the screen to turn it on again
8. Touch to shift to previous menu or operation mode.
9. In the BT CALL menu, click the icon to disconnect the Bluetooth; click again to enter the Bluetooth setup menu.
10. In the BT PHONE BOOK menu, click the icon to load phone book; click again to cancel the load.
11. In the BT CALL LOG menu, click the icon to load call log; click again to cancel the load.
12. In the BT MUSIC menu, click the icon to play the music; click again to pause the play.

DISPLAY MIRRORING-ANDROID MIRROR LINK

• The special feature of the device is to display the image of a mobile phone which is connected with USB cable and which has Android operational system on the large touchscreen as a secondary display.All applications on your mobile phone are displayed in portrait or landscape format, depending on the position of the phone, and can be controlled from the radio’s touch screen without touching the phone. For example, music, movies,and other content, as well as internet radio,maps, navigation applications, POl databases,or music from the phone’s memory or online.

• First, make sure that you have a ” QR Code” reader application on your phone. If you have not, install a free version from the Google Play app store.

• Then select PHONE LINK from the main menu. Two QR codes and some instructions will appear on the screen. Download the AUTOLINK application to install on your phone:

• „AMAZON”QR code link; free download directly from the website to the phone:
  https://s3-ap- southeast1.amazonaws.com/productscenter/release/venus/bootes/common/Autolink.apk
  http://www.autolink.site:8080/jeesite//static/apk/Autolink_basic.apk

• „GOOGLE”QR code link; free download from Google Play store
  https://play.google.com/store/apps/details?id=com.link.autolink

• As the third option,you can locate and install the AUTOLINK application with the logo above manually from the Google Play store.

• Download a file directly from the website to your phone and install the application independently of the store, such as the „AMAZON” link.

After installing the application,connect the phone with a USB data cable. Instructions on the screen:
CONNECT PHONE:

1. OPEN USB DEBUGGING
2. CONNECT USB LINE

Set the phone correctly:
SETTINGS menu/ Developer options/

USB debugging/USB CONNECTION:ON (enable!)
Below the previous menu item:USB TROUBLESHOOTING

RELEVANT PERMITS:ON (enable!)

• This question usually automatically appears on the phone’s opening screen or on its scrollable informational window after connecting the USB cable. Allow it to be permanently, so that it does not need to be repeated after each connection!
• It is recommended to have the screen lock switched off for easier operation or to set an unlocking mode on the phone, which is easier even from the car radio.

Android screen mirroring is only available if the AUTOLINK application is installed and the USB troubleshooting mode, as well as sharing data security setting is permitted on the phone. Unlock the screen lock on the phone and connect the phone’s cable to the radio’s USB socket. If the connection process does not happen automatically, touch the CONNECT PHONE (connect phone) button on the car radio screen. When a successful connection is made the image of the mobile phone immediately appears on the screen.
In case of connection failure:

• Verify that AUTOLINK is installed on your phone
• Try another USB connection cable
• Restart your phone and check developer, USB connection settings, and data sharing permissions
• Verify that your Android phone is suitable for such use (Android 5.0 and newer, with Mirror Link compatibility)
• If the image does not rotate when the phone is rotated, then check if the image-rotation is permitted in the scrollable menu. You can do this with local controller menu, which appears after tapping the white, unlabeled button on the car radio’s left side.
• The picture is transmitted via the USB cable to the car radio while the sound is over the wireless BT connection. Meanwhile,the phone battery is charging.
• The USB cable must have a data transfer function in addition to the charging function.In general, the cable supplied with your phone is good

iPhone Mirror Link

Pis connect your phone to headunit via USB cable, then a window will pop on your mobile phone, choose”Trust” to realize Phone link function.

Description of Phone Link Menu:

1. When the Phone Link has been connected successfully, you’ll see
2. Press it and you’ll see a menu. You can close the Phone Link menu by clicking areas outside the menu.

SIMPLE TROUBLESHOOTING

PROBLEMS, CAUSES & SOLUTIONS

• No power
  • – Check and make sure the connecting wires are connected correctly
  • – Check whether the fuse is blown. Replace with the proper value fuse if necessary.
• No sound
  • – Check and make sure the speaker wires are connected correctly.
• No picture
  • – Check whether the video wire is connected to the video device.
• Unit hang-up
  • – Reset the unit to its default stage,
• No function when pressing the buttons or TFT screen
  • – Reset the unit to its default stage.
• Poor effect or unable to receive radio
  • – Check whether the radio antenna is inserted or properly connected
  • – Antenna may not be the proper length. Make sure the antenna is fully extended
  • – Antenna may be poorly grounded. Check and make sure the antenna is properly grounded.
• Stereo cannot be received under radio mode
  • – Tune the radio frequency accurately.
  • – The broadcasting signal is too weak, set the mode to MONO.
• Remote handset does not work
  • – Replace new battery of the remote handset.
  • – Point the remote handset directly at the remote sensor of the main unit.
  • – Clean the surface of the remote sensor.
• Bluetooth not operated
  • – check the devices are linked up correctly.

SPECIFICATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>