bryton Rider 460 GPS Bike Cycling Computer User Manual

bryton Rider 460 GPS Bike Cycling Computer

Quick Start Guide
www.brytonsport.com

Initial Setup

1. Download Bryton Active app on your phone.
2. Turn on your Rider 460.
3. After logging into the app, add the Rider 460 to your account.
4. Set up your profile, preference settings, and data page grid via the app before your first ride.
   • Key Functions Power/Backlight( ) : Press to turn the device on. Press to turn on/off the backlight while the device is on. Long Press to turn the device off.
   • Up (A) :Press to scroll up the data screens and the options in Menu.
   • Down/Menu( ): Press to scroll down the data screens and the options in the menu. Long press to enter the menu.
   • OK/Record/Pause ( ): In Menu, press to enter submenu or confirm a selection. In data page, press to start recording. When recording, press to manually pause.
   • Lap/Back ( ):In Menu, press to return to the previous page or cancel an operation. When recording, press to mark the lap.

Reboot Rider Press ( ) at the same time to reboot the device.

Getting Started

Please charge your device for at least 4 hours before the first use. To begin

1. Press to turn on the device.
2. select the display language/unit and press oK to confirm the selection.
3. Device will automatically search for satellite signals. You can view the GPS signals status on the screen
4. After GPS signal is fixed *, ( )select to start the ride in free cycling mode.
5. To record, press to start ok recording. *Check and update your device firmware version via Bryton Active app.
   To acquire GPS signals, allow the device access to an open sky, outdoor environment.

Follow Track

• In the Bryton Active app, Go to “My Route” and tap the route. Click the  to download it to the device.
• Then, in the Main Menu of the device, navigate to “Course” > “Route”. Find the route and tap to start following the track.

Rider 460 provides 3 ways to create tracks.

1. Plan trip via Bryton Active App.
2. Import GPX track files via Bryton Active app.
3. Auto sync routes from Strava, Komoot, and RideWithGPS.

Plan Trip via Bryton Active App

1. In the Bryton Active App, select “Course” > “My Route” > “Plan Trip” to set a Start point and Destination by tapping on the map or inputing address in the Search Bar.
2. After finishing planning, save the planned trip to “My Route” by tapping “Save”.

Import GPX track files via Bryton Active App

1. Download routes in GPX format from any other source.
2. Select “Open in Active”(for iOS or Open files with Bryton Active App (for Android).
3. Select “Course” > “My Route” in Brytor Active App.
4. Here you can see the routes imported to the App.

Auto sync routes from Strava, Komoot and RideWithGPS

1. In the Bryton Active app, select “Course” >” My Route” > “3rd party account link”.
2. You can enable STRAVA/Komoot/RideWithGPS auto sync there.
3. Once authorized, you can see routes from those platforms in “My route” with their icons.

Data Sync

Sync Data to/from Bryton Active app With the Bluetooth connection, your Rider computer can upload recorded tracks, download planned trips, and update the firmware via Bryton Active app. It is required to add your device to your Bryton Active account before syncing data for the first time. To add.

1. Sign up / log in to your Bryton Active App account.
2. Go to “Settings” and click “+” to add a new device to your account.
3.  Select your device and tap to add your device to your Bryton Active account.
4. Your device is now successfully paired with the Bryton Active App.
5. Click the device icon to initiate the activity sync. You can enable the “Auto Sync Track” feature as well.

Upload/Share Your Tracks via USB

1.  Connect the device to your computer via USB cable.
2. Select fit files from Bryton -> Activities folder in the device.
3. Upload files to brytonactive.com and popular training sites such as STRAVA and TrainingPeaks.

Icon Description

Note:

• For Firmware Update, please go to www.brytonsport.com > (Menu) > Support > Download.
• For Video Instructions, please go to www.brytonsport.com > (Menu) > Support > Tutorial.
• For User Manual, please go to www.brytonsport.com> (Menu) > Support > Download > Manual > User Manuals.

Install Rider 460

Mount Rider 460 to the Bike

Install Heart Rate Belt (Optional)

• Accuracy may be degraded by poor sensor contact, electrical interference, and receiver distance from transmitter. The Bryton Smart HR Sensor contains a user-replaceable CR2032 battery.
• To prolong the life of your heart rate monitor, detach the sensor and clean the strap after every use.

Sensors Pairing Heart Rate Sensor.

Rider 460 Specifications

www.thisisant.com/directory

Designed by Bryton Inc. Copyright © 2024 Bryton Inc.
All rights reserved. The content of this manual is subject to change without prior notice.

Install the Cadence Sensor (Optional)

Remove battery tab before use. The Bryton Smart Speed / Cadence Sensor contains a user-replaceable CR2032 battery.

Sensors Pairing _ Cadence Sensor

• Pairing Bryton Smart Sensors with Your ANT+ / BLE Devices After installing Bryton Smart Sensors, rotate crank and wheel a few times to wake Bryton Smart Sensors up. The sensors can only be paired when they are awake, or they would go back to sleep to preserve power.

Note :

1.  The pairing steps differ from each Bryton device. Please check its own user manual.
2. Please keep away from other ANT+ or BLE sensors while pairing.

Connecting to Your ANT+ / BLE Devices
After pairing, your Bryton devices automatically connect to Bryton Smart Sensors each time when the sensors are awake.

RF Exposure Information (MPE)

• This device meets the EU requirements and the International Commission on Non-lionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. To comply with the RF exposure requirements, this equipment must be operated in a minimum of 20 cm separation distance to the user. Hereby, Bryton Inc. declares that the radio equipment type Bryton product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.brytonsport.com/download/Docs/CeDocs_Rider460.pdf For more information on E-label regulations and compliance, as well as identification markers, relevant software, product and licensing information and other regulatory information provided by the FCC or regional compliance markings, please navigate to Settings > About.

• Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

• Note 2: The” O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

• Note 3: The “-” indicates that the restricted substance corresponds to the exemption

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>