bryton Rider 750 SE GPS Enabled Cycling Computer User Guide

bryton Rider 750 SE GPS Enabled Cycling Computer

Product Information

The Bryton Rider 750 SE is a cycling computer that features a 2.8-inch color TFT capacitive touchscreen display with a resolution of 240×400. The device is equipped with a rechargeable Li-polymer battery that offers up to 24 hours of battery life with an open sky. It also features wireless ANT+TM connectivity that is certified and compatible with various products listed on www.thisisant.com/directory.

Key Features

• 2.8-inch color TFT capacitive touchscreen display
• Rechargeable Li-polymer battery with up to 24 hours of battery life with open sky
• Wireless ANT+TM connectivity
• GPS navigation
• LiveTracking
• Radar Smart Trainer
• E-bike (Shimano) compatibility
• Route planning and navigation
• Cycling-specific data tracking and analysis

Specifications

240×400
Physical Size| 52x93x19.4mm
Weight| 93g
Battery| Rechargeable Li-polymer battery with up to 24 hours of battery
life with open sky
Operating Temperature| -10°C to 50°C

Product Usage Instructions

To start using the Bryton Rider 750 SE, follow these instructions:

Power On/Off

To turn on the device, press and hold the POWER/LOCK button. To turn off the device, long-press the POWER/LOCK button when the device is on.

Product Navigation

The device features GPS navigation. You can view the navigation data, such as distance, altitude gain, and climb section by swiping left or right. You can also zoom in and out of the map by using the zoom in/out buttons.

Data Tracking and Analysis
The Bryton Rider 750 SE tracks cycling-specific data such as speed, cadence, power, and calories burned. You can view this data on the device’s display by swiping left or right. To start recording your ride, press the RECORD/PAUSE button. To pause recording, press the same button again. You can choose to save or discard the ride by clicking on the screen.

Wireless ANT+TM Connectivity
The Bryton Rider 750 SE features wireless ANT+TM connectivity. You can connect with various compatible products listed on www.thisisant.com/directory.

Route Planning and Navigation
You can plan your routes and navigate using the device’s navigation feature. The device allows you to add a starting point, ending point, and even input an ID. You can also retrace your ride or challenge yourself to climb by using the Climb Challenge feature.

For more detailed instructions on using the Bryton Rider 750 SE, please refer to the user manual available for download at www.brytonsport.com.

Getting Started

Touch Screen Gestures

1. Swipe up from the very bottom of the screen to return to the Home Page from any screen.
2. Swipe left or right to switch data pages.
3. Tap to pop up quick status windows
4. Long press on data field to focus the data grid, then tap the field again to start editing.

Key Functions

POWER/LOCK  : Press to turn the device ON. When on, long press to turn the device off.Press to lock/unlock the screen.
PAGE DOWN ( < ): Press to page down.
RECORD/PAUSE  : Press to start recording. When recording, press to manually pause. Then you can choose to save/discard/resume the ride by clicking on the screen.
PAGE UP ( > ): Press to page up.

Reboot Rider

Press at the same time to reboot the device.

Getting Started
Please charge your device for at least 4 hours and make sure the device firmware is up to date* before first use.To begin Press to turn on the device. 2. Scroll through the list and select the display language. Select the units of measurement. 4. The device will automatically search for satellite signals.You can view the GPS signals status on the screen or the quick status. 5. After the GPS signal is fixed choose a profile to start the ride in free cycling mode. 6. To record, press to start recording.

• Check and update your device firmware version via Bryton Active app.
• To acquire GPS signals, allow the device access to an open sky, outdoor environment.

Data Sync
Sync Data to/from Bryton Active app With the Bluetooth connection, your Rider computer can upload recorded tracks, download planned trips, and update the firmware via Bryton Active app. It is required to add your device to your Bryton Active account before syncing data for the first time. To add. 1. Sign up / log in to your Bryton Active App account. 2. Go to “Settings” and click “+” to add a new device to your account. 3. Select your device and tap “Yes” to add your device to your Bryton Active account. 4. Your device is now successfully paired with the Bryton Active App. 5. Click the device icon to initiate the activity sync. You can enable the “Auto Sync Track” feature as well.

Upload / Share Your Tracks via USB

1. Connect the device to your computer via the included USB cable.
2. Select fit files from Bryton -> Activities folder in the device.
3. Upload files to brytonactive.com and popular training sites including STRAVA, TrainingPeaks, Endomondo, Map My Ride, Fit track and many more.

Preloaded Map
Rider 750 SE includes regional preloaded maps. If the region you need is not preloaded, you can download it by yourself. You can manage your map via Bryton Update Tool and Bryton Active app.

Navigation
With the full navigation features on Rider 750 SE, you can always stay safe on your planned tracks and never get lost again!

1. Select Navigation in the home page.
2. Select and speak your destination slowly and clearly. You can also manually pin a destination on the Map.
3. Results of the location search are shown on the list.
4. Select one location and select to start navigating.

Follow Track
Rider 750 SE provides 3 ways to create tracks. 1. Plan trip via Bryton Active App. 2. Import GPX track files via Bryton Active app. 3. Auto sync routes from Strava, Komoot, and RideWithGPS.

Plan trip via Bryton Active App

1. In the Bryton Active App, select “Course” >”My Route”> “Plan Trip” to set a Start point and Destination by tapping on the map or inputing address in the Search Bar.
2. After finishing planning, save the planned trip to “My Route” by tapping “Save”.
3. Go to “My Route” and tap the route. Click the “ ” to download it to the device.
4. In the Device Main Menu, navigate to “Course” > “Route”. Find the route and tap to start following the track.

Import GPX track files via Bryton Active App

1. Download routes in GPX format from any other source.
2. Select “Open in Active” (for iOS) or Open files with Bryton Active App (for Android).
3. Select “Course” > “My Route” in Bryton Active App. 4. Here you can see the routes imported to the App. 5. Click the “ ” to download it to the device. 6. In the Main Menu of the device, navigate to “Course” > “Route”. Find the route and tap to  start following the track.

Auto sync routes from Strava, Komoot and RideWithGPS

1. In the Bryton Active app, select “Course” >”My Route”>”3rd party account link”.
2. You can enable STRAVA/Komoot/RideWithGPS auto sync there.
3. Once authorized, you can see routes from those platforms in “My route” with their icons.
4. Click the to download it to the device.
5. In the Main Menu of the device, navigate to “Course” > “Route”. Find the route and tap  to start following the track.

Icon Description

Note:

• For Video Instructions, please go to www.brytonsport.com> (Menu) > Support > Tutorial.
• For User Manual, please go to www.brytonsport.com> (Menu) > Support > Download > Manual > User Manuals.

Rider 750 SE Specifications

RF Exposure Information (MPE)
This device meets the EU requirements and the International Commission on Non- Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. To comply with the RF exposure requirements, this equipment must be operated in a minimum of 20 cm separation distance to the user.

Hereby, Bryton Inc. declares that the radio equipment type Bryton product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.brytonsport.com/download/Docs/CeDocs_Rider750SE.pdf

For more information on E-label regulations and compliance, as well as identification markers, relevant software, product and licensing information and other regulatory information provided by the FCC or regional compliance markings, please navigate to Settings > About.

FCC

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example ‐ use only shielded interface cables when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement

• This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body.
• This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.
• The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS-247 standard. Operation is subject to the following two conditions:

1. This device may not cause interference,
2. This device must accept any interference, including interference that may cause undesired operation of the device.

QR SCAN

Download User Manual Download Bryton Active App

www.brytonsport.com

References

• Bryton
• Directory - THIS IS ANT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>