PHILIPS BDP104 LED50 Town Guide Performer Owner’s Manual
- July 31, 2024
- Philips
Table of Contents
Lighting
BDP104 LED50/830 DW PCF SI CLO 62P
INTRODUCTION
TOWNGUIDE PERF CLASSIC CONE, LED module 5000 lm, Distribution wide, Polycarbonate bowl/cover frosted, Constant light output, Post-top for diameter 62 mm
The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energy reduction programs. This includes LumiStep, DynaDimmer, and Line Switch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
Lamp family code| LED50 [LED module 5000 lm]
Light source replaceable| Yes
Number of gear units| 1 unit
Driver included| Yes
Photocell| –
Light source engine type| LED
Service tag| Yes
Product family code| BDP102 [TOWNGUIDE PERF CLASSIC CONE]
Lighting Technology| LED
Value ladder| Performance
Embedded control| Constant light output
CE mark| Yes
Warranty period| 5 years
Flammability mark| –
ENEC mark| ENEC mark
Glow-wire test| Temperature 650 °C, duration 5 s
EU RoHS compliant| Yes
Serviceability class| Class A, luminaire is equipped with serviceable parts
(when applicable): LED board, driver, control units, surge protection device,
optics, front cover and mechanical parts
Light Technical
Upward light output ratio| 10
Luminous Flux| 2,714 lm
Standard tilt angle post top| 0°
Standard tilt angle side entry| –
Correlated Color Temperature (Nom)| 3000 K
Luminous Efficacy (rated) (Nom)| 73 lm/W
Color rendering index (CRI)| 80
Number of light sources| 6
Light source color| 830 warm white
Optical cover type| Polycarbonate bowl/cover frosted
Luminaire light beam spread| 50° x 70°
Optic type outdoor| Distribution wide
Operating and Electrical
Input Voltage| 220-240 V
Line Frequency| 50 to 60 Hz
Initial CLO power consumption| 37 W
Average CLO power consumption| 38.5 W
End CLO power consumption| 40 W
Inrush current| 45 A
Inrush time| 0.285 ms
Power Consumption| 40 W
Power Factor (Fraction)| 0.95
Connection| Screw connection block 5-pole
Cable| –
Number of products on MCB of 16 A type B| 10
Temperature
Ambient temperature range| -40 to +35 °C
Controls and Dimming
Dimmable| No
Driver/power unit/transformer| Power supply unit regulating with constant
light output
Control interface| –
Constant light output| Yes
Mechanical and Housing
Housing Material| Aluminum
Reflector material| –
Optic material| Acrylate
Optical cover material| Polycarbonate
Fixation material| Steel
Housing Color| Silver
Mounting device| Post-top for diameter 62 mm
Optical cover shape| Conical
Optical cover finish| Frosted
Overall length| 570 mm
Overall width| 570 mm
Overall height| 317 mm
Overall diameter| 570 mm
Effective projected area| 0.088 m²
Dimensions (Height x Width x Depth)| 317 x 570 x 570 mm
Parts color| All parts colored
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jet proof]
Mech. impact protection code| IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential)| Luminaire surge protection level until
6 kV differential mode and 6 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class I
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromaticity| (0.43, 0.40) SDCM <5
Power consumption tolerance| +/-10%
Init. Color Rendering Index Tolerance| +/-2
Over Time Performance (IEC Compliant)
Driver failure rate at 5000 h| 0.5 %
Control gear failure rate at median useful life 100000 h| 10 %
Lumen maintenance at median useful life* 100000 h| 91
Application Conditions
Performance ambient temperature Tq| 25 °C
Maximum dim level| Not applicable
Product Data
Order product name| BDP102 LED50/830 DW PCF SI CLO 62P
Full product name| BDP102 LED50/830 DW PCF SI CLO 62P
Full product code| 871829191070100
Order code| 910500991131
Material Nr. (12NC)| 910500991131
Numerator – Quantity Per Pack| 1
EAN/UPC – Product/Case| 8718291910701
Customers Support
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, March 14 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>