MASTECH MS922D AC Line Splitter User Guide
- June 12, 2024
- MASTECH
Table of Contents
MASTECH MS922D AC Line Splitter
Product Information
- SKU Number: MS922DCBGLO
- Manufacturer: MGL Group
- Model: MS922D
- AC Line Splitter Type: EU
Product Usage Instructions
The following instructions should be followed when using the test and measurement instrument:
- Use proper measurement category (CAT), voltage, and amperage-rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads before use. Replace any leads with deteriorated insulation.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring the current, make sure the instrument fuses are available and disconnect the power supply to the circuit being tested.
- Remove the batteries if the device is not used for an extended period of time or if stored in temperatures below recommended levels.
Please refer to the product manual for further instructions and safety information.
Precautions
Special attention should be paid when using the test and measurement instrument because the improper usage may cause electric shock and damage the equipment.
- Use proper measurement category (CAT), voltage, and amperage-rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation is deteriorated (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring the current, make sure the instrument fuses available and disconnect the power supply to the circuit test
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
Contents
Specifications
- Range
- V~ /250V
- A~/15A
- X1 current terminal/Tests actual working current
- X10 current terminal/Tests working current x10
Installation Instructions
A~
V~
Power
LIMITED WARRANTY
- 1 YEAR LIMITED WARRANTY
Contacts
EMEA
- MGL EUMAN S.L.
- C/ Picu Castiellu, Parcelas i1-i4 33163, Argame Morcín, Asturias, Spain
- Tel: +34 985-08-18-70
- Email: cs.emea@mgl-intl.com
USA
- MGL AMERICA, INC.
- 2810 Coliseum Centre Drive, Ste. 100 Charlotte, North Carolina 28217 USA
- Tel: +1 833-533-5899
- Email: cs.na@mgl-intl.com
UNITED KINGDOM
- MGL GROUP U.K. LIMITED
- 14 Weller St, London, SE1 1QU, UK
- Tel: +34 985-08-18-70
- Email: cs.uk@mgl-intl.com
MEXICO & LATAM
- MGL LATAM S.A DE CV
- Colonia Industrial Vallejo Del. Azcapotzalco 02300, Mexico D.F
- Tel: +1 833-533-5899
- Email: cs.latam@mgl-intl.com
Scan
SKU Number: MS922DCBGLO
Specifications are subject to change without notification.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>