Enping FS-2023 Selectable Frequency UHF Wireless Microphone Instructions
- July 31, 2024
- Enping
Table of Contents
FS-2023 Selectable Frequency UHF Wireless Microphone
“`html
Product Specifications
-
Product Model: FS-2023
-
Frequency Range: UHF
-
Wireless Microphone Type: Selectable Frequency
-
Power Source: 2 AA batteries (for handheld microphone)
-
Output Connections: 1/4″ (6.35mm) Mixed Output, XLR Audio
Output -
Number of Channels: 16
Product Usage Instructions
Receiver Operation:
-
Turn on the Receiver using the ON/OFF Power Switch.
-
Adjust the Volume Control to set the desired audio level.
-
Monitor the RF Signal Indicator to ensure a stable
connection. -
Use the Frequency Selectable Button to choose from the 16
available channels. -
Connect your audio equipment to the 1/4″ (6.35mm) Mixed Output
or XLR Audio Output.
Transmitter Operation:
-
Insert 2 AA batteries into the Handheld Microphone’s Battery
Compartment. -
Turn on the Handheld Mic using the ON/OFF Switch.
-
Check the LED Frequency Display to confirm the selected
frequency.
Frequently Asked Questions (FAQ)
Q: How do I change the frequency on the handheld
microphone?
A: Use the Frequency Selectable Button on the receiver to change
the frequency that corresponds to the handheld microphone.
Q: What should I do if I experience interference during
operation?
A: Try changing the channel on both the receiver and transmitter
to avoid interference from other devices. Additionally, ensure that
the antennas are properly positioned for optimal signal
reception.
“`
FS-2023 SELECTABLE FREQUENCY UHF WIRELESS MICROPHONE
WELCOME
The system provides clear, noise-free wireless transmission and excellent
sound reproduction. Simple setup and installation will have you streaming
clear sound in no time. System functions include handheld microphone , UHF
signal transmission, high signal-to-noise ratio performance, etc. Enjoy two-
channel voice distribution across transmitters. Whether it is for work or
entertainment, whether it is a small stage vocal performance or a conference
room speech,this wireless microphone system will provide you with a high-
quality audio experience. Enjoy hassle-free, reliable wireless sound
transmission with today’s latest system technology in an all-in-one kit. It
can be connected to power amplifiers, mixers, active speakers and other
equipment. Suitable for small stage, church, meeting, party, karaoke.
INTRODUCTION OF RECEIVER AND TRANSMITTER
1. Receiver ON/OFF Power Switch
7. 1/4″ (6.35mm) Mixed Output
2. Antenna
8. Power input
3. Receiver Frequency Display
9. Handheld Mic LED Frequency Display
4. RF Signal Indicator
10. Handheld Mic ON/OFF Switch
5. Volume Control
11. Frequency Selectable Button (16 CH)
6. XLR Audio Output
12. Battery Compartment (2 AA batteries)
Operation of the receiver:
1. Connect the power adapter with the Power input . Then Plug the power
adapter into a power socket. 2. Use the Audio Cable to connect the receiver
1/4″ output and 1/4″ input of a mixer or active speaker. 3. Pull out antenna A
& B , make it vertically. 4. Turn ON the ON/OFF power switch and the Frequency
Display Screen is bright. 5. When turn on the microphone, the receiver RF
Signal Indicator is lit. 6. The sound volume could be adjusted by the volume
control knobs 7. Please unplug the power adapter if you don’t use for a long
time.
Operation of the transmitter:
1.Open the battery compartment cover (12) , install 2PCS AA batteries
correctly, then cover it. 2.Turn ON the ON/OFF Power switch when using,the LED
Frequency display is lit. 3.If other system is using the same frequency, or
the signal is not good. Please change the frequency by the Frequency
Selectable Button(11). There are 16 channels per each microphone. 4.If battery
icon is become “empty”, please replace the batteries. 5.Please take out the
batteries if you don’t use transmitter for long time.
SPECIFICATIONS Channel Frequency:470.2 ~ 607.7MHz Pickup/Polar Pattern: Uni-
Directional Impedance: 600 Ohms ± 30% Frequency Response:50~15KHz±3
Sensitivity:-95dBm (S/N:12dB) RF Image Rejection:-75dB Audio Dynamic Range:
95dB T.H.D.:<1% Frequency Stability:±0.002% S/N Ratio:>70dB Interference:>70dB
Output power: <10 mW Power Adapter: AC 90-240V,50Hz-60Hz, DC 12V Transmitter
Power Supply: 2 x AA battery Wireless Range: Up to 50 meters
TROUBLE SHOOTING Check the following items before contacting a dealer. If the
trouble is not improved, contact us. NO sound, the receiver’s RF indicator
does not light up. ·Make sure the transmitter power switch is ON and the
receiver is plugged in. (Push up the switch of the hand-held microphone) ·
Check that the battery is installed. And make sure the battery is fully
charged. · Check that the frequency on the transmitter matches the frequency
on the receiver.
No sound, the receiver’s RF indicator is on. ·Turn up the receiver audio
volume control. Also turn up the volume control of other connected devices.
·Check that the connection between the receiver and the mixer or other
equipment is correct.
Receiver signal is noisy or contains extraneous sounds with transmitter on.
·Check if the battery is low. ·Check for other sources of RF interference
causing interference. · If using a guitar or other musical instrument, check
the connections. If multiple transmitters are used together,it is possible
that multiple transmitters are operated on the same frequency. Please change
the frequency. · Find the same frequency point, close the others, and only
keep one of them. ·Signal may be too weak. Reposition the antenna. Move them
closer to the transmitter if possible.
Noise from receiver with transmitter off. ·Check for other sources of RF
interference causing interference. -It is recommended to replace the audio
cable with a better quality. ·Test other equipment connected to the receiver
for problems.
Momentary loss/stop of sound as transmitter is moved around performing area.
·Reposition the receiver and perform another “drill” test and observe the RF
indicator. If audio loss
persists, mark these “dead spots” in the performance area and avoid them
during the performance.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.
- RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>