Enping Weiteng Audio Equipment Factory AR2090 In-Ear Monitor System User Manual

Enping Weiteng Audio Equipment Factory AR2090 In-Ear Monitor System

Specifications

• Model: 550-600
• Compliance: Part 15 of FCC Rules
• Operating Conditions: Avoid harmful interference
• Radiation Exposure: FCC limits for an uncontrolled environment
• Minimum Distance: 20cm between radiator and body

Radiation Exposure Guidelines

To maintain compliance with FCC radiation exposure limits, it is recommended to:

• Install and operate the equipment in an uncontrolled environment.
• Maintain a minimum distance of 20cm between the radiator and your body during operation.

FAQ (Frequently Asked Questions)

Q: Can I modify the device for enhanced performance?|
A: No, any modifications not approved may void your authority to operate the equipment.

IN-EAR MONITOR SYSTEMS

The specification won’t do and further notice for the improvement Actual product will not be as pictured

USER INSTRUCTION

In uses the unit before.please read the instruction manual carefully and keep the instruction manual properly in order to need in future.

Preface

Thank you for choosing our multi-channel microphone products.
In order to guarantee you use this product well, please read this instruction booklet carefully before using, and understand correct operating procedures, to obtain the best effect.

Security and Environment

1. . Keep the facility under cool conditions, and do not put this machine in the site which is high temperature,moist, dusty or close to liquid stuff.
2. Do not open the machine in case Fire, electric shock risk.
3.  Only can use the power adapter which the machine offers and confirm whether the working power voltage is fit for adapter access specification. It may be damage if using adapter that supply by other distributor.
4.  Turn off the machine and pull out the adapter when you leave for long time.

Product presentation

1. This wireless Ear-monitor System is used in stage performances and sound broadcasts which can replace traditional complex sound monitoring equipment, achieve the admirable listening effect.
2. With using the latest high-frequency transmission and audio signal dynamic processing technology, also improves the signal­to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.

Main features

• UHF band Phase lock PLL
• Among the band of 32MHz, the preset 40 frequencies can be arbitrary switching
• Dynamic expansion circuit, greatly improves signal-to-noise ratio
• Elegant liquid crystal display panel
• With power and RF receiving indicator lamp
• With using two No. 5 batteries and an efficient power circuit, long service time
• Metal housing, sturdy and durable
• The transmitter adopts balanced and unbalanced sharing socket
• The transmitter is with output monitoring phone jack

Main function
The system consists of a mini receiver and transmitter combination, and its main function and characteristics are described below:

• Among the band of 32MHz, you can preset 40 frequencies which can be arbitrary switching.
• With using advanced circuit design, clear the receiving blind angle to make the system’s receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the best choice of stage performance monitor product.

The front panel instruction of single channel receiver

1. Power switch
2. Function setting key : choose the function of setting
3. LCD display: show the operation of each item and setting the content
4. USB function setting key : adjusted the function of USB play , volume control etc.
5.  Earphone volume potentiometer: adjusted the volume of the earphone
6. 6.3 earphone output socket : connecting the stereo earphone, monitoring the output signal
7. USB socket: connecting USB disk, MP3 audio frequency input
8. USB indicate light : to indicate the working condition of USB disk

The back side panel instruction of single channel receiver

1. Antenna
2. Right channel potentiometer: adjusted volume
3. Left channel potentiometer: adjusted volume
4. Right channel output : can use balanced and unbalanced
5. Left channel output: can use balanced and unbalanced
6. DC power: connecting 12V DC power input socket , the voltage of the outlet center is positive voltage

TIie instruction way bl use single channel transmitter

1. Turn on / off : long press the button “POWER”

2. Group choosing : to left or right to choose the frequency range you need.

3. Channel choosing : CD , turned” “to left or right to choose the frequency range you need.
   4. USB using method :

4. Start/pause USB: insert USB or MP3, pressed lightly –

5. Choose music: turned  -to left or right to choose last or next song

6.  Adjusted USB volume: turned to left or right to decrease or increase volume.

Single Channel Deskblp Transmmer Front View

1. 6.35mm headphone output: connect stereo headphones, monitor the output signal
2. Headphone volume potentiometer: adjust stereo headphone volume
3. SET selection: choose the setting function
4. LED: display operation and content
5. DOWN selection: choose the setting function
6. Power switch: turn on/turn off

Single Channel Deskblp Transmiller Dack View

1.  DC power socket: connect with 12V DC power input socket, the socket center connect positive voltage
2. The left channel: balanced and unbalanced sharing input
3. The right channel: balanced and unbalanced sharing input
4.  Left volume adjustment potentiometer
5. Right volume control potentiometer
6. Antenna

Double Channel Deskblp Transmiller Front View

1. 6.35mm headphone output: connect stereo headphones, monitor output signal

2. Headphone volume potentiometer: adjust stereo headphone volume

3.  SET selection: choose the setting function

4. LED: display operation and content

5.  DOWN selection: choose the setting function

6. Power switch: turn on/turn off
   Double Channel Deskblp Transmiller Dack View

7. DC power socket: connect with 12V DC power input socket, the socket center connect positive voltage

8. The left channel: balanced and unbalanced sharing input

9. The right channel: balanced and unbalanced sharing input

10. Left volume adjustment potentiometer

11. Right volume control potentiometer

12. Antenna

Bodypack Transmiller

1. LED: Display working content
2. UP selection: choose setting function
3. DOWN selection: choose setting function
4. SET selection: choose the setting function
5. Power switch: turn on/turn off
6. Battery warehouse: after inserting two number 5 batteries, cover it
7. low voltage indicator lamp: batteries work out
8. Volume peak indicator light
9. Mic input in
10. Mute switch
11. Antenna

Bodypack Receiver

1. LED: Display working content
2. UP selection: choose setting function
3. DOWN selection: choose the setting function
4. SET selection: choose setting function
5. Power switch: turn on/turn off
6. Battery warehouse: after inserting two number 5 batteries, cover it
7. low voltage indicator lamp: batteries work out
8. RF indicator light: indicates receiving signal information
9. Power switch+ volume potentiometer: turn on or turn off and adjust the volume
10. 3.5mm headphone output: connect headphones
11. Antenna: assemble fixed antenna

Usage Illustration Instruction

Desktop Transmitter Settings

1. Turn on/Turn off: long press POWER button
2. Group selection: 1 SET or press   2 Reverse to the left or right
3. Channel selection:2 2xSET or press 2x 2 Reverse to the left or right

Bodypack Transmitter Settings

1. Turn on/Turn off:long press ON/OFF
2. Group selection:
3. Channel selection:

Bodypack Receiver Settings

1. Turn on/Turn off: Rotate volume potentiometer

2. Group selection:  1SET ESC

3. Channel selection:  2 xS ET 3 ESC

Technical Date

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>