Enping SG-108A Wireless Microphone Instruction Manual
- June 3, 2024
- Enping
Table of Contents
Enping SG-108A Wireless Microphone Instruction Manual
Thank you very Touch for your purchased the digital products of the company. In order b make you give full play to the machine to provide all of the features, please read the instructions carefully and complete set 671 Please keep this manual for future reference Mien necessary.
NAME PARTS
(HANDHELDÂ MICROPHONE)
- MIC grill: speak and sing in here.
- LCD display: display the current working condition, frequency, ETC.
- Power switch: turn on / turn off.
- Battery cover: open the bottom cover, put in AA*2 batteries.
- Dampling ring: when the MIC drop it, can protect the MIC to reduce damage.
- Set frequency switch: use with power switch.
OPERATION
- Use the audio cable to insert the receiver and speaker or amplifier
- Receiver and handheld mic are in the shutdown state, long press handheld mic FREQUENCY SWITCH, and long press handheld mic power switch, until the screen flashes, release the button.
- Turn on the receiver power, then the receiver frequency indicator flashed 4 times, when it is stop flashing, press the handheld mic FREQUENCY SWITCH again. THE RECEIVER LED is long bright, that mean the receiver and handheld mic is connection success.
If the frequency indicator light is not on, please repeat the above operation
ATTENTIONS
- Do not throw the product into the water or fire.
- Do not use in anti-interference site of hospital, near airport.
- Please do not disassemble the product, otherwise, you will lose the right to warranty.
- Fir internal repairs, consult your dealer or an authorized service center.
Product Certificate
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.