FIELDMANN FDPO 200711-E Electrical Reciprocating Saw User Manual

FIELDMANN FDPO 200711-E Electrical Reciprocating Saw

Product Information

Specifications

• Model: FDPO 200711-E
• Type: Electrical Reciprocating Saw
• Features: On/Off switch, Locking button, Locking for speed, Saw blade, Soleplate, Blade holder, Lever to adjust the soleplate, LED working light
• Items Delivered: Reciprocating Saw, 2 saw blades, Warranty card, EC declaration, Instruction Manual

Product Usage Instructions

General Safety Instructions
Before using the Electrical Reciprocating Saw, carefully read the user manual and adhere to the safety instructions provided.

Machine Description

1. Ensure all items are included in the package and there is no damage.
2. Identify the different parts of the saw: On/Off switch, Locking button, Saw blade, Soleplate, Blade holder, etc.
3. Inspect the saw blade and soleplate for any defects before use.

Operating Instructions

1. Insert the saw blade securely into the blade holder.
2. Adjust the soleplate lever to set the cutting angle if necessary.
3. Turn on the saw using the On/Off switch.
4. Press and hold the locking button while operating the saw.
5. Use the LED working light for better visibility in dimly lit areas.

FAQ

• What should I do if any components are missing or damaged?
  If any components are missing or damaged, contact the dealer of the machine for assistance.

• Can I change parts of the tool or perform repairs on my own?
  It is recommended not to change parts or perform repairs on your own. Leave tool repairs to qualified persons or certified service centers to ensure safety.

GENERAL SAFETY INSTRUCTIONS

WARNING!
Carefully read the instruction manual before use.

Important safety warnings

• Unpack the product carefully and be sure not to throw away any part of the package before having found all components of the product.
• Keep the product in a dry place out of reach of children.
• Read all cautions and instructions. The failure to adhere to warning cautions and instructions may result in an accident, fi re and/or a serious injury.

Packaging
The product is placed in a package preventing damage during transport. This package is a raw material therefore it can be handed-over for recycling.

Instructions for use

• Before beginning to work with the machine, read the following safety rules and instructions for use. Familiarize with operating elements and the proper use of the device. Keep the manual in a safe place for future reference. We recommend keeping the original package including the inner packaging materials, cash voucher and guarantee card for a period of warranty at minimum.
• For a case of transportation, pack the machine into the original box from the manufacturer, thus ensuring a maximum protection of the product during a possible transport (e.g. moving or sending into a service station).

Note:

• If you hand the machine over to next persons, hand it over together with the manual. Adherence to the attached instructions for use is a precondition for the proper use of the machine. The operation manual includes also instructions for operation, maintenance and repairs.
• The manufacturer does not take any responsibility for accidents or damages resulting from the failure to adhere to this manual.

SYMBOLS

MACHINE DESCRIPTION AND ITEMS DELIVERED

1. On/Off switch
2. Locking button
3. Locking for speed
4. Saw blade
5.  Soleplate
6. Blade holder
7. Lever to adjust the soleplate
8. LED working light

Items Delivered
Remove all contents from the box and inspect to ensure no damage was incurred during shipping, and that the items listed below are included.

• Reciprocating Saw
• 2 saw blade
• Warranty card
• EC declaration
• Instruction Manual
  Should the components be missing or damaged, contact the dealer of the machine.

GENERAL SAFETY INSTRUCTIONS

Please read these safety instructions carefully, remember them and keep them in a safe place.

WARNING!
When using electric machinery and power tools, it is important to abide by and adhere to the following safety instructions for reasons of protection against injury caused by electric current, injury of persons and risk of starting fires. The term “power tools” used in the instructions below refers to power tools that are plugged into a power supply (by a power cord) as well as tools running on a battery pack (cordless). Keep all warnings and instructions for further use.

Work environment

• Keep the work area clean and well lit. Untidiness and dark places on the job site are usually causes of accidents. Store tools that are not used.
• Do not use power tools in an environment where there is risk of starting a fi re or explosion; this refers to places where there are fl ammable liquids, gases or dust. Sparks form on the power tool’s commutator, which can cause dust or fume ignition.
• When using power tools, unauthorized persons, especially children, should be denied entry to the job site! In case you are interrupted, you can lose control of the current activity. In any case, do not leave the power tool without supervision. Prevent animals from approaching the equipment.

Electrical safety

• The power tool’s power plug must correspond to the power outlet. Never alter the plug in any way. If the tool’s plug has a safety peg, never use an adapter of any kind. Undamaged plugs and corresponding outlets prevent the risk of injury by electric current. If the power cord is damaged, it must be replaced by a new power cord that can be obtained from an authorized service centre or the importer.
• Avoid bodily contact with grounded items, e.g. piping, radiators, kitchen ranges and refrigerators. The risk of injury by electric current is greater if your body is connected to the ground.
• Do not expose power tools to rain, moisture or dampness. Never touch power tools with wet hands. Never wash power tools with running water and never submerse them into water.
• Do not use the power cord for any other purpose than originally intended. Never carry or pull the power tools by the power cord. Do not pull the plug out of the outlet by pulling on the cord. Avoid mechanical damage to the power cord by sharp or hot objects.
• Power tools were manufactured exclusively for the AC power supply. Always check if the electrical voltage corresponds to the data printed on the tool’s serial number label.
• Never work with a tool that has a damaged power cord or plug, or that has fallen on the ground and is damaged in any way.
• In the case of using an extension cord, always check that its technical parameters correspond to the data printed on the tool’s serial number label. If the power tool is used outdoors, use an extension cord that is appropriate for exterior use. When using an extension cable drum, the cord must be unwound to prevent the cord from overheating.
• If the power tool is used in moist areas or outdoors, it is permitted to use it only if it is plugged into an electric circuit with a residual current device ≤30 mA. Using a circuit with an RCD lowers the risk of injury by electric current.
• Store unused power tools so that they are out of the reach of children and unauthorized persons. Power tools in the hands of inexperienced users can be dangerous. Store power tools in a dry and safe place.
• Keep power tools in good condition. Regularly check the setting of moving parts and their movability. Check if the protective cover or other parts that can limit the safe functioning of the power tool are not damaged. If the tool is damaged, ensure its proper repair before the next use. Many injuries are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained and sharpened tools make work easier, limit the risk of injury and work with them is much more easily controlled. Using other accessories than those listed in the instruction manual can cause damage to the tool and can cause injury.
• Use power tools, accessories, work tools, etc. in accordance with these instructions and in a way that is described for the specifi c power tool and with regard to the given working conditions and the type of job. Using tools for other purposes than those intended can lead to dangerous situations.

Service

• Do not change parts of the tool, do not perform repairs on your own and do not interfere with the tool’s construction in any way. Leave tool repairs to qualifi ed persons.
• Each repair or product modifi cation performed without our company’s permission is inadmissible (it can cause injury or harm to the user).
• Always leave tools to be repaired in a certifi ed service centre. Use only original or recommended spare parts. This will ensure your and your tool’s safety.

BEFORE STARTING THE EQUIPMENT

Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data.
Always pull the power plug before making adjustments to the equipment.

Changing the saw blade (B2)

• Always switch off and unplug the reciprocating saw before working on the machine or changing the saw blade.
• Turn the ring on the blade holder (6) as shown in Fig. 2 until the blade lets itself be slipped into the slot of the blade holder (6).
• When you now let go of the ring again, the ring should return to its starting position.
• If this fails to happen, try turning the ring by hand into its starting position.
• Pull on the blade to check whether it sits tightly in the holder.

Adjusting the soleplate (B2)

• Loosen the lever(8), pull or push the soleplate to a desired position.
• Push the lever(8) back.
• Check that the soleplate is secure.

Electronic speed control (B3)

• By increasing pressing the on / off switch (1), the speed increases.
• With the speed selection (3) in the ON / OFF switch (1), the desired speed can be selected.
  Turn toward +: higher speed
  Turn towards -: lower speed

OPERATIONAL

ON/OFF switch (B3)

• To switch on:
  Press the ON/OFF switch (1)

• To switch off:
  Release the ON/OFF switch (1)

Locking button (B3)
You can lock the ON/OFF switch (1) using the locking button (2) when the equipment is in operation. To lock it, press the ON/OFF switch. To switch off the equipment briefl y hold down the ON/OFF switch.

Use as a jigsaw (B5)
Place the reciprocating saw on the material to be cut as shown in Fig. 5. Switch on the reciprocating saw and push it along against the material to be cut. Adapt your cutting speed to the material.

LED lamp
The LED light (9) makes it possible to illuminate working in unfavorable lighting conditions. The LED light (9) lights up automatically as soon as you put the plug in the socket.

Replacing the power cable
If the power cable for this equipment is damaged, it must be replaced by the manufacturer or its aftersales service or similarly trained personnel to avoid danger.

TECHNICAL DATA

CLEANING AND MAINTENANCE

Always pull out the mains power plug before starting any cleaning work.

Cleaning

• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
• Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
• We recommend that you clean the device immediately each time you have fi nished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device.

Carbon brushes
In case of excessive sparking, have the carbon brushes checked only by a qualifi ed electrician.
IMPORTANT
The carbon brushes should not be rep laced by anyone but a qualifi ed electrician.

Maintenance
There are no parts inside the equipment which require additional maintenance.

DISPOSAL

INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALS

• Dispose of used packaging material at a site designated for waste in your municipality.
• The appliance and its accessories are manufactured from various materials, e.g. metal and plastic.
• Take damaged parts to a recycling centre. Inquire at the relevant government department.
• This appliance meets all the basic requirements of the EU directives.
• Changes in the text, design and technical specifi cations may be made without prior notice and we reserve the right to make these changes.
  User manual in the original language

References

• TCPDF
• Tehnoteka - Poređenje cena i karakteristika - Kupujte pametno
• Tehnoteka - Poređenje cena i karakteristika - Kupujte pametno

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>