8BitDo Retro 18 Mechanical Numpad Instruction Manual

8BitDo Retro 18 Mechanical Numpad

Retro 18 Mechanical Numpad

System requirement: devices that support Bluetooth• Low Energy or USB port.

1. Mode switch
2. Connection indicator
3. Calculator mode button
4. SOC (%)
5. INPUT(W)
6. Charging port (USB Type-C)
7. Pair button
8. Windows calculator shortcut
9. Calculator mode indicator
10. Power LED
11. 2.4G adapter / Adapter compartment

Number Lock on/off

Connection

1. Turn the Mode switch to 2.4.
2. Connect the 2.4G adapter to the USB port of your device.
3. The Connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection

Follow the steps below to re-pair the numpad with the adapter:

1. Turn the Mode switch to 2.4 2. Connect the
2. 4G adapter to the USB port of your device.
3. Hold the Pair button for 3 seconds to enter the pairing mode, the Connection indicator starts to blink rapidly.
4. Wait for the numpad to automatically pair with the adapter. The Connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection.

Wired Connection

1. Turn the Mode switch to OFF.
2. Connect the numpad to the USB port of your device using the USB cable and wait until the numpad is successfully recognized by your device before using it.

Bluetooth Connection

1. Turn the Mode switch to BT.
2. Press and hold the Pair button for 3 seconds until the Connection indicator blinks rapidly to enter the pairing mode. (Pairing is only required for1irst-time connection
3.  Go to your device’s Bluetooth list and pair with [8BitDo Retro 18 Numpad].
4. The Connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection.

Calculator Mode

• All keys on the numpad will transform into regular calculator function keys when the “Calculator mode” is activated. All keys will not be recognized by your connected device.
• Press the Calculator mode button to enter the Calculator Mode, the Calculator mode indicator will become solid. The Calculator mode indicator will turn off when switching  between connection modes, powering off, or pressing the Calculator mode button to exit the Calculator Mode.

Battery

• Status Power status indicator
• Low battery   LED blinks
• Battery charging  LED breathing
• Fully charged LED stays solid

Built-in 1000mAh rechargeable lithium polymer battery with 160 hours of playtime, with a charging time of 4 hours.

Safety Warnings

• Please always use batteries, chargers, and accessories provided by the manufacturer.
• The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
• Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
• Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
• Any unauthorized changes or modifications to the device will void the manufacturer’s warranty.

Firmware Update

Please visit app.Bbitdo.com to download the Ultimate Software V2 to access the latest firmware.

Support
Please visit support.Bbitdo.com for further information and additional support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>