FA220 Series Fan

“`html

Product Information

Specifications

• Product: FAN FA220 Series
• Usage: Suitable for outdoor use & household use only
• Rain Resistance: IPX4 (excluding the remote)

Product Usage Instructions

Charging Instructions

1. Only recharge the battery with the charger supplied with the
   unit.

2. Use the specified battery charger model GQ36-120300-ABO from
   Donguan Gangqi Electronic Co., Ltd.

3. Do not use a charger that is not intended for the specific
   battery type to prevent the risk of fire.

Safety Guidelines

1. Operate the fan on a stable and level surface.

2. Avoid using the fan near water sources like pools, bathtubs, or
   basins.

3. Do not operate the unit with damaged power supply wires or
   battery chargers.

4. Keep the charger cord away from high-traffic areas to prevent
   tripping hazards.

5. Children should not play with the appliance and should be
   supervised at all times.

6. Unplug the appliance before cleaning or performing
   maintenance.

Maintenance Instructions

1. Hand wash exterior/hard plastic/non-electronic parts with water
   only, avoiding immersion.

2. Do not use chemicals for cleaning as they may damage the
   unit.

3. Do not attempt to repair or adjust any electrical or mechanical
   functions yourself.

Additional Warnings

Not suitable for use with solid-state speed control or variable
control switches.

FAQs

Q: Can I use this fan near water sources?

A: No, it is advised not to use the fan near pools, bathtubs,
showers, basins, or other vessels containing water to avoid
accidents.

Q: What should I do if the charger cord is damaged?

A: If the charger cord is damaged, it should be replaced to
prevent any electrical hazards during use.

“`

FAN FA220 Series
OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS
SUITABLE FOR OUTDOOR USE & HOUSEHOLD USE ONLY.

IPX4 IPX4 RAIN RESISTANT (EXCLUDING THE REMOTE)

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: READ ALL THESE INSTRUCTIONS BEFORE USE.

1. This appliance is operated by a rechargeable battery. ONLY recharge the battery with the charger supplied with the unit, battery charger for use only with model GQ36-120300-ABO power supply Donguan Gangqi Electronic Co., Ltd. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
2. DO NOT attempt to destroy, remove, or disassemble the battery pack from the machine. DO NOT incinerate battery cells. Consult your local waste authority for information regarding available recycling and/or disposal options.
3. This appliance comes with a remote control which contains a coin battery. Dispose of batteries properly. Always keep batteries away from children (choke hazard). Even used batteries can cause injury.
4. To reduce the risk of an electric shock, connect only to an outlet provided with a Residual Current Device (RCD).
5. The fan should be used on a stable and level surface.
6. Never use this fan near pools, bathtubs, showers, basins, or other vessels containing water.
7. DO NOT operate any unit with a damaged power supply wire or battery charger. Discard the unit or return to an authorised a third party service facility for examination and/or repair.
8. DO NOT run cord under carpeting. DO NOT cover charge cord with throw rugs, runners, or similar coverings. DO NOT route charger cord under furniture or appliances. Keep charger cord away from high-traffic areas. Place charger in an area where the cord will not be tripped over.
9. If the charger cord is damaged, it should be replaced.
10. This appliance is not intended for use by anyone (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
11. Children should be supervised to ensure that they DO NOT play with the appliance.
12. Cleaning and user maintenance shall not be made by children without supervision.
13. Prior to cleaning or other maintenance, the appliance must be unplugged from the electrical outlet.
14. Only use Shark branded accessories.
15. DO NOT use if appliance is not working as it should, or has been dropped, damaged, left outdoors for extended periods of time in poor weather without the protective cover installed or dropped into water.
16. Turn off all controls before plugging in or unplugging the appliance.
17. Unplug from electrical outlet when not in use and before any maintenance or cleaning.
18. Hand wash exterior/hard plastic/non-electronic parts with water only. DO NOT immerse. Cleaning with chemicals could damage the unit.
19. DO NOT attempt to repair or adjust any electrical or mechanical functions of this appliance, as this may cause danger and void the warranty.

WARNING: Chemical Burn Hazard. Keep batteries away from children. Dispose of coin cell batteries according to local regulations. Even used batteries can cause injury. This product contains a lithium coin cell battery. If a new or used lithium coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. After changing batteries, always completely close and secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the battery, and keep it away from children. If you think a battery might have been swallowed or placed inside any part of the body, seek immediate medical attention.

WARNING: Not suitable for use with solid-state speed control or a variable control switch.

LITHIUM BATTERY SAFETY WARNINGS

LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGY AND WILL VENT FIRE OR EXPLODE IF MISTREATED.

1. DO NOT DO ANY OF THE FOLLOWING TO THE BATTERY PACK:

a. Open b. Drop c. Short-circuit
2. Keep battery pack dry.

d. Puncture e. Incinerate e. Expose to temperatures
below 0°C and above 60°C

3. Charge battery pack only according to its charger’s instructions.

4. Inspect battery pack before every use: DO NOT use or charge if damaged.

BATTERY REMOVAL AND DISPOSAL
This product contains an integral lithium battery (not replaceable), and the remote control uses a lithium coin battery. When the remote battery no longer has a charge, it should be removed from the remote and recycled. DO NOT incinerate or compost the product with its integral battery or the remote battery. When your remote battery needs to be replaced, dispose of it or recycle it in accordance with local ordinances or regulations. In some areas, it is illegal to place spent lithium batteries in the rubbish bin or in a municipal solid waste stream. Return spent battery to an authorised recycling centre or to retailer for recycling. Contact your local recycling centre for information on where to drop off the spent battery. This appliance contains an integral battery that is non-replaceable. When the battery is at end of life, the appliance shall be properly disposed of.

POWER SUPPLY SAFETY
1. Read and follow all instructions that are on the product or provided with the product.
2. DO NOT use an extension cord.
3. DO NOT use within 3 metres of pool and DO NOT use in a bathroom.
4. WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A RCD protected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord DO NOT interfere with closing the receptacle cover.

READ AND SAVE THESE INSTRUCTIONS
© 2024 SharkNinja Operating LLC. SHARK is a registered trademark in the United Kingdom of SHARKNINJA Operating LLC. FA220UK_IB_MP_240208_Mv2

BATTERY WARNING
KEEP OUT OF REACH OF CHILDREN Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.

2

IMPORTANT SAFETY INSTRUCTIONS
FAN ACCESSORIES
SYMPTOMS FROM BATTERY INGESTION No obvious symptoms Unfortunately, it is not obvious when a button or coin battery is stuck in a child’s oesophagus (food pipe). There are no specific symptoms associated with this. The child might: · cough, gag or drool a lot; · appear to have a stomach upset or a virus; · be sick; · point to their throat or stomach; · have a pain in their abdomen, chest or throat; · be tired or lethargic; · be quieter or more clingy than usual or otherwise “not themselves”; · lose their appetite or have a reduced appetite; and · not want to eat solid food / be unable to eat solid food.
These sorts of symptoms vary or fluctuate, with the pain increasing and then subsiding.
A specific symptom to button and coin battery ingestion is vomiting fresh (bright red) blood. If the child does this seek immediate medical help.
The lack of clear symptoms is why it is important to be vigilant with “flat” or spare button or coin batteries int he home and the products that contain them.
OUTDOOR COVER 1. The fan cover is not a toy. Children should not play with it as it may become unsanitary
during outdoor use. 2. CHOKING HAZARD: Children should not play with the cover as they could choke on the
draw string.
MISTING ACCESSORY 3. The mister is suitable for outdoor use only. 4. The mister output is not controlled by the fan power. The mister will continue to
operate when fan is powered off. 5. DO NOT operate the mister using water pressure above 4.1 bar. 6. DO NOT operate the mister using warm or hot water. Only use cold or room
temperature water. 7. DO NOT handle live electrical products in the misting stream. 8. Keep non waterproof electronic equipment and appliances out of the mister stream. 9. Children should be supervised to ensure that they DO NOT play with the mister
accessory. 10. WARNING CHOKING HAZARD: Be conscience of the nozzle placement after
removing when cleaning Ensure children do not have access to the nozzles. 11. The cleaning and user maintenance of the mister shall not be done by children
without supervision.
READ AND SAVE THESE INSTRUCTIONS
3

Shark® FLEXBREEZE Product Information
According to: Commission Regulation (EU) 206/2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to eco- design requirements for air conditioners and comfort fans.

NOTE
Table Floor

DESCRIPTION Maximum Fan Flow Rate
Fan Power Input Service Value
Standby Power Consumption Fan Sound Power Level Fan Sound Power Level Maximum Air Velocity
Measurement standard for service value

SYMBOL F P SV PSB LWA LWA c

VALUE 26.66 15.90 1.68 0.23 58.73 57.53 4.012 IEC 60879

UNIT m3/min
W (m3/min)/W
W dB(A) dB(A)
m/s

4

A. FAN HEAD

Shark® FLEXBREEZE Fan Instructions

B. POLE (2 CONNECTED PCS)

WHAT’S INCLUDED

D. BASE

E. BOLT

G. REMOTE H. COVER

I. MISTING ACCESSORY

C. CHARGER

F. HEX KEY

SETTING UP YOUR FAN

1

A2

3

4

5

B

1. Align and insert the

2. Align the yellow dot

3. Insert the BOLT in the

Upper Pole into the

on the assembled pole

bottom of the BASE

Lower Pole until it clicks

with the yellow dot on

and twist the HEX KEY

into place.

the BASE, slide the pole

clockwise to fasten it to

down onto the base.

the assembled pole.

4. CAUTION: finger pinch risk. Insert the fan post into the top of the ASSEMBLED POLE until it clicks into place.

5. Charge fan to 100% battery before use without the cord. FIRST USE: before using remote control, press POWER BUTTON on fan.

HOW TO USE YOUR FAN

Fan Speeds

1-5 Strong Breeze Mode
Gentle Breeze Mode

Press to switch between fan speeds 1-5. LED lights will appear to indicate the fan speed level. (REMOTE ONLY) Press and hold for 3 seconds for strong breeze mode.
(REMOTE ONLY) Press and hold for 3 seconds for gentle breeze mode.

Oscillation Settings

1 – 45° angle

2 – 90° angle

3 – 180° angle

Press to toggle between oscillation angles.
LED lights will indicate which angle is selected.

(REMOTE ONLY) Press the

on the remote to move the fan head to the left or right.

Timer

Setting 1 : 1 Hour Setting 2 : 2 Hours Setting 3 : 3 Hours Setting 4 : 4 Hours Setting 5 : 5 Hours

(REMOTE ONLY) Press to switch between timer settings 1-5 hours. LED lights will appear to indicate how many hours the timer is set for.
LEDs will switch off after 20 seconds. To check how long is left on your timer, press and the LED lights will appear.

Runtime without oscillation

MAXIMUM CORDLESS RUNTIME: Up to 20 hours on fan speed 1. MAXIMUM CORDLESS PERFORMANCE: Up to 2 hours on fan speed 5. PLUGGED IN: Indefinite runtime; fan will charge while operating.

Charge Time

FROM 0% TO FULLY 100% BATTERY: 5 hours

Battery Indicator

100% charged: white light 51%-99%: green light 21%-50%: amber light 6%-20%: red light steady 5% and below: red light blinking

TIP: The fan works while charging

5

Shark® FLEXBREEZE Fan Instructions
LIFT-AWAY USE

With one hand on the fan head handle, use the other hand With one hand still on the fan head handle, spread out the

to press the lift away button and LIFT AWAY the fan head 4 support legs using the other hand. Place the fan on a flat,

by pulling upwards.

level surface.

CHARGING THE FAN

PEDESTAL MODE: To charge the fan in pedestal mode, insert the small end of the CHARGER into the charging port on the lower half of the POLE.

Tabletop Mode: To charge the fan, insert the small end of the CHARGER into the charging port under the canter shaft of the fan.

TIP: The fan can be used when in corded and cordless modes.

BATTERY LIFE

SETTINGS Fan Speed 1 Fan Speed 1 + Oscillation Fan Speed 2 Fan Speed 2 + Oscillation Fan Speed 3 Fan Speed 3 + Oscillation

APPROX. RUNTIME 20 hours 10 hours 14 hours 7 hours and 30 minutes 6 hours and 20 minutes 4 hours and 30 minutes

SETTINGS Fan Speed 4 Fan Speed 4 + Oscillation Fan Speed 5 Fan Speed 5 + Oscillation Gentle Breeze Gentle Breeze + Oscillation Strong breeze Strong breeze + Oscillation Runtime subject to 10% variability

APPROX. RUNTIME 3 hours and 30 minutes 2 hours and 30 minutes 2 hours 1 hour and 40 minutes 12 hours and 20 minutes 6 hours and 50 minutes 2 hours and 55 minutes 2 hours and 20 minutes
6

Shark® FLEXBREEZE Fan Instructions

DISASSEMBLY

1

2

3

4

1. Release the fan head by pressing the lift away button and carefully remove the fan from the pole. carefully remove the fan from the pole.

2. Use the Allen Wrench on the underside of the base to rotate the bolt counterclockwise. Remove bolt once loosened.

3. Carefully lift the pole to remove it from the base.

4. Press the small button on the lower pole to detach the poles from one another. Carefully fold as needed for storage. DO NOT strain the cord.

If grille screw, bolt, or hex key have been lost, please see page 13 for hardware specs to see what type of hardware is needed to replace each missing part.

Storage Short term storage indoors (<24 hours) Short term storage outdoors (<24 hours) Long term storage indoors (>24 hours) Long term storage outdoors (>24 hours)

STORAGE
Instructions
Carefully disassemble the fan OR place the assembled fan in the desired storage location. Ensure it is out of reach of children and pets.
Place the assembled fan in the desired storage location. Ensure it is out of reach of children and pets. If there is inclement weather, it is recommended to bring your fan indoors.
Carefully disassemble the fan OR place the assembled fan in the desired storage location. Ensure it is out of reach of children and pets.
Store the fan indoors when not in use for long periods of time. Ensure it is stored out of reach of children and pets.

7

Shark® FLEXBREEZE Fan Instructions
SETTING ADJUSTMENT
· When the fan is unplugged and drawing power from the battery, the remote will enter OFF mode after 24 hours of no use to preserve battery life. When in OFF mode, the remote cannot be used to power on the fan. The fan will have to be powered on using the buttons on the top of the fan head.
· The fan head LEDs will only remain illuminated for 20 seconds after a setting adjustment is made, before turning off to save battery.
· For information on how to activate or deactivate LOCK MODE for fan maintenance, please see the `maintenance’ section of this manual.
· Remote may be less effective when used outside.

POWER ON/OFF

To turn the fan on or off, press the POWER button on REMOTE or USER INTERFACE on the fan head.

SETTINGS

DISPLAY

ON

LED animation will play once (LEDs from will turn on from left to right, then turn off from right to left)

OFF

LEDs will turn off

FAN SPEEDS

Changing the FAN SPEED will increase or decrease the airflow of the fan. There are 5 fan speed settings, plus two more modes called Strong Breeze Mode and Gentle Breeze Mode.
To increase/decrease the fan speed, press the up/down arrow on the REMOTE. To do so on the fan head USER INTERFACE, press the fan icon to cycle through the various fan speeds.

SPEED

DISPLAY

BEST FOR

1

Quietest operation

2

Moderate cooling

3

Balance of noise level and fan power

4

Air circulation

5

Highest power cooling

8

Shark® FLEXBREEZE Fan Instructions

TIMER
If you don’t want to leave your fan constantly on, but don’t want to think about it, use the timer setting (remote only). You can choose between timer settings 1-5 hours. To activate timer, press on your remote. LED lights will appear to indicate how many hours the timer is set for. LEDs will switch off after 20 seconds. To check how long is left on your timer, press and the LED lights will appear.

SPEED

DISPLAY

TIME

1

1 Hours

2

2 Hours

3

3 Hours

4

4 Hours

5

5 Hours

OSCILLATION Choose between 3 oscillation angles to best suit your needs.

To change the oscillation angle, press the up/down arrow on the REMOTE. To do so on the fan head USER INTERFACE, press the oscillation icon to cycle through the various angle options.

To turn off oscillation, press the down arrow or oscillation icon until no LEDs are illuminated.

DISPLAY

ANGLE

BEST FOR

45° Circulating air in a small area, 1-2 people

90°

Circulating air in a moderate area, 3-4 people

180° Circulating air in a large area, 5+ people

HORIZONTAL ANGLE ADJUST
Use this feature to change the horizontal angle of the fan at a distance. This feature is only accessible using the REMOTE.

To adjust the angle of the fan using the remote, press the left/right arrows on the REMOTE.

DISPLAY SETTING

BEST FOR

N/A

–

Adjusting the fan angle toward or away from you at a distance.

9

Shark® FLEXBREEZE Fan Instructions
VERTICAL ADJUSTMENT To adjust the vertical height of your fan head, use the handle to tilt the head up or down. The Shark Fan has a vertical range of 55 degrees.

Fan Head tilted up

Fan Head titled down

HOW TO CARRY YOUR FAN
· If you are carrying your fan for a short distance, it is recommended to carry the fan as a whole and place one hand on the handle and another hand on the pole.
· For longer distances, it is recommended to carry the fan separately, carrying the fan head in LiftAway mode.

10

General Use

Shark® FLEXBREEZE Fan Instructions

TROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS

Why is the remote not working?

Ensure the remote is pointed directly at the front UI/ LEDs and try again. The remote will enter IDLE MODE after it has not been used for 24 hours. When in IDLE MODE, the remote cannot be used to power on the fan. The fan will have to be powered on using the fan head user interface. To turn off IDLE MODE, select any button on the fan unit.
If the remote does not work after IDLE MODE has been deactivated, replace the remote battery.

Why are my remote AND UI buttons not working?

Ensure that LOCK MODE is not on. LOCK MODE is a feature to completely deactivate your fan to allow you to safely perform unit maintenance. To deactivate LOCK MODE, hold down the oscillation button on the unit UI for 3 seconds.

Can I leave the fan outdoors?
Why is the fan rattling?
The second LED and the battery LED (in amber) are flashing on and off ­ what is wrong?
Why do I have to activate lock mode before maintenance?

This fan is water resistant and will not be damaged by light rain. However, it is not able to withstand heavy rain or water submersion. It is recommended to bring the fan indoors when not in use. Your fan is IPX4 rain resistant (excluding the remote).
Ensure that the fan blade cap is fully installed before operating the fan. Please see the `maintenance’ section of this manual for more details.
This error state indicates an issue with the voltage of the charger. Please be sure to only use the provided Shark charging cable and power supply.
Since the Shark® FlexBreeze Fan can be used cordlessly, there is a risk of the fan turning on when it is not plugged in. To avoid accidental use while providing maintenance, LOCK MODE will prevent the fan from powering on while maintenance is being performed and the blades are exposed.

How often should I clean the fan?

It is recommended to maintain the fan every 6 months or as needed.

How often should I clean the misting accessory?

It is recommended to clean the misting accessory every 12 months or as needed. Please note: the hardness of your water source will impact the frequency at which the misting accessory will need to be maintained.

Why is my mister not working

To work properly, the mister must have regular maintenance

effectively/ not producing mist? performed. See page 16 for more information.

Maintenance

Accessories

11

Shark® FLEXBREEZE Fan Instructions

MAINTENANCE

It is recommended to maintain the fan every 6 months or as needed. If grille screw, bolt or hex key have been lost, please see page 13 for hardware specifications to see what type of hardware is needed to replace each missing part.
· LOCK MODE must be activated prior to performing maintenance.
· This will temporarily block all fan functions until deactivated. Activating lock mode prevents any risk of the fan turning on by mistake during maintenance when the fan blades are exposed.

1

2

3

4

Lights will blink three times when lock mode has been activated
Turn on lock mode before performing maintenance for safety. To activate, hold down the OSCILLATION icon on the fan head user interface for 3 sec.

Use the Phillip’s screw head end on your Hex Key to loosen the screw at the bottom of the FAN GRILLE.

Rotate the FAN GRILLE counter-clockwise to remove from the fan head. Set grille aside.

5

6

7

With one hand securing the fan blades, use the other hand to rotate the FAN BLADE CAP clockwise to remove from the shaft. Set aside.
8

Gently pull to remove the FAN BLADES. Set aside.
9

Carefully replace the FAN BLADE onto the center shaft.

With one hand securing the fan blades, use the other hand to rotate the FAN BLADE CAP counterclockwise to fasten to the shaft.

Rotate the FAN GRILLE clockwise to fasten to the fan head.

10

Hold for 3 seconds

Lights will blink three times when lock mode has been activated

Place the fan upright on a flat, level surface. Use the Phillip’s screw head end of your Hex Key to replace and tighten the screw at the bottom of the FAN GRILLE.

To deactivate lock mode to resume normal fan use, hold down the OSCILLATION icon on the fan head user interface for 3 sec.

12

Shark® FLEXBREEZE Fan Instructions
HARDWARE SPECS

Grille Screw For securing the grille to the fan

Drive Type

Phillips

6mm

2.52mm

Thread Size / Pitch

M3 x 0.5mm

No.1

Length

16mm

16mm M3x0.5mm

Screwdriver For driving the screw

Drive Type

Phillips

Size

No. 1

Bolt For securing base to the pole

Drive Type

Hex

Thread Size / Pitch

M6 x 1mm

Length

85mm

10mm

6mm

5mm

85mm

24mm

M6x1mm

Hex Key For driving the bolt

Drive Type

Hex

Size

5mm

13

Shark® FLEXBREEZE Fan Instructions
AVAILABLE ACCESSORIES

Remote Control Use the remote control to operate your fan from a distance.

Mister
Connect the misting accessory to the front grille to product a fine mist. For more instructions on how to use, please see the `misting accessory instructions.’

Fan Cover
Protect your fan from damage and dust. For more instructions on how to use, please see the `fan cover accessory instructions.’

Car Charger Charge your fan on the go with the car charger accessory. For more instructions on how to use, please see the `car charger accessory instructions.’

14

Shark® FLEXBREEZE Fan Instructions
FAN COVER

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
The fan cover is not a toy. Children should not play with it as it may become unsanitary during outdoor use.
CHOKING HAZARD: Children should not play with the cover as they could choke on the draw string.
INSTRUCTIONS FOR USE:
1. Position the cover over fan head, then slide it on until the fan is completely covered.
2. Cinch the drawstring on the bottom of the cover to secure it in place.
3. The cover will protect the fan from dust and damage from light. The fan cover does not guarantee that the product can be left outdoors for an extended time.

CAR CHARGER

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
1. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for battery charger model FA220CAR from Dongguan City Gangqi Electronics Co., Ltd.
2. Before using this battery charger, read all instructions and cautionary markings on the battery charger, battery, and product using battery.
3. CAUTION: To reduce risk of injury, charge only the provided rechargeable battery. Other types of batteries may burst, causing injury to persons and damage.
4. DO NOT expose charger to rain, moisture, or snow.
5. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
6. To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter connector rather than cord when disconnecting charger.
7. To reduce risk of electric shock, unplug charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
8. DO NOT operate charger with damaged cord or cigarette lighter connector. Replace it immediately.
9. The car charger may be wiped clean with a damp cloth once removed from the power socket. Allow car charger to fully dry prior to use.

INSTRUCTIONS FOR USE:
1. Firmly insert the larger end of the car charger into a 12-volt outlet in your vehicle.
2. Connect the small end of the car charger to the charging port on the underside of the fan head, between the 4 support legs.
3. If the fan is charging in a moving vehicle, be sure to position the fan in a secure location.

15

Shark® FLEXBREEZE Fan Instructions
MISTING ACCESSORY
INSTRUCTIONS FOR USE:
1. Carefully align the misting accessory with the circle in the center of the fan grill, and push it in to install. Do not use excessive force.
2. Screw the end of the misting accessory into the nozzle of a standard garden hose.
3. Turn on the hose to create mist. 4. To adjust the amount of mist, increase
or decrease the fan speed, or adjust the water pressure from the hose. Higher water pressure or fan speed will mean more mist. 5. The valve is open when the mister accessory is taken out of the packaging. Rotate the valve clockwise to stop the flow of water, as shown in the diagram.

If your mister becomes less effective or stops working, follow the steps listed in “INSTRUCTIONS FOR MAINTENANCE”. Do NOT twist nozzles unless they are being removed for cleaning

INSTRUCTIONS FOR MAINTENANCE:
FOR BEST RESULTS, CLEAN THE MISTING ACCESSORY ONCE A YEAR, OR AS NEEDED. USING HARDER WATER WILL REQUIRE MORE FREQUENT CLEANING.
1. Unscrew the misting accessory from the water source, then pull the other end off the fan grill.
2. Place the accessory on a flat surface and carefully remove each brass nozzie, one at a time. CAUTION: Residual pressure may remain in the misting accessory.
3. To remove a nozzle, twist it counterclockwise. Do not use a wrench or any other tool. WARNING: CHOKING HAZARD.Keep nozzles out of the reach of children.
4. To flush the misting system, once the nozzles are all removed, connect the accessory to a garden hose or other outdoor water source. Aim the accessory away from yourself or anyone else, then turn on the water and run it through the system for 30 seconds to flush out any debris.
5. Soak the nozzles in a solution of undiluted distilled white vinegar (5% acetic acid by volume) to loosen debris that may be clogging or restricting the nozzle. DO NOT soak the nozzles for more than 2 hours.
6. After soaking the nozzles in the solution, rinse them thoroughly with water.
7. Carefully reinstall each nozzle by twisting clockwise until you feel resistance.

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
1. The misting accessory is suitable for OUTDOOR USE ONLY.
2. The misting accessory will continue to operate when the fan is powered off. Turn off the water source to turn off the accessory.
3. DO NOT operate the misting accessory using water pressure above typical household pressure, 4.1 bar.
4. DO NOT use warm or hot water. Only use cold or room temperature water.
5. DO NOT handle live electrical products while in range of the misting stream.
6. Keep non-waterproof electronic equipment and appliances out of the misting stream.
7. Children should be supervised to ensure that they DO NOT play with the misting accessory.
8. WARNING: CHOKING HAZARD. Always keep nozzles and any other small parts out of the reach of children.
9. Cleaning and user maintenance of the misting accessory shall not be done by children without supervision.
READ AND SAVE THESE INSTRUCTIONS

If your mister becomes less effective or stops working even after following maintenance instructions, go to sharkclean.com to order replacement nozzles

16

Shark® FLEXBREEZE Fan Instructions

MANUFACTURER’S GUARANTEE

When a consumer buys a product in the country of purchase, they get the benefit of legal rights relating to the quality of the product (your “legal rights”). You can enforce your legal rights against your retailer, including Shark if you bought your Shark appliance from sharkclean.co.uk. However, at Shark we are so confident about the quality of our products that we give the owner an additional, free parts and labour manufacturer’s guarantee of up to 2 years. A household appliance like a Shark Fan appliance constitutes a sizeable investment. Your new machine needs to work properly for as long as possible. The guarantee it comes with is an important consideration – and reflects how much confidence the manufacturer has in its product and manufacturing quality. The manufacturer’s guarantee does not affect your legal rights.
How long are new Shark machines guaranteed for? Our manufacturer’s guarantee lasts for one year from the date of purchase as standard, or for two years if you register your purchase with us within 28 days. There is information on how to register below.
How do I register my Shark guarantee? If you have purchased your Shark Fan appliance directly from sharkclean. co.uk your guarantee is registered automatically. If you bought it from anywhere else, you can register your guarantee online within 28 days of purchase. · To register online, please visit www.sharkclean.co.uk/register-guarantee or scan the QR code in your instruction manual. · Keep a note of the date you purchased the machine.
IMPORTANT: · Keep your receipt if you bought your Shark Fan appliance from anywhere except sharkclean.co.uk. You will need it to claim under
your guarantee. · The free Shark guarantee only applies to Shark owners living permanently in the UK.
What are the benefits of registering my free Shark guarantee? When you register your guarantee, you will get an extra year of cover. We’ll also have your details to hand if we ever need to get in touch. If you further agree to receive communications from us, you can also receive tips and advice on how to get the best out of your Shark Fan appliance and hear the latest news about new Shark technology and launches. What is covered by the free Shark guarantee? Repair or replacement (at Shark’s option) of your Shark machine, including all parts and labour.
What is not covered by the free Shark guarantee? · Normal wear and tear. · Accidental damage or faults caused by negligent use or care, misuse, neglect, careless operation or handling of the Shark appliance
which is not in accordance with the Shark Operating Manual supplied with your machine. · Damage caused by use of the Shark appliance for anything other than normal domestic household purposes. · Damage caused by use of parts not assembled or installed in accordance with the operating instructions. · Damage caused by use of parts and accessories which are not Shark Genuine Components · Faulty installation (except where installed by Shark). · Repairs or alterations carried out by parties other than Shark or its agents.
How can I claim under the free Shark guarantee? Contact our customer service helpline on 0800 862 0453. For service hours please visit our website under `Contact Us’. It’s free to call, and you’ll be put straight through to a Shark representative. You’ll also find online support at https://support.sharkclean.co.uk/.
The Shark representative will go through some troubleshooting with you, and if we conclude that the item has failed, we will send you a replacement part or a returns label to send the defective item back to us free of charge. When you have delivered the defective product to us, we will send you a replacement. Please remember that the item will need to be boxed when you return it to us, which can be any suitable box; it does not have to be the original packaging. Where can I buy genuine Shark spares and accessories? Shark spares and accessories are developed by the same engineers who developed your Shark Fan appliance. You’ll find a full range of Shark spares, replacement parts and accessories for all Shark machines at www.sharkclean.co.uk. Please remember that damage caused by the use of non-Shark spares may not be covered under your guarantee.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Instruction Guide is designed to help you get a complete understanding of your new Shark® Fan.

SharkNinja Europe Ltd, 1st/2nd Floor Building 3150, Thorpe Park, Century Way, Leeds, England, LS15 8ZB UK +44 (0)800 862 0453 www.sharkclean.co.uk

SharkNinja Germany GmbH, Rotfeder-Ring 9, 60327 Frankfurt am Main, Germany www.sharkclean.eu

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.
© 2024 SharkNinja Operating LLC. SHARK is a registered trademark in the United Kingdom of SharkNinja Operating LLC.
PHILLIPS is a registered trademark of Phillips Screw Company.

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmentally safe recycling.

FA220UK_IB_MP_240208_Mv2

@sharkhomeUK 17

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>