KODAK PWS-2240 Portable Wireless Speaker User Manual

KODAK PWS-2240 Portable Wireless Speaker

Product Overview

1. POWER ON/OFF: Press and hold the power button to power the speaker, the blue LED light will flash rapidly. Press and hold On/Off button again to power off the speaker.
2. VOL-/ PREVIOUS: While music is playing, short press to reduce volume. Long press to move to the previous track on your playlist.
3. VOL+/NEXT: Press the button to increase the volume. Press and hold for 1 second to skip to the next track on your playlist.
4. Fabric hook
5. Type-C charging port: Use the supplied Type-C charging cable to charge your speaker.

Charging Your Speaker

1. Connect one end of the charging cable to the charging port on your speaker.
2. Plug the other end of the USB-C charging cable into a suitable USB port on your computer, notebook, or power source to recharge the built-in rechargeable battery of your speaker.
3. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off when your unit is fully charged.

Bluetooth Pairing

1. Make sure your Bluetooth audio source is within three meters of range of your speaker.
2. Press and hold the ON/OFF button on your speaker to power on, blue LED light will start blinking to indicate the speaker is in pairing mode.
3. Turn on Bluetooth mode on your audio source and select KODAK SPEAKER.
4. Once paired, the blue LED light stops flashing and you can use your speaker to listen to the audio from your audio source.

TWS Mode

1. Make sure both KODAK speakers are without any Bluetooth connection.
2. Power on both speakers.
3. Press the PLAY/PAUSE button on any one of the speakers, and the two speakers will connect automatically with an indicated tone.
4. Under connection, search Bluetooth device and select KODAK SPEAKER when the device and the units are connected, the blue LED on both units will turn solid.
5. Long press the PLAY/PAUSE button to disconnect the TWS connection from the units.

FAQ

• Q : How do I know when my speaker is fully charged?
• A: When charging, a red LED light will illuminate. The red light will turn off when your unit is fully charged.
• Q: Can I use this speaker with my laptop?
• A: Yes, you can use this speaker with laptops, tablets, and many types of smartphones to stream music and enjoy hands-free calling.
• Q : How do I disconnect the TWS connection between speakers?
• A: Long press the PLAY/PAUSE button on any one of the speakers to disconnect the TWS connection between them.

INTRODUCTION

Thank you for choosing this product as your source for entertainment! You can use this item with tablets, laptops, and many types of smartphones to stream music and enjoy hands-free calling. In order to get the best results please read this manual before using the product.

WHAT’S INSIDE

CHARGING YOUR SPEAKER

1. Connect one end of the charging cable to the charging port on your speaker then plug the other end of the USB-C charging cable into a suitable USB port on your computer, notebook or power source to recharge built in rechargeable battery of your speaker.
2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off when your unit is fully charged.

PRODUCT OVERVIEW

1. POWER ON/OFF
   Press and hold the power button to power On the speaker, the blue LED light will flash rapidly. Press and hold On/Off button again to power off the speaker.

2. VOL-/ PREVIOUS
   While music is playing, short press to reduce volume. Long press to move to the previous track on your playlist.

3. PLAY/PAUSE/PHONE/TWS

   • Press the Play button for 1 second to pause while playing music, and press again to resume play.
   • Upon hearing the incoming ringtone, press the play button once to answer the call. Music will be paused automatically. Press the button again to end the call, music will resume.
   • Making a call: Press and hold the button twice to redial the last dialed number on your mobile. This feature may vary based on your mobile device.
   • Rejecting a call: Upon hearing the incoming call tone, press the PLAY/PAUSE button for 1 second to reject the call.
   • Power on two speakers and press the PLAY/PAUSE button on either of the speakers to make a TWS connection.

4. VOL+/NEXT
   Press the button to increase the volume. Press and hold for 1 second to skip to the next track on your playlist.

5. Fabric hook

6. Type-C charging port : Use the supplied Type-C charging cable to charge your speaker.

BLUETOOTH PAIRING

In order to pair your Bluetooth audio device to your speaker for the first time, follow the steps below:

1. Make sure your Bluetooth audio source is within three meters of range of your speaker.
2. Press and hold the ON/OFF button on your speaker to power it on, blue LED light will start blinking to indicate the speaker is in pairing mode.
3. Turn on Bluetooth mode on your audio source and select “KODAK SPEAKER.”
4. Once paired, the blue LED light stops flashing and you can use your speaker to listen to the audio from your audio source.

TWS MODE

1. Make sure both KODAK speakers are without any Bluetooth connection;
2. Power on both speakers;
3. Press the “PLAY/PAUSE” button on any one of the speakers, and the two speakers will connect automatically with the indicated tone. The Master speaker LED blinks quickly and the other one goes solid. This means the multiple point connected successfully.
4. Under connection, search Bluetooth device and select “KODAK SPEAKER” when the device and the units are connected, the blue LED on both units will turn solid.
5. Long press the “PLAY/PAUSE button” to disconnect the TWS connection from the units.

SPECIFICATION

• Wireless Version: 5.0
• Supports: A2DP and AVRCP
• Power rating: 4Ω 5Watts
• Freq. response: 2.402~2.408GHz
• S/N ratio: > 70dB
• Wireless transmission distance: up to 10m (32ft.)
• Dimension: L97.8W47.4H81.5mm
• Power input: DC 5V, 650mA
• Battery capacity: 3.7V/1200mAh
• Charging time: Approx. 2 hours

CONTACT

• www.starglory.com.hk/kodak
• © 2024 Made in China for Star Glory Ltd
• Room 905-907, 9/F., Cheung Sha Wan Plaza, Tower 1,
• 833 Cheung Sha Wan Road, Lai Chi Kok, Kowloon, Hong Kong.
• The Kodak trademark, logo, and trade dress are used under license from Kodak. All information contained in this document is subject to change without notice.
• CUSTOMER SERVICE: sales@starglory.com.hk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>