JBC MS20 Suction Filter Instruction Manual
- July 30, 2024
- JBC
Table of Contents
JBC MS20 Suction Filter
Specifications
- Product: MS20 Suction Filter for MS, MSE, MV, MVE
- Reference: MS20
- Net Weight: 34.10 g / 0.08 lb
- Package Dimensions/Weight: 134 x 62 x 48 mm / 55.87 g (L x W x H)
- Compliance: Complies with CE standards. ESD safe.
Product Usage Instructions
Installation
- Ensure the suction filter is clean and free from any damage.
- Insert the suction filter into the designated slot of your MS, MSE, MV, or MVE device.
- Make sure the filter is securely in place to prevent any leaks during operation.
Maintenance
- Regularly check the filter for cleanliness and replace it when necessary to maintain optimal suction performance.
- Use only original JBC spare parts to replace any defective or damaged pieces.
- Repairs should be carried out only by a JBC authorized technical service.
- Do not attempt maintenance procedures without proper supervision, especially if children are involved.
Warranty Information
JBC offers a 2-year warranty for this product covering manufacturing
defects. The warranty includes replacement of defective parts and labor. It
does not cover product wear or misuse. To validate the warranty, return the
equipment, postage paid, to the dealer of purchase.
Disposal
Do not dispose of this product in regular garbage. Follow European
directive 2012/19/EU and return electronic equipment at the end of its life to
an authorized recycling facility.
FAQ
-
Q: Can I use any replacement filter with the MS20 suction filter?
A: It is recommended to use only original JBC spare parts to ensure proper functionality and performance. -
Q: How often should I replace the suction filter?
A: Replace the filter whenever you notice a decrease in suction power or if it becomes visibly dirty or clogged.
This manual corresponds to the following reference: MS20
Packing List
The following items are included:
Suction Filter ………………………………………………………………………… 1 unit
Manual ………………………………………………………………………………….. 1 unit
Ref. 0028023
Features
Important:
Do not use sharp pointed objects to open the suction filter.
Maintenance
- Keep filters clean to ensure proper solder suction and replace them when necessary.
- Replace any defective or damaged piece. Use original JBC spare parts only
- Repairs should only be performed by a JBC authorized technical service.
- Maintenance must not be carried out by children unless supervised.
Specifications
MS20
Suction Filter for MS, MSE, MV, MVE
Ref.: MS20
- Net Weight: 34.10 g / 0.08 lb
- Package Dimensions/Weight (L x W x H) : 134 x 62 x 48 mm / 55.87 g
5.28 x 2.44 x 1.89 / 0.12 lb
Complies with CE standards. ESD safe.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>