YAMAHA Speaker System Owner’s Manual

: June 7, 2024
: Yamaha

Speaker System
VXS10S/VXS10SW/VXS10ST/VXS10STW VED2080
Owner’s Manual English

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Do not open

This device contains no user-serviceable parts. Do not open the device or attempt to disassemble the internal parts or modify them in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel.

Water warning

Do not expose the device to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the device, have the device inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:

Location

Do not place the device in an unstable position where it might accidentally fall over.
Do not place the device in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction.
Construction work should be carried out in accordance with construction-related law and always by a professional constructor. If the device installation requires construction work, make sure to observe the following precautions.
– Choose mounting hardware and an installation location that can support the weight of the device.
– Avoid locations that are exposed to constant vibration.
– Use the required tools to install the device.
– Inspect the device periodically.
When transporting or moving the device, always use two or more people.
Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself.

Connections

Before connecting the device to a power amplifier, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.
Use only speaker cables for connecting speakers to the speaker connectors. Use of other types of cables may result in fire.

Maintenance

Do not wipe the outer packaging with benzine, thinner, or synthetic detergent and do not use electrical contact cleaner. These may damage the outer packaging and dissolve the parts.

Handling caution

Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into holes of the grille. If this happens, have the device inspected by qualified Yamaha service personnel.
Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire.
When choosing a power amplifier for use with this device, make sure that the output power of the amplifier is lower than the power capacity of this device (see SPECIFICATIONS).
Even if the output power of the amplifier is lower than the power capacity of this device (PGM), use of excessive input signals resulting in clipping may cause damage to the device.
Malfunction or fire may occur especially when the following sounds or noises are generated:
– feedback, when using a microphone
– continuous and extreme volume sound from a musical instrument
– extreme continuous distorted sound
– noise caused by plugging/unplugging the cable while the amplifier is turned on

NOTICE

To avoid the possibility of malfunction/damage to the product or damage to other property, follow the notices below.

● Handling and Maintenance

Do not place vinyl, plastic or rubber objects on the device, since this might discolor the cabinet.
When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Condensation can occur in the device due to rapid, drastic changes in ambient temperature-when the device is moved from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours until the condensation has completely dried out.
Be sure to observe the amplifier’s rated load impedance (see SPECIFICATIONS), particularly when connecting speakers in parallel. Connecting an impedance load outside the amplifier’s rated range can damage the amplifier.
When connecting the speakers with high impedance, be sure that the output total of each speaker does not exceed the rated output of the power amplifier.
ABOUT THE PROTECTION CIRCUIT
This speaker system has an internal protection circuit that shuts off the speaker unit when an excessive input signal is applied.
If the speaker unit emits no sound, reduce the volume level of the amplifier immediately.
The sound will return automatically in several seconds.
Place the speaker on a flat and smooth surface.

● About This Manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your device.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the device.

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

UNPACKING

Unpack the contents and confirm that all the following items are included.

Speaker × 1
Bracket base × 1
Mounting bracket × 1
Captive washer screw × 4
Rubber spacer × 4 (14 mm thickness)
Hexagon bolt × 4
Spring washer × 4
Flat washer × 4
Safety wire × 1
Owner’s Manual (this manual)
Screws/bolts to fasten the bracket onto the wall and speaker cables are not included.

SPECIFICATIONS

| VXS10S/VXS10SW| VXS10ST/VXS10STW
---|---|---
Type|

Subwoofer, Bass reflex

Component| 10″ (25 cm) Cone driver, Dual voice coil
Nominal impedance|

8 Ω + 8 Ω

|

–

Power rating| NOISE|

100 W + 100 W

|

–

PGM|

200 W + 200 W

|

–

MAX|

400 W + 400 W

|

–

Sensitivity (1W, 1m) *1|

96 dB SPL

|

96 dB SPL

Maximum SPL (Calculated, 1m) *2|

125 dB SPL

|

–

Frequency range (-10 dB) *1|

45 Hz – 250 Hz

|

45 Hz – 250 Hz

Subwoofer filter| Network: Low-pass filter 6 dB/Oct, 200 Hz
Acoustic filter: Low-pass filter 6 dB/Oct, 200 Hz
Satellite filter| Network: High-pass filter 6 dB/Oct, 200 Hz
Satellite impedance| 8 Ω load per satellite output recommended *3
Connector| Euroblock (4 pin) × 1:

Input (CH1: +/-, CH2: +/-)

| Euroblock (4 pin) × 1:

Input (input: +/-, loop-thru: +/-)

1: Half-space (2π)
2: Calculated based on power rating and sensitivity, exclusive of power compression.
*3: Impedance lower limit (per satellite output) VXS10S/VXS10SW: 4 Ω, VXS10ST/VXS10STW: 8 Ω

The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvements to the product, this manual may not apply to the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

The dimensions are shown overleaf.

INSTALLING THE SPEAKER

When installing the speaker on the floor, attach the rubber spacers to the underside of the speaker to provide support. Affix the rubber spacers firmly when you attach them.
When installing the speaker on a wall or ceiling, use the included brackets or optional U-bracket UB-DXR8. Ensure that the wall/ceiling is sufficiently strong.
This package does not include the mounting hardware to install the included brackets/safety wire or the UB-DXR8. If you are not sure what materials are required for installation, consult a specialist.

An installed speaker is shown below. Install the bracket as shown.

Wall installation Ceiling installation
(using included brackets) (using optional bracket UB-DXR8)

Wall installation Ceiling installation

WARNING

Do not use the included brackets for ceiling installation.
Do not use the UB-DXR8 for wall installation.

Pre-installation (Preparation of the cable)
Use stranded wire for cables attached to the Euroblock connector. Strip their insulation as shown in the figure and connect them.

About 7 mm (0.3 in.)

Preparation of the cable 2

NOTE
Do not plate stranded wires by solder. Doing so will cause the wire to break.

1 CONNECT THE WIRING TO THE CONNECTOR

Connect the cable from the amplifier to the “INPUT” socket, and the cable being connected to other speakers to the “SATELLITE SPEAKERS” socket.
A signal input to CH1 of INPUT is output from ST1 of SATELLITE SPEAKERS, and signal input to CH2 of INPUT is output from ST2 of SATELLITE SPEAKERS.

For VXS10ST/VXS10STW, connect the included 5-pin Euroblock connector as shown below and set the appropriate wattage when using 100 V/70 V line.

100V/x 100V/200W 100V/100W 100V/50W
70V/200W 70V/100W 70V/50W 70V/25W

CONNECT THE WIRING TO THE CONNECTOR 1

NOTE
No setting should be made for 100 V line, as shown in the far left illustration.

1 Remove the Euroblock connector from the speaker.

Remove the Euroblock connector from the speaker

2 After loosening the terminal screws of the Euroblock connector with a flat-blade screwdriver, insert the cable into each terminal and tighten the screws. Make sure that cables cannot be pulled out.

Euroblock connector

NOTE
Use a flat-blade screwdriver with a blade less than 3 mm (0.1 in.).

Use a flat-blade screwdriver 2

Less than 3 mm (0.1 in.)

3 (VXS10ST/VXS10STW only) Plug the 5-pin Euroblock connector into the TRANSFORMER SETTINGS socket.

2 INSTALL THE SPEAKER

Installing on the wall (using the included brackets)

INSTALL THE SPEAKER ON THE WALL 1 1 Place the bracket base on the wall and mark the position for screws/bolts. The diameter of seven holes for screw/bolt (not included) is ø6.5 mm.
2 Make holes in the wall for the bolts, as required, and feed the bolts through the holes.
3 Affix the bracket base on the wall. The narrow edge of the bracket base should be oriented downward.
4 Attach the mounting bracket to the speaker with the included screws with captive washer.
The narrow edge of the mounting bracket should be oriented downward.

INSTALL THE SPEAKER ON THE WALL 2

5 Attach the two rubber spacers to the bottom edge of the speaker. Make sure the spacers are located near the outer edge; otherwise, they will impede installation on the bracket base in the next step. Affix the rubber spacers firmly when you attach them.
6 Slide the speaker down onto the bracket base until it locks in place.
CAUTION
Be sure to perform this work with two or more people.

INSTALL THE SPEAKER ON THE WALL 3

To detach the mounting bracket from the bracket base, release the lock of the mounting bracket with a long flat-blade driver and lift the speaker.
CAUTION
Be sure to perform this work with two or more people.

INSTALL THE SPEAKER ON THE WALL 4

7 Plug the Euroblock connectors into the SATELLITE SPEAKERS and INPUT sockets.

INSTALL THE SPEAKER ON THE WALL 5

Installing on the ceiling (using the optional UB-DXR8)

To determine the appropriate size of the UB-DXR8, download the “U BRACKET OWNER’S MANUAL” from the following manual library site. https://download.yamaha.com/

1 Assemble two L-shaped brackets into a U-shape using the M5 × 10 screws included with the UB-DXR8 as shown below. Peel off the sheet from each rubber spacer (14 mm thickness; included with the speaker), and attach the spacers to the inside of each bracket arm aligning the holes so that the hexagon bolts can be inserted. Affix the rubber spacers firmly when you attach them.

INSTALL THE SPEAKER ON THE CEILING 1

2 Make sure that the width of the U bracket matches the speaker width.
3 Affix the U bracket on the ceiling using appropriate mounting hardware.
4 Use the hexagon bolts, spring washers and flat washers included with the speaker to attach the speaker to the UB-DXR8.
CAUTION
Be sure to perform this work with two or more people.

INSTALL THE SPEAKER ON THE CEILING 2

5 Plug the Euroblock connectors into the SATELLITE SPEAKERS and INPUT sockets.

INSTALL THE SPEAKER ON THE CEILING 3

3 ATTACH THE SAFETY WIRE

This section explains how to attach the included safety wire.

CAUTION

Make sure to take measures to prevent the speaker from falling down in the event of a installation failure.
When installing the safety wire to the wall, install it higher than the wire’s attachment point on the speaker, with as little slack as possible.
If the safety wire is too short, prepare another wire appropriate for the speaker weight and installation conditions. If the wire is too long, should the speaker fall, the wire may snap as a result of too much strain.

1 Pass the safety wire through the eyebolt on the rear of the speaker.

ATTACH THE SAFETY WIRE 1

2 Pass the bracket of the safety wire through the loop on the other end, and pull tight up against the eyebolt.

ATTACH THE SAFETY WIRE 2

3 Affix the bracket of the safety wire to the wall.

ATTACH THE SAFETY WIRE 3

Important Notice: Guarantee Information for customers in European Economic Area (EEA) and Switzerland

*Important Notice: Guarantee Information for customers in EEA and Switzerland*
For detailed guarantee information about this Yamaha product, and Pan-EEA and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country. * EEA: European Economic Area

http://europe.yamaha.com/warranty/

URL_4

ADDRESS LIST

NORTH AMERICA

CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Toronto, Ontario,
M1S 3R1, Canada
Tel: +1-416-298-1311

U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, CA 90620,
U.S.A.
Tel: +1-714-522-9011

CENTRAL & SOUTH AMERICA

MEXICO
Yamaha de Mexico, S.A. de C.V.
Av. Insurgentes Sur 1647 Piso 9, Col. San Jose
Insurgentes, Delegacion Benito Juarez, Mexico,
D.F., C.P. 03900, Mexico
Tel: +52-55-5804-0600

BRAZIL
Yamaha Musical do Brasil Ltda.
Praca Professor Jose Lannes, 40, Cjs 21 e 22, Brooklin
Paulista Novo CEP 04571-100 — Sao Paulo — SP,
Brazil
Tel: +55-11-3704-1377

ARGENTINA
Yamaha Music Latin America, S.A.,
Sucursal Argentina
Olga Cossettini 1553, Piso 4 Norte,
Madero Este-C1107CEK,
Buenos Aires, Argentina
Tel: +54-11-4119-7000

PANAMA AND OTHER LATIN
AMERICAN/CARIBBEAN REGIONS
Yamaha Music Latin America, S.A.
Edif. Torre Banco General, Piso 7, Urbanizacion
Marbella, Calle 47 y Aquilino de la Guardia,
Ciudad de Panama, Republica de Panama
Tel: +507-269-5311

EUROPE

THE UNITED KINGDOM/IRELAND
Yamaha Music Europe GmbH (UK)
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, U.K.
Tel: +44-1908-366700

GERMANY
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0

SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH, Branch
Switzerland in Thalwil
Seestrasse 18a, 8800 Thalwil, Switzerland
Tel: +41-44-3878080

AUSTRIA/BULGARIA/
CZECH REPUBLIC/HUNGARY/
ROMANIA/SLOVAKIA/SLOVENIA
Yamaha Music Europe GmbH
Branch Austria
Schleiergasse 20, 1100 Wien, Austria
Tel: +43-1-60203900

POLAND
Yamaha Music Europe GmbH
Sp.z o.o. Oddzial w Polsce
ul. Wielicka 52, 02-657 Warszawa, Poland
Tel: +48-22-880-08-88

MALTA
Olimpus Music Ltd.
Valletta Road, Mosta MST9010, Malta
Tel: +356-2133-2093

NETHERLANDS/BELGIUM/
LUXEMBOURG
Yamaha Music Europe Branch Benelu x
Clarissenhof 5b, 4133 AB Vianen, The Netherlands
Tel: +31-347-358040

FRANCE
Yamaha Music Europe
7 rue Ambroise Croizat, Zone d’activites de Pariest,
77183 Croissy-Beaubourg, France
Tel: +33-1-6461-4000

ITALY
Yamaha Music Europe GmbH, Branch Italy
Via Tinelli N.67/69 20855 Gerno di Lesmo (MB),
Italy
Tel: +39-039-9065-1

SPAIN/PORTUGAL
Yamaha Music Europe GmbH Iberica, Sucursal
en Espana
Ctra. de la Corufia km. 17,200, 28231
Las Rozas de Madrid, Spain
Tel: +34-91-639-88-88

GREECE
Philippos Nakas S.A. The Music House
19th klm. Leof. Lavriou 190 02 Peania — Attiki,
Greece
Tel: +30-210-6686168

SWEDEN/FINLAND/ICELAND
Yamaha Music Europe GmbH Germany filial
Scandinavia
JA Wettergrensgata 1, 400 43 Goteborg, Sweden
Tel: +46-31-89-34-00

DENMARK
Yamaha Music Denmark,
Fillial of Yamaha Music Europe GmbH, Tyskland
Generatorvej 8C, ST. TH. , 2860 Soborg, Denmark
Tel: +45-44-92-49-00

NORWAY
Yamaha Music Europe GmbH Germany –
Norwegian Branch
Grini Naeringspark 1, 1332 Osteras, Norway
Tel: +47-6716-7800

CYPRUS
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0

RUSSIA
Yamaha Music (Russia) LLC.
Room 37, entrance 7, bld. 7, Kievskaya street,
Moscow, 121059, Russia
Tel: +7-495-626-5005

OTHER EUROPEAN REGIONS
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030

AFRICA

Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500

MIDDLE EAST

TURKEY
Yamaha Music Europe GmbH
Merkezi Almanya Turkiye Istanbul Subesi
Mor Sumbul Sokak Varyap Meridian Business
1.Blok No:1 113-114-115
Bati Atasehir Istanbul, Turkey
Tel: +90-216-275-7960

OTHER REGIONS
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500

ASIA

THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: +86-400-051-7700

INDIA
Yamaha Music India Private Limited
P-401, JMD Megapolis, Sector-48, Sohna Road,
Gurugram-122018, Haryana, India
Tel: +91-124-485-3300

INDONESIA
PT. Yamaha Musik Indonesia (Distributor)
Yamaha Music Center Bldg. Jalan Jend. Gatot
Subroto Kay. 4, Jakarta 12930, Indonesia
Tel: +62-21-520-2577

KOREA
Yamaha Music Korea Ltd.
11F, Prudential Tower, 298, Gangnam-daero,
Gangnam-gu, Seoul, 06253, Korea
Tel: +82-2-3467-3300

MALAYSIA
Yamaha Music (Malaysia) Sdn. Bhd.
No.8, Jalan Perbandaran, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia
Tel: +60-3-78030900

SINGAPORE
Yamaha Music (Asia) Private Limited
Block 202 Hougang Street 21, #02-00,
Singapore 530202, Singapore
Tel: +65-6740-9200

TAIWAN
Yamaha Music & Electronics Taiwan Co.,Ltd.
2F., No.1, Yuandong Rd., Banqiao Dist.,
New Taipei City 22063, Taiwan (R.O.C.)
Tel: +886-2-7741-8888

THAILAND
Siam Music Yamaha Co., Ltd.
3, 4, 15, 16th Fl., Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: +66-2215-2622

VIETNAM
Yamaha Music Vietnam Company Limited
15th Floor, Nam A Bank Tower, 201-203 Cach
Mang Thang Tam St., Ward 4, Dist.3,
Ho Chi Minh City, Vietnam
Tel: +84-8-3818-1122

OTHER ASIAN REGIONS
http://asia.yamaha.com/

OCEANIA

AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 80 Market Street, South Melbourne,
VIC 3205, Australia
Tel: +61-3-9693-5111

REGIONS AND TRUST TERRITORIES
IN PACIFIC OCEAN
http://asia.yamaha.com/

PA54

Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan
(For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany