tp-link S200B Tapo Smart Button User Guide

: July 30, 2024
: tp-link

Table of Contents

tp-link S200B Tapo Smart Button
How to Use Your Button
How to Replace the Battery
Safety Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link S200B Tapo Smart Button

Setup Video
Scan QR code or visit https://www.tp-link.com/support/setup-video/#home- smart-switches

Before You Start
A Tapo Hub is required. Make sure your Tapo Hub is successfully added via the Tapo app.

Power Up Your Button
Remove the battery insulation tab to power up your button. The LED should blink.
Note : If the LED is not blinking, refer to the reverse side for reset instructions.
Set Up Your Button
Open the Tapo app and tap the button. Select Switches/Buttons and then your model. Follow the app instructions to complete setup.
Test Your Button
a. Press the button to test it in your preferred location.
b. Refresh the home page on the Tapo app to confirm its status.
Secure Your Button (Optional)
Magnetically attach the button to metallic objects. Alternatively, you can attach the button to the provided bracket with either adhesive or screws.

How to Work with Alexa
Tapo works with Alexa to control your smart device by voice. You can choose one of the following methods to enjoy it.

Option 1:
In the Tapo app, go to Me > Third-Party Services > Amazon Alexa >Tapo Skill to set up.

Option 2:
In the Amazon Alexa app, go to More > Skills & Games and search for Tapo to enable it.

How to Use Your Button

Tap or rotate to control lights and appliances with custom Smart Actions.
Note: When using the button to control your devices, please ensure that there are no contradictory actions. For example, avoid having “single tap to turn on the light” and “single tap to turn off the light” as conflicting actions.

How to Reset Your Button

a. Press and hold the button for 5s. The LED will turn solid on for 10s.
b. Quickly press the button 3 times while the LED is solid on.
c. The LED should start to blink.

How to Replace the Battery

CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a safeguard.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

CAUTION : Do not ingest battery, Chemical Burn Hazard This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

CAUTION!
Risk of explosion if the battery is replaced by an incorrect type.

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU) 2015/863.
The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/
For EU/UK Region:
Operating Frequency / Nominal Operating Frequency / Max Output Power:
863~865 MHz/863.35 MHz/25 mW (e.r.p)
863~865 MHz/864.35 MHz/25 mW (e.r.p)
868~868.6 MHz/868.35 MHz/25 mW (e.r.p)
For US: 920.9 MHz/921.7MHz/922.3 MHzNominal Operating Frequency ©2024 TP-Link