CALEX HOLLAND 4582251 Round LED Wall Lamp Installation Guide
- July 29, 2024
- CALEX HOLLAND
Table of Contents
CALEX HOLLAND 4582251 Round LED Wall Lamp
Specifications
| Item | Quantity |
|---|---|
| Light Fixture | 1 |
| Hex Key | 1 |
| Screws | 2 |
| Wall Plugs | 2 |
What’s In The Box
Installation Steps
- Turn off the power supply.
- Diagram: A hand switching off a circuit breaker.
- Use the hex key to remove the screws from the light fixture.
- Diagram: Using a hex key to remove screws from the fixture.
- Mark the positions for the screws on the wall.
- Diagram: Marking two spots on the wall for screws.
- Drill holes at the marked positions using a 6mm drill bit.
- Diagram: Drilling holes and inserting wall plugs.
- Insert the wall plugs into the drilled holes.
- Diagram: Wall plugs inserted into the holes.
- Attach the mounting bracket to the wall using the screws.
- Diagram: Screwing the mounting bracket onto the wall.
- Connect the electrical wires as per the diagram: Blue to Blue, Brown to Brown.
- Diagram: Electrical wiring connections.
- Secure the light fixture to the mounting bracket using the hex key and screws.
- Diagram: Securing the light fixture to the bracket.
- Turn on the power supply.
- Diagram: A hand switching on a circuit breaker.
FAQ
Q: What tools do I need for installation?
A: You will need a hex key (included), a drill with a 6mm drill bit, and a screwdriver.
Q: How do I ensure the power is off before installation?
A: Turn off the circuit breaker that supplies power to the installation area.
Q: What should I do if the light does not turn on after installation?
A: Check the electrical connections and ensure the circuit breaker is turned on.
Electro Cirkel Retail B.V.
Lyonstraat 29, 3047 AJ Rotterdam, The Netherlands
WWW.CALEX.EU.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>