Motorola Solutions SL2600 Portable Radio User Guide

: July 29, 2024
: Motorola Solutions

Table of Contents

SL2600 Portable Radio
Product Information
Specifications:
- Product Usage Instructions
Chapter 1: Read Me First
Chapter 2: Introduction
Chapter 3: Radio Care
Chapter 4: Getting Started
Chapter 5: Radio Overview
Chapter 6: System Overview
Chapter 7: Zone and Channel Selections
Chapter 8: Types of Radio Calls
Chapter 9: Phone Calls
- FAQ
Q: How do I update the software version of my MOTOTRBO™ SL2600
Q: Can I use the radio in both analog and digital modes?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SL2600 Portable Radio

“`html

Product Information

Specifications:

Product Name: MOTOTRBO™ PROFESSIONAL DIGITAL TWO-WAY RADIO
SL2600
User Guide Date: February 2024
Model Number: MN008365A01-AC

Product Usage Instructions

Chapter 1: Read Me First

Ensure you are familiar with the software version mentioned in
the user guide.

Chapter 2: Introduction

Read through the introduction section to understand the basic
features of the radio.

Chapter 3: Radio Care

Follow the guidelines provided to ensure proper care and
maintenance of your radio for longevity.

Chapter 4: Getting Started

Refer to this section for step-by-step instructions on how to
set up and start using your radio.

Chapter 5: Radio Overview

Learn about the programmable buttons and icons on the radio for
easy navigation and usage.

Chapter 6: System Overview

Understand the different modes like Conventional Analog, Digital
Modes, IP Site Connect, and Capacity Plus for varied usage
scenarios.

Chapter 7: Zone and Channel Selections

Follow instructions on selecting zones and channels for
effective communication.

Chapter 8: Types of Radio Calls

Learn how to make calls on the radio and respond to incoming
calls efficiently.

Chapter 9: Phone Calls

Explore how to handle phone calls using the radio
functionality.

FAQ

Q: How do I update the software version of my MOTOTRBO™ SL2600

radio?

A: To update the software version, refer to the user guide for
detailed instructions on the update process.

Q: Can I use the radio in both analog and digital modes?

A: Yes, the radio supports both conventional analog and digital
modes for versatile communication options.

“`

MOTOTRBOTM
PROFESSIONAL DIGITAL TWO-WAY RADIO
SL2600 Portable Radio User Guide

FEBRUARY 2024
© 2024 Motorola Solutions, Inc. All Rights Reserved.

MN008365A01
MN008365A01-AC

MN008365A01-AC Contents
Contents
Legal and Support………………………………………………………………………………………………… 7
Intellectual Property and Regulatory Notices……………………………………………………………………………….7 Legal and Compliance Statements……………………………………………………………………………………………. 8
Important Safety Information……………………………………………………………………………………………8 Regulatory Compliance Information………………………………………………………………………………….8 Warranty and Service Support………………………………………………………………………………………………….. 8 Batteries and Chargers Warranty……………………………………………………………………………………..8
The Workmanship Warranty…………………………………………………………………………………..8 The Capacity Warranty………………………………………………………………………………………….8 Limited Warranty…………………………………………………………………………………………………………… 9 MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS…………………………………….. 9 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:…………………………………. 9 II. GENERAL PROVISIONS…………………………………………………………………………………..9 III. STATE LAW RIGHTS:……………………………………………………………………………………. 10 IV. HOW TO GET WARRANTY SERVICE…………………………………………………………….. 10 V. WHAT THIS WARRANTY DOES NOT COVER…………………………………………………..10 VI. PATENT AND SOFTWARE PROVISIONS……………………………………………………….. 10 VII. GOVERNING LAW………………………………………………………………………………………..11
Chapter1:Read Me First……………………………………………………………………………………… 12
1.1 Software Version………………………………………………………………………………………………………………13
Chapter2:Introduction…………………………………………………………………………………………14 Chapter3:Radio Care…………………………………………………………………………………………..15 Chapter4:Getting Started…………………………………………………………………………………….16
4.1 Charging the Battery………………………………………………………………………………………………………… 16 4.2 Attaching the Battery…………………………………………………………………………………………………………16 4.3 Removing the Battery………………………………………………………………………………………………………. 17 4.4 Attaching the Antenna……………………………………………………………………………………………………….17 4.5 Removing the Antenna…………………………………………………………………………………………………….. 17 4.6 Attaching the Earpiece or Audio Accessory………………………………………………………………………….18 4.7 Turning Radio On or Off…………………………………………………………………………………………………….18 4.8 Locking and Unlocking the Radio Display…………………………………………………………………………….18 4.9 Adjusting the Volume……………………………………………………………………………………………………….. 19
Chapter5:Radio Overview……………………………………………………………………………………20
5.1 Programmable Buttons…………………………………………………………………………………………………….. 21 5.2 Icons……………………………………………………………………………………………………………………………… 23
2

MN008365A01-AC Contents
5.2.1 Display Icons……………………………………………………………………………………………………….24 5.2.2 Advanced Menu Icons…………………………………………………………………………………………..25 5.2.3 Call Icons…………………………………………………………………………………………………………… 25 5.2.4 Mini Notice Icons………………………………………………………………………………………………….26 5.2.5 Sent Items Icons…………………………………………………………………………………………………. 26 5.3 LED Indications………………………………………………………………………………………………………………..26
Chapter6:System Overview…………………………………………………………………………………28
6.1 Conventional Analog and Digital Modes……………………………………………………………………………… 28 6.2 IP Site Connect……………………………………………………………………………………………………………….. 28 6.3 Capacity Plus………………………………………………………………………………………………………………….. 28
Chapter7:Zone and Channel Selections……………………………………………………………… 30
7.1 Selecting Zones………………………………………………………………………………………………………………. 30 7.2 Selecting a Channel………………………………………………………………………………………………………….30
Chapter8:Types of Radio Calls…………………………………………………………………………… 31
8.1 Making Calls on the Radio………………………………………………………………………………………………… 32 8.2 Receiving and Responding to Calls on the Radio………………………………………………………………….32
Chapter9:Phone Calls………………………………………………………………………………………… 33
9.1 Making Phone Calls…………………………………………………………………………………………………………. 33 9.2 Receiving and Responding to Phone Calls…………………………………………………………………………..33
Chapter10:Initiating Transmit Interrupt………………………………………………………………..35 Chapter11:Advanced Features…………………………………………………………………………….36
11.1 Analog Message Encode………………………………………………………………………………………………… 36 11.1.1 Sending MDC Encode Messages to Dispatchers…………………………………………………….36 11.1.2 Sending 5-Tone Encode Messages to Contacts…………………………………………………….. 36
11.2 Analog Status Update…………………………………………………………………………………………………….. 37 11.2.1 Sending Status Updates to Predefined Contacts……………………………………………………. 37 11.2.2 Viewing 5-Tone Status Details………………………………………………………………………………37
11.3 Auto-Range Transponder System……………………………………………………………………………………..37 11.4 Bluetooth®……………………………………………………………………………………………………………………..38
11.4.1 Turning the Bluetooth On……………………………………………………………………………………. 38 11.4.2 Turning the Bluetooth Off……………………………………………………………………………………..39 11.4.3 Connecting to Bluetooth Devices…………………………………………………………………………. 39 11.4.4 Disconnecting from Bluetooth Devices…………………………………………………………………..39 11.4.5 Switching Audio Route between Internal Radio Speaker and Bluetooth Device…………..40 11.4.6 Viewing Device Details……………………………………………………………………………………….. 40 11.4.7 Deleting Device Names……………………………………………………………………………………….40 11.4.8 Adjusting Bluetooth Mic Gain Values……………………………………………………………………..40 11.4.9 Permanent Bluetooth Discoverable Mode………………………………………………………………40
3

MN008365A01-AC Contents
11.5 Call Alert Operation…………………………………………………………………………………………………………41 11.5.1 Making Call Alerts……………………………………………………………………………………………….41 11.5.2 Responding to Call Alerts…………………………………………………………………………………….41
11.6 Call Indicator Settings…………………………………………………………………………………………………….. 41 11.6.1 Activating or Deactivating Call Ringers…………………………………………………………………. 41 Activating Call Ringers……………………………………………………………………………………….. 41 Deactivating Call Ringers……………………………………………………………………………………. 42 11.6.2 Assigning Ring Styles………………………………………………………………………………………….42 11.6.3 Selecting Ring Alert Types………………………………………………………………………………….. 42 11.6.4 Alarm Tone Volume Escalation……………………………………………………………………………..43
11.7 Call Log Features……………………………………………………………………………………………………………43 11.7.1 Viewing Recent Calls…………………………………………………………………………………………..43 11.7.2 Deleting Calls from the Call List…………………………………………………………………………… 43 11.7.3 Viewing Details from the Call List…………………………………………………………………………. 43
11.8 Contacts Settings…………………………………………………………………………………………………………… 44 11.8.1 Making Group Calls or Private Calls with Contact List…………………………………………….. 44 11.8.2 Setting Default Contacts………………………………………………………………………………………44
11.9 Covert Mode…………………………………………………………………………………………………………………..45 11.9.1 Entering or Exiting Covert Mode……………………………………………………………………………45
11.10 Emergency Operation…………………………………………………………………………………………………… 45 11.10.1 Sending Emergency Alarms……………………………………………………………………………….46 11.10.2 Sending Emergency Alarms with Call…………………………………………………………………. 46 11.10.3 Sending Emergency Alarms with Voice to Follow…………………………………………………. 47 11.10.4 Receiving Emergency Alarms……………………………………………………………………………. 47 11.10.5 Reinitiating the Emergency Mode………………………………………………………………………..47 11.10.6 Exiting the Emergency Mode………………………………………………………………………………48
11.11 Entering the Front Panel Programming……………………………………………………………………………. 48 11.12 Home Channel Reminder……………………………………………………………………………………………….48
11.12.1 Muting the Home Channel Reminder………………………………………………………………….. 48 11.12.2 Setting New Home Channels…………………………………………………………………………….. 49 11.13 Indoor Location……………………………………………………………………………………………………………..49 11.13.1 Turning the Indoor Location On…………………………………………………………………………..49 11.13.2 Turning the Indoor Location Off…………………………………………………………………………..49 11.13.3 Accessing Indoor Location Beacons Information………………………………………………….. 50 11.14 Lone Worker…………………………………………………………………………………………………………………50 11.15 Monitor Feature…………………………………………………………………………………………………………….50 11.15.1 Monitoring Channels………………………………………………………………………………………….50 11.15.2 Permanent Monitor……………………………………………………………………………………………51
11.15.2.1 Setting the Permanent Monitor………………………………………………………………. 51
4

MN008365A01-AC Contents
11.16 Remote Monitor…………………………………………………………………………………………………………….51 11.16.1 Initiating the Remote Monitor………………………………………………………………………………52
11.17 Mute Mode………………………………………………………………………………………………………………….. 52 11.17.1 Turning the Mute Mode On…………………………………………………………………………………53 11.17.2 Setting the Mute Mode Timer…………………………………………………………………………….. 53 11.17.3 Exiting the Mute Mode……………………………………………………………………………………….53
11.18 Notification List……………………………………………………………………………………………………………..54 11.18.1 Accessing the Notification List…………………………………………………………………………….54
11.19 Over-the-Air Programming…………………………………………………………………………………………….. 54 11.20 Scan…………………………………………………………………………………………………………………………… 55
11.20.1 Turning the Scan On………………………………………………………………………………………… 55 11.20.2 Turning the Scan Off………………………………………………………………………………………….55 11.20.3 Nuisance Channels………………………………………………………………………………………….. 56
11.20.3.1 Deleting Nuisance Channels…………………………………………………………………. 56 11.20.3.2 Restoring Nuisance Channels……………………………………………………………….. 56 11.20.4 Vote Scan……………………………………………………………………………………………………….. 56 11.20.5 Scan Lists………………………………………………………………………………………………………..57 11.20.5.1 Viewing the Scan List…………………………………………………………………………… 57 11.20.5.2 Adding New Entries to the Scan List………………………………………………………. 57 11.20.5.3 Deleting Entries from the Scan List………………………………………………………… 57 11.20.5.4 Editing Priority for a Scan List…………………………………………………………………57 11.21 Radio Check…………………………………………………………………………………………………………………58 11.21.1 Sending Radio Checks………………………………………………………………………………………58 11.22 Received Signal Strength Indicator………………………………………………………………………………….58 11.22.1 Viewing RSSI Values…………………………………………………………………………………………58 11.23 Response Inhibit……………………………………………………………………………………………………………58 11.23.1 Setting the Response Inhibit……………………………………………………………………………….59 11.24 Rental Timer…………………………………………………………………………………………………………………59 11.24.1 Accessing Rental Timer Information…………………………………………………………………….59 11.24.2 Rental Expiry Reminder……………………………………………………………………………………..59 11.24.3 Extending the Rental Period……………………………………………………………………………….60 11.25 Security………………………………………………………………………………………………………………………. 60 11.25.1 Disabling Radios……………………………………………………………………………………………….60 11.25.2 Enabling Radios………………………………………………………………………………………………. 61 11.26 Text Messaging……………………………………………………………………………………………………………. 61 11.26.1 Viewing Text Messages…………………………………………………………………………………….. 62 11.26.2 Composing Text Messages……………………………………………………………………………….. 62 11.26.3 Sending Text Messages……………………………………………………………………………………. 62 11.26.4 Responding to Text Messages…………………………………………………………………………… 63
5

MN008365A01-AC Contents
11.26.5 Forwarding Text Messages…………………………………………………………………………………64 11.26.6 Deleting Text Messages……………………………………………………………………………………. 64 11.27 Wi-Fi Operation……………………………………………………………………………………………………………. 64 11.27.1 Turning Wi-Fi On or Off…………………………………………………………………………………….. 65 11.27.2 Turning Wi-Fi On or Off Using a Designated Radio (Individual Control)…………………… 65 11.27.3 Connecting to a Network Access Point……………………………………………………………….. 65 11.27.4 Checking Wi-Fi Connection Status………………………………………………………………………66 11.27.5 Viewing Details of Network Access Points…………………………………………………………… 66
Chapter12:Utilities………………………………………………………………………………………………68
12.1 Talkaround……………………………………………………………………………………………………………………. 68 12.1.1 Toggling Between Repeater and Talkaround Mode………………………………………………… 68
12.2 Setting Radio Tones and Alerts…………………………………………………………………………………………68 12.3 Setting Squelch Levels…………………………………………………………………………………………………… 69 12.4 Setting Power Levels……………………………………………………………………………………………………… 69 12.5 Adjusting Display Settings………………………………………………………………………………………………. 69 12.6 Setting Languages…………………………………………………………………………………………………………. 69 12.7 Setting LED Indicators……………………………………………………………………………………………………. 70 12.8 Password Lock……………………………………………………………………………………………………………….70
12.8.1 Accessing Radios with Password………………………………………………………………………… 70 12.8.2 Unlocking Radios in Locked State……………………………………………………………………….. 71 12.8.3 Setting the Password Lock…………………………………………………………………………………..71 12.8.4 Changing Passwords…………………………………………………………………………………………. 71 12.9 Voice Announcement……………………………………………………………………………………………………… 72 12.9.1 Setting the Voice Announcement…………………………………………………………………………. 72 12.10 Setting the Intelligent Audio…………………………………………………………………………………………… 72 12.11 Setting the Automatic Call Forwarding……………………………………………………………………………..72 12.12 Setting the Microphone Automatic Gain Control………………………………………………………………..73 12.13 Setting the Trill Enhancement………………………………………………………………………………………… 73 12.14 Setting the Acoustic Feedback Suppressor……………………………………………………………………… 73 12.15 Privacy……………………………………………………………………………………………………………………….. 74 12.15.1 Setting Privacy………………………………………………………………………………………………… 74 12.16 Voice Operating Transmission……………………………………………………………………………………….. 74 12.16.1 Setting the Voice Operating Transmission…………………………………………………………… 75 12.17 Accessing the Radio Information……………………………………………………………………………………. 75 12.18 Viewing Enterprise Wi-Fi Certificate Details………………………………………………………………………75
6

MN008365A01-AC Legal and Support
Legal and Support
Intellectual Property and Regulatory Notices
Copyrights
The Motorola Solutions products described in this document may include copyrighted Motorola Solutions computer programs. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola Solutions. No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc.
Trademarks
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
License Rights
The purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Open Source Content
This product may contain Open Source software used under license. Refer to the product installation media for full Open Source Legal Notices and Attribution content.
European Union (EU) and United Kingdom (UK) Waste of Electrical and Electronic Equipment (WEEE) Directive
The European Union’s WEEE directive and the UK’s WEEE regulation require that products sold into EU countries and the UK must have the crossed-out wheelie bin label on the product (or the package in some cases). As defined by the WEEE directive, this crossed-out wheelie bin label means that customers and end users in EU and UK countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end users in EU and UK countries should contact their local equipment supplier representative or service center for information about the waste collection system in their country.
Disclaimer
Please note that certain features, facilities, and capabilities described in this document may not be applicable to or licensed for use on a specific system, or may be dependent upon the characteristics of a specific mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola Solutions contact for further information.
7

MN008365A01-AC Legal and Support
© 2024 Motorola Solutions, Inc. All Rights Reserved
Legal and Compliance Statements
Important Safety Information
RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios
CAUTION: This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide that comes with the radio. This guide contains operating instructions for safe usage, RF energy awareness, and control for compliance with applicable standards and regulations.
Regulatory Compliance Information

Europe
This is to declare that MSI products comply with the EU Directive 2011/65/EU (Restriction of Hazardous Substance or RoHS-2) and India RoHS, including applicable exemptions, with respect to the following substances: Lead (Pb) < 0.1% by weight (1000 ppm) Mercury (Hg) < 0.1% by weight (1000 ppm) Cadmium (Cd) < 0.01% by weight (100 ppm) Hexavalent Chromium (Cr6+) < 0.1% by weight (1000 ppm) Polybrominated Biphenyls (PBB) < 0.1% by weight (1000 ppm) Polybrominated Diphenyl Ethers (PBDE) < 0.1% by weight (1000 ppm)
Warranty and Service Support

Batteries and Chargers Warranty

The Workmanship Warranty
The workmanship warranty guarantees against defects in workmanship under normal use and service.

SL Series Batteries Chargers (Single-Unit and Multi-Unit, Non-Display)

12 Months 12 Months

The Capacity Warranty
The capacity warranty guarantees 80% of the rated capacity for the warranty duration.

MN008365A01-AC Legal and Support

Lithium-Ion (Li-lon) Batteries

12 Months

Limited Warranty

MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS
I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
Motorola Solutions, Inc. (“Motorola Solutions”) warrants the Motorola Solutions manufactured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

Portable Radios Product Accessories

Two (2) Years One (1) Year

Motorola Solutions, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of Motorola Solutions.
This express limited warranty is extended by Motorola Solutions to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by Motorola Solutions. Motorola Solutions assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of Motorola Solutions.
Unless made in a separate agreement between Motorola Solutions and the original end user purchaser, Motorola Solutions does not warrant the installation, maintenance or service of the Product.
Motorola Solutions cannot be responsible in any way for any ancillary equipment not furnished by Motorola Solutions which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, Motorola Solutions disclaims liability for range, coverage, or operation of the system as a whole under this warranty.

II. GENERAL PROVISIONS
This warranty sets forth the full extent of Motorola Solutions responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at Motorola Solutions option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA SOLUTIONS BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.

MN008365A01-AC Legal and Support
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state.
IV. HOW TO GET WARRANTY SERVICE
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola Solutions through one of its authorized warranty service locations. If you first contact the company which sold you the Product (for example, dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola Solutions at 1-800-927-2744.
V. WHAT THIS WARRANTY DOES NOT COVER
1. Defects or damage resulting from use of the Product in other than its normal and customary manner. 2. Defects or damage from misuse, accident, water, or neglect. 3. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or
adjustment. 4. Breakage or damage to antennas unless caused directly by defects in material workmanship. 5. A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without
limitation, the addition to the Product of non-Motorola Solutions supplied equipment) which adversely affect performance of the Product or interfere with Motorola Solutions normal warranty inspection and testing of the Product to verify any warranty claim. 6. Product which has had the serial number removed or made illegible. 7. Rechargeable batteries if any of the seals on the battery enclosure of cells are broken or show evidence of tampering. 8. Rechargeable batteries if the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. 9. Freight costs to the repair depot. 10. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with Motorola Solutions published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from Motorola Solutions. 11. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. 12. Normal and customary wear and tear.
VI. PATENT AND SOFTWARE PROVISIONS
Motorola Solutions will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola Solutions will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: 1. Motorola Solutions will be notified promptly in writing by such purchaser of any notice of such claim,
10

MN008365A01-AC Legal and Support
2. Motorola Solutions will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and
3. Should the Product or parts become, or in Motorola Solutions opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit Motorola Solutions, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non- infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by Motorola Solutions.
Motorola Solutions will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by Motorola Solutions, nor will Motorola Solutions have any liability for the use of ancillary equipment or software not furnished by Motorola Solutions which is attached to or used in connection with the Product. The foregoing states the entire liability of Motorola Solutions with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted Motorola Solutions software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola Solutions software. Motorola Solutions software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such Motorola Solutions software or exercise of rights in such Motorola Solutions software is permitted. No license is granted by implication, estoppel or otherwise under Motorola Solutions patent rights or copyrights.
VII. GOVERNING LAW
This Warranty is governed by the laws of the State of Illinois, U.S.A.
11

MN008365A01-AC Chapter 1: Read Me First

Chapter 1
Read Me First
This user guide covers the basic operations of the radio models offered in your region.
Notations Used in This Manual
Throughout the text in this publication, you notice the use of Warning, Caution, and Notice. These notations are used to emphasize that safety hazards exist, and the care that must be taken or observed.
WARNING: An operational procedure, practice, or condition, and so on, which may result in injury or death if not carefully observed. CAUTION: An operational procedure, practice, or condition, and so on, which may result in damage to the equipment if not carefully observed. NOTE: An operational procedure, practice, or condition, and so on, which is essential to emphasize.

Special Notations
The following special notations are used throughout the text to highlight certain information or items:

Table 1: Special Notations Example Menu key or PTT button
Your radio shows Bluetooth On.

Setup Tone All Tones

Description
Bold words indicate a name of a key, button, or soft menu item.
Typewriter words indicate the MMI strings or messages displayed on your radio.
The courier, bold, italic, and angle brackets indicate user input.
Bold words with the arrow in between indicate the navigation structure in the menu items.

Feature and Service Availability
Your dealer or administrator may have customized your radio for your specific needs. NOTE: Not all features in the manual are available in your radio. Contact your dealer or administrator for more information.
You can consult your dealer or system administrator about the following: What are the functions of each button? Which optional accessories may suit your needs? What are the best radio usage practices for effective communication? What maintenance procedures promote longer radio life?

MN008365A01-AC Chapter 1: Read Me First
1.1
Software Version
All the features described in the following sections are supported by the software version: R02.24.01.1000 or later. Contact your dealer or administrator for more information.
13

MN008365A01-AC Chapter 2: Introduction

Chapter 2

Introduction

This user guide is written as per the highest tier model offered to the region. The following table describes ways to access features for the radio model.

Table 2: The Feature Access and Indications of the Radio Model

Radio Model

Radio Model Figure 1: SL2600

Feature Access Feature Indication

Menu Programmable Button
Tone LED indicator Display Voice Announcement or Text-to-Speech

NOTE: To understand which feature is available with the Programmable Button, you can refer to the Programmable Buttons on page 21 topic.

MN008365A01-AC Chapter 3: Radio Care

Chapter 3

Radio Care

This section describes the basic handling precaution of the radio.

Table 3: IP Specification IP Specification IP54

Description
Allows your radio to withstand adverse field conditions such as being exposed to water splashed from all directions or dust protected for 28 hours.

CAUTION: Do not disassemble your radio. This could damage radio seals and result in leak paths into the radio. Radio maintenance should only be done in service depot that is equipped to test and replace the seal on the radio.
Keep your radio clean and exposure to water should be avoided to help ensure proper functionality and performance.
To clean the exterior surfaces of the radio, use a diluted solution of mild dishwashing detergent and fresh water (for example, one teaspoon of detergent to one gallon of water).
These surfaces should be cleaned whenever a periodic visual inspection reveals the presence of smudges, grease, and/or grime.
CAUTION: The effects of certain chemicals and their vapors can have harmful results on certain plastics. Avoid using aerosol sprays, tuner cleaners, and other chemicals.
When cleaning your radio, do not use a high-pressure jet spray on radio as this may cause water to leak into your radio.

MN008365A01-AC Chapter 4: Getting Started
Chapter 4
Getting Started
This chapter provides instructions on how to prepare your radio for use. 4.1
Charging the Battery
Your radio is powered by a Lithium-Ion (Li-Ion) battery. Prerequisites: Turn off your radio when charging. Procedure:
Charge your battery only in non-hazardous areas. After battery is charged, allow your radio to rest for at least 3 minutes.
To comply with warranty terms and avoid damage, charge the battery using a Motorola Solutions authorized charger.
Charge a new battery 14 to 16 hours before initial use for best performance. Batteries charge best at room temperature. NOTE: PC USB charging is not supported on flat battery. You may charge your battery by connecting the USB charger to a nearby and easily accessible wall power outlet.
4.2
Attaching the Battery
Procedure: 1. Fit the battery into the battery slot of the radio. 2. Place the back cover into position and press until it snaps into place. 3. Slide the battery latch into lock position.
16

MN008365A01-AC Chapter 4: Getting Started
Postrequisites: NOTE: If the radio is attached with the wrong battery, your radio shows the following indications: A low pitched warning tone sounds. The red LED blinks. The display shows Wrong Battery The Voice Announcement or TexttoSpeech sounds if loaded using CPS. If the radio is attached with an unsupported battery, your radio shows the following indications: An alert tone sounds. The display shows Unknown Battery. Battery icon is disabled. The certification of the radio is voided if you attach a UL battery to an FM approved radio or vice versa. If your radio is attached with an unsupported or wrong battery, immediately swap with the correct battery.
4.3
Removing the Battery
Prerequisites: Ensure that your radio is turned off. Procedure:
1. Move the battery latch into unlock position. 2. Remove the back cover. 3. Take the battery out from the battery slot.
4.4
Attaching the Antenna
Procedure: 1. Set the antenna in the receptacle. 2. Turn the antenna clockwise. NOTE: Fastening the antenna blocks water and dust from entering the radio.
CAUTION: To prevent damages, replace the faulty antenna with only MOTOTRBO antennas.
4.5
Removing the Antenna
Procedure: 1. Turn the antenna counterclockwise. 2. Remove the antenna from the receptacle.
17

MN008365A01-AC Chapter 4: Getting Started
4.6
Attaching the Earpiece or Audio Accessory
The audio accessory connector is located on the right side of the radio. Follow the procedure to attach accessories to your radio.
Procedure: 1. Lift the flap of the audio jack cover. 2. Align the indicators on both the connector and housing, then push until it fits in properly.
4.7
Turning Radio On or Off
Procedure: Press and hold the Power/Information button.
Result: If turning radio on successful, your radio shows the following indications: A tone sounds.
NOTE: If the Tones/Alerts function is disabled, there is no tone upon powering up.
The green LED illuminates. The display shows power-on animation. The Home screen lights up. If turning radio off successfully, your radio shows the following indications: A tone sounds. The Home screen turns off. Postrequisites: If your radio does not power up, check your battery. Make sure that the battery is charged and properly attached. Contact your dealer if your radio still does not power up.
4.8
Locking and Unlocking the Radio Display
Procedure: Short press the On/Off button.
Result: If locking radio is successful, your radio shows the following indications: The radio display turns off. The touch screen keypad is hidden and inactive. If unlocking radio is successful, your radio shows the following indications: The radio display lights up. The touch screen keypad is visible and active.
18

MN008365A01-AC Chapter 4: Getting Started
4.9
Adjusting the Volume
Procedure: Perform one of the following actions: To increase the volume, press the Volume Up button. To decrease the volume, press the Volume Down button. NOTE: Your radio can be programmed to have a minimum volume offset where the volume level cannot be lowered past the programmed minimum volume.
19

MN008365A01-AC Chapter 5: Radio Overview
Chapter 5
Radio Overview
Radio overview explains the buttons, icons, and LED indications of your radio
Radio Overview

1 16
2

3 4

5
6 7
8

Table 4: Callout Legend

Label 1 2

Item Channel Rocker Power/Information button

LED Indicator

15
14
13 12
11
10 9
Description To select channel. To turn your radio on or off. When the radio is turned on, you can perform the following actions: To check the battery strength. To check the Received Signal
Strength Indicator (RSSI). To check radio name by pressing
the button twice. The red, green, and amber light-emitting diodes indicate operating status.

MN008365A01-AC Chapter 5: Radio Overview

Label 4 5 6
7
8
9
10
11 12 13 14
15
16

Item Push-To-Talk (PTT) button Volume button Side button P1/Left Navigation Button1 Menu/OK Button1 Back/Home Button1 P2/Right Navigation Button1
Display (LCD) Microphone Micro-USB Connector Accessory Connector
Speaker
Antenna

Description
To execute voice operations (for example, Group Call and Private Call).
To adjust volume.
This button is field programmable using the Customer Programming Software (CPS).
This button is field programmable using the Customer Programming Software (CPS).
This button is field programmable using the Customer Programming Software (CPS).
This button is field programmable using the Customer Programming Software (CPS).
This button is field programmable using the Customer Programming Software (CPS).
To provide visual information about many radio features.
Allows the voice to be sent when PTT or voice operations are activated.
To charge radio.
Interface point for all accessories to be used with the radio. It has twelve points to which specific accessories will connect and be activated.
Outputs all tones and audio that are generated by the radio (for example, features like keypad tones and voice audio).
Provides the needed RF amplification when transmitting or receiving.

5.1
Programmable Buttons
You can program the programmable buttons as shortcuts to the following radio functions through programming software.
NOTE: Contact your dealer for more information.

1 These buttons become visible when the radio is unlocked. 21

MN008365A01-AC Chapter 5: Radio Overview

Table 5: Assignable Radio Functions

Function

Description

All Alert Tones Analog Scrambling Analog Scrambling Code Audio Profiles Audio Toggle
Backlight Backlight Brightness Battery Indicator Bluetooth® Audio Switch
Bluetooth Connect Bluetooth Disconnect
Bluetooth Discoverable
Call Alert.
Call Forwarding Call Log Channel Announcement
Confirm Contacts Emergency Off Emergency On Indoor Location Intelligent Audio Manual Site Roam Mic AGC
Monitor Mute Mode Notifications Nuisance Delete

Allows you to toggle all tones and alerts to on or off.
Allows you to toggle the Analog Scrambling feature to on or off.
Allows you to toggle the Analog Scrambling Code feature to on or off.
Allows you to select the preferred audio profiles.
Allows you to toggle the audio routing between the internal radio speaker and the wired accessory speaker.
Allows you to toggle the display backlight to on or off.
Allows you to adjust the brightness level.
Allows you to check the current status of the battery level.
Allows you to toggle the audio routing between an internal radio speaker and an external Bluetooth-enabled accessory.
Allows you to initiate a Bluetooth find-and-connect operation.
Allows you to terminate all existing Bluetooth connections between your radio and any Bluetooth-enabled devices.
Allows you to enable your radio to enter Bluetooth Discoverable Mode.
Allows you to direct access to the contacts list and select the required contact to send a call alert.
Allows you to toggle the Call Forwarding to on or off.
Allows you to select the call log list.
Allows you to play zone and channel announcement voice messages in the current channel.
Allow you to confirm a feature.
Provides direct access to the contacts list.
Allows you to terminate an outgoing emergency call.
Allows you to set up an emergency call.
Allows you to toggle the Indoor Location to on or off.
Allows you to toggle intelligent audio to on or off.
Allows you to start the manual site search.
Allows you to toggle the internal microphone automatic gain control (AGC) to on or off.
Allows you to monitor a channel.
Allows you to turn Mute Mode on or off.
Allows you to direct access to the notification list.
Allows you to temporarily remove an unwanted channel from the scan list, except the Selected Channel. The nuisance deleted channel will be restored into the scan list, for instance, when radio is powered off and back on again (not applicable in Capacity Plus).

MN008365A01-AC Chapter 5: Radio Overview

Function One Touch Access Permanent Monitor
Phone Power Level Privacy Radio Alias and ID Radio Check Radio Enable or Disable Remote Monitor
Repeater or Talkaround
Reset Home Channel Ring Alert Type Scan Silence Home Channel Reminder Site Lock
Text Message TX Interrupt Remote Dekey
Trill Enhancement Voice Announcement Voice Operating Transmission (VOX) Wi-Fi Zone Selection

Description Allows you to direct access to the predefined call features. Allows you to monitor a selected channel for all radio traffic until function is disabled (not applicable in Capacity Plus). Allows you to direct access to the phone contact list. Allows you to toggle the transmit power to high or low. Allows you to toggle the privacy to on or off. Provide radio alias and ID. Allows you to check if the radio is active in the system. Allows a target radio to be remotely enabled or disabled. Allows you to turn on the microphone of a target radio without giving any indications. Allows you to toggle between using a repeater and directly communicating with another radio. Allows you to select a new home channel. Allows you to direct access the Ring Alert Type setting. Allows you to toggle the scan to on or off. Allows you to mute the Home Channel Reminder.
Allows you to enable the site lock to search only in current site or disable the site lock to search in other sites as well. Allows you to select the text message menu. Allows you to stop an on-going voice call by dekeying the transmitting radio or terminate the repeater call hang time in order to free up the channel. This button can also be used to end a Remote Monitor session. Allows you to toggle the trill enhancement to on or off. Allows you to toggle the Voice Announcement to on or off. Allows you to toggle the VOX to on or off.
Allows you to toggle the Wi-Fi to on or off. Allows you to select from a list of zones.

5.2
Icons
Icons are only available for radio with display.
Your radio display shows the radio status, text entries, and menu entries.

MN008365A01-AC Chapter 5: Radio Overview

5.2.1
Display Icons
The following icons appear on the status bar at the top of the radio display. The icons are arranged left most in order of appearance or usage, and are channel-specific.

Table 6: Display Icons Icon

Description Battery Bluetooth Connected

Bluetooth Not Connected

Emergency

High Volume Data

Monitor

Mute Mode

Notification

Over-the-Air Programming Delay Timer Power High Power Low Received Signal Strength Indicator (RSSI) Response Inhibit

or 2 Not available in Capacity Plus.

Ring Only Scan2 Scan Priority 1 or Priority 22 Secure

Icon

Description Site Roaming3 Talkaround2 Tones Disable Unsecure Vote Scan Wi-Fi

MN008365A01-AC Chapter 5: Radio Overview

5.2.2
Advanced Menu Icons
The following icons appear beside menu items that offer a choice between two options or as an indication that there is a sub-menu offering two options.

Table 7: Advanced Menu Icons Icon

Description

Checkbox (Checked)

Checkbox (Empty) Solid Black Box

5.2.3
Call Icons
The following icons appear on the display during a call. These icons also appear in the Contacts list to indicate alias or ID type.

Table 8: Call Icons

Icons

Description Private Call

3 Not available in Capacity Plus-Single Site. 25

MN008365A01-AC Chapter 5: Radio Overview
Icons

Description Group Call/All Call
Phone Call as Group or All Call
Phone Call as Private Call

5.2.4
Mini Notice Icons
The following icons appear momentarily on the display after an action to perform a task is taken.

Table 9: Mini Notice Icons

Icon

Description

Failed Transmission (Negative)

Successful Transmission (Positive)

Transmission in Progress (Transitional)

5.2.5
Sent Items Icons
The following icons appear at the top right corner of the display in the Sent Items folder.

Table 10: Sent Items Icons Icon or or or

In Progress

Description

Send Failed

Sent Successfully

5.3
LED Indications
The LED Indicator shows the operational status of your radio.
A qualified technician can permanently disable the LED indication by preprogramming it.

Table 11: LED Indications Indication Solid Red Blinking Red
Solid Yellow Blinking Yellow Double Blinking Yellow
Solid Green Blinking Green
Double Blinking Green

MN008365A01-AC Chapter 5: Radio Overview
Status The radio is charging.
The radio has failed the self-test upon powering up. The radio is receiving an emergency transmission. The radio is transmitting in low battery state. The radio has moved out of range if Auto-Range Transponder
System is configured. Mute Mode is enabled. The radio encounters charging errors.
The radio is monitoring a conventional channel.
The radio has yet to respond to a Call Alert. The radio is scanning for activity. The radio has Flexible Receive List enabled. All Capacity-Plus Multi-Site channels are busy.
The radio has Auto Roaming enabled. The radio is actively searching for a new site. The radio has yet to respond to a Group Call Alert. The radio is locked. The radio is not connected to the repeater while in Capacity Plus. All Capacity-Plus channels are busy.
The radio is powering up. The radio is transmitting. The radio is sending a Call Alert or an emergency transmission.
The radio is receiving a call or data. The radio is retrieving the Over-the- Air Programming transmis-
sions. The radio is detecting activity over the air. The radio is turned on and in idle mode.
NOTE: The activity may or may not affect the programmed channel of the radio due to the nature of the digital protocol. The radio is receiving a privacy- enabled call or data.

MN008365A01-AC Chapter 6: System Overview
Chapter 6
System Overview
System overview explains what type of systems and modes available in the radio.
6.1
Conventional Analog and Digital Modes
Each channel in your radio can be configured as a conventional analog or conventional digital channel. Certain features are unavailable when switching from digital to analog mode and analog to digital mode, whereas some are available in both. There are minor differences on how each feature works but they do not affect the performance of your radio.
6.2
IP Site Connect
This feature allows your radio to extend conventional communication beyond the reach of a single site by connecting to different available sites by using an Internet Protocol (IP) network. When the radio moves out of range from one site and into the range of another, the radio connects to the repeater of the new site to send or receive calls or data transmissions. This is done either automatically or manually depending on your settings. In an automatic site search, the radio scans through all available sites when the signal from the current site is weak or when the radio is unable to detect any signal from the current site. The radio then locks on to the repeater with the strongest Received Signal Strength Indicator (RSSI) value. In a manual site search, the radio searches for the next site in the roam list that is currently in range but which may not have the strongest signal and locks on to the repeater.
NOTE: Each channel can only have either Scan or Roam enabled, not both at the same time.
Channels with this feature enabled can be added to a particular roam list. The radio searches the channels in the roam list during the automatic roam operation to locate the best site. A roam list supports a maximum of 16 channels, including the selected channel.
NOTE: You cannot manually add or delete an entry in the roam list. Contact your dealer for more information.
6.3
Capacity Plus
Capacity Plus is a cost effective and entry-level digital trunked system. It expands the capacity and extends the coverage for single and multi-sites. The single and multi-sites dynamic trunking offers better capacity and coverage.
NOTE: If you try to access a feature not applicable to Capacity PlusSingle- Site or Capacity PlusMultiSite by using a programmable button, you hear a negative indicator tone.
28

MN008365A01-AC Chapter 6: System Overview
Capacity PlusSingle-Site
Capacity PlusSingle-Site is a single-site trunking configuration of the MOTOTRBO radio system, which uses a pool of channels to support hundreds of users and up to 254 groups. This configuration allows your radio to efficiently utilize the number of available programmed channels while in Repeater Mode. Your radio also has features that are available in conventional digital mode, IP Site Connect, and Capacity Plus.
Capacity PlusMulti-Site
Capacity PlusMulti-Site is a multi-channel trunking configuration of the MOTOTRBO radio system, combining the best of both Capacity Plus and IP Site Connect configurations. It is also known as Linked Capacity Plus. It allows your radio to extend trunking communication beyond the reach of a single site, by connecting to different available sites which are connected with an IP network. It also provides an increase in capacity by efficiently utilizing the combined number of available programmed channels supported by each of the available sites. When your radio moves out of range of one site and into the range of another, it connects to the repeater of the new site to send or receive calls or data transmissions. Depending on your settings, this is done automatically or manually. Automatically
Your radio scans through all available sites when the signal from the current site is weak or unable to detect any signal and locks on to the repeater with the strongest RSSI value. Manually Your radio searches for the next site in the roam list that is currently in range which may not have the strongest signal, and locks on to it. Any channel with Capacity Plus Multi-Site enabled can be added to a roam list. Your radio searches these channels during the automatic roam operation to locate the best site.
NOTE: You cannot manually add or delete an entry in the roam list.
29

MN008365A01-AC Chapter 7: Zone and Channel Selections

Chapter 7

Zone and Channel Selections

A zone is a group of channels. You can program each channel with different features that support different groups of users.

Table 12: Number of Supported Zones and Channels

Zones 50

Channels 128

Channels per Zone 16

7.1
Selecting Zones
Procedure: From the menu, select Zone .
Result: The display shows Selected.
7.2
Selecting a Channel
Procedure: Push the Channel Rocker. NOTE: If Virtual Channel Stop is enabled, your radio stops proceeding beyond the first or the last channel, and a tone is heard.
Result: The radio displays the current channel and sounds the Voice Announcement.

MN008365A01-AC Chapter 8: Types of Radio Calls

Chapter 8

Types of Radio Calls

There are several ways that you can make a call with your radio depending on the types of calls and system available on your radio.

Table 13: Types of Radio Calls Call Type Group Call
Broadcast Voice Call
Private Call
Selective Call All Call
Unaddressed Call Open Voice Channel Mode (OVCM)

Description
A Group Call is a point-to-multipoint call operation. Your radio must be configured as a member of the group for you to communicate with each other.
A Broadcast Voice Call is a one-way voice call from any user to an entire talkgroup. The Broadcast Call feature allows only the call initiating user to transmit to the talkgroup, while the recipients of the call cannot respond.
A Private Call is a call from an individual radio to another individual radio. You can set up a Private Call after performing a radio presence check or call immediately.
A Selective Call is a call from an individual radio to another individual radio. This feature is only supported in Analog system.
An All Call is a call from an individual radio to every radio on the site or every radio at a group of sites. This feature is used to make an important announcement.
An Unaddressed Call is a group call to one of the 16 predefined group IDs.
An OVCM is a call from a radio that is not preconfigured to work in a particular system during a group or individual call. The OVCM group call supports broadcast calls.

When a call is interrupted, you hear a continuous Talk Prohibit Tone. Releasing the PTT button allows you to receive the call.
Channel Free Indication feature can be programmed on your radio by your dealer. If the Channel Free Indication feature is enabled, you hear a short alert tone when the recipient releases the PTT button, indicating the channel is free for you to respond.
NOTE: If you would like to make a 5-Tone Call, you are required to purchase for a Software License Key separately.

MN008365A01-AC Chapter 8: Types of Radio Calls

8.1
Making Calls on the Radio

Procedure: Perform one of the following actions based on the type of calls:

Option Making group calls, private calls, unaddressed calls, or selective calls
Making broadcast calls, all calls, or OVCM calls

Actions
a. Select a channel with an active ID or alias. b. To call, press and hold the PTT button. c. Wait for the Talk Permit Tone to end, and
speak into the microphone. d. To listen, release the PTT button.
a. Select a channel with an active group ID or alias.
b. To call, press and hold the PTT button. c. Wait for the Talk Permit Tone or PTT Side-
tone to end, and speak into the microphone.

If your radio does not detect voice activity for a predetermined period, the call ends.

8.2
Receiving and Responding to Calls on the Radio
When you receive calls, your radio shows the following indications: The green LED blinks. Your radio unmutes and the incoming call sounds through the speaker. The display shows the ID and alias and call status.
NOTE: You cannot respond to a Broadcast Call or All Call.

Procedure: 1. To respond, press and hold the PTT button. 2. Wait for the Talk Permit Tone to end, and speak into the microphone. NOTE: For Group Call, wait for the PTT Sidetone to end, and speak into the microphone if enabled.
3. To listen, release the PTT button.

MN008365A01-AC Chapter 9: Phone Calls
Chapter 9
Phone Calls
A Phone Call is a call in between an individual radio or a group of radios and a telephone. Depending on how the radio is configured, the following features may or may not be made available: Access code. Dual Tone Multi Frequency (DTMF) tone. De-access code. Displaying of caller alias or ID on receiving a phone call. Ability to reject or accept a phone call. The Phone Call capability can be enabled by assigning and setting up phone numbers on the system. Contact your dealer to determine how your radio has been programmed.
9.1
Making Phone Calls
Procedure: 1. From the menu, select Phone . 2. To call, press and hold the PTT button. 3. To listen, release the PTT button. 4. While you are in the Phone call, you can perform any of the following actions if required: Enter extra digits by using the Keypad. To end the call, select the Back/Home button. To deaccess a code, enter the deaccess code by using the Keypad when the display shows De-Access Code:.
Result: If the call ends successfully, your radio shows the following indications: A tone sounds. The display shows Call Ended.
9.2
Receiving and Responding to Phone Calls
When you receive a phone call, your radio shows the following indications: The green LED blinks. Your radio unmutes and the incoming call sounds through the speaker. The display shows the Phone Call icon and the call status.
Procedure: 1. To respond to the phone call, press and hold the PTT button. 2. Wait for the Talk Permit Tone to end, and speak into the microphone.
33

MN008365A01-AC Chapter 9: Phone Calls
3. To listen, release the PTT button. 4. To end the call, select the Back/Home button.
NOTE: Your radio is not able to terminate a phone call as a group call. The telephone user must end the call. The recipient user is only allowed to talk back during the call. Result: If the call ends successfully, your radio shows the following indications: A tone sounds. The display shows Call Ended.
34

MN008365A01-AC Chapter 10: Initiating Transmit Interrupt
Chapter 10
Initiating Transmit Interrupt
Procedure: To interrupt an ongoing call, perform one of the following actions: Press the PTT button. Press the Emergency button.
35

MN008365A01-AC Chapter 11: Advanced Features
Chapter 11
Advanced Features
This chapter explains the operations of the features available in your radio.
11.1
Analog Message Encode
Your radio can send preprogrammed messages from the Message list to a radio alias or the dispatcher.
11.1.1
Sending MDC Encode Messages to Dispatchers
Procedure: From the menu, select Message Quick Text .
Result: If the request is successful, your radio shows the following indications: A positive indicator tone sounds. The display shows a positive mini notice. If the request is unsuccessful, your radio shows the following indications: A negative indicator tone sounds. The display shows a negative mini notice.
11.1.2
Sending 5-Tone Encode Messages to Contacts
Procedure: From the menu, select Message Quick Text

. Result: If the request is successful, your radio shows the following indications: A positive indicator tone sounds. The display shows a positive mini notice. If the request is unsuccessful, your radio shows the following indications: A negative indicator tone sounds. The display shows a negative mini notice. 36

MN008365A01-AC Chapter 11: Advanced Features
11.2
Analog Status Update
Your radio can send preprogrammed messages from the Status List indicating your current activity to a radio contact (for 5-Tone systems) or the dispatcher (for Motorola Data Communication systems). For Motorola Data Communication (MDC) systems, the last acknowledged message is kept at the top of the Status list. The other messages are arranged in alphanumeric order.
11.2.1
Sending Status Updates to Predefined Contacts
Procedure: Perform one of the following actions: For Motorola Data Communication (MDC) systems, from the menu, select Status Set as Default Menu/OK. For 5-Tone systems, from the menu, select Status

Set as Default. Result: For MDC systems, if the request is successful, your radio shows the following indications: A positive indicator tone sounds. The display shows a positive mini notice. For MDC systems, if the request is unsuccessful, your radio shows the following indications: A negative indicator tone sounds. The display shows a negative mini notice. For 5-Tone systems, if the request is successful, your radio display shows a beside the acknowledged status. For 5-Tone systems, if the request is unsuccessful, your radio display shows a beside the previous status. 11.2.2 Viewing 5-Tone Status Details Prerequisites: Purchase the Software License Key. Procedure: From the menu, select Status View Details. Result: The display shows details of the selected status. 11.3 Auto-Range Transponder System The Auto-Range Transponder System (ARTS) is an analog-only feature designed to inform you when your radio is out-of-range of other ARTS-equipped radios. ARTS-equipped radios transmit or receive signals periodically to confirm that they are within range of each other. Your radio provides indications as follows: 37

MN008365A01-AC Chapter 11: Advanced Features

Table 14: Auto-Range Transponder System Indications

Indication First-Time Alert

Description A tone sounds. The display shows In Range after the channel alias.

ARTS-in-Range Alert

A tone sounds, if programmed. The display shows In Range after the channel alias.

ARTS-Out-of-Range Alert

A tone sounds.
The red LED rapidly blinks.
The display shows Out of Range alternating with the Home screen.

11.4
Bluetooth®
This feature allows your radio to connect to any Bluetooth enabled device through Bluetooth connection.
Your radio supports both Motorola Solutions and Commercially available Off- The-Shelf (COTS) Bluetooth enabled devices. For example, headset, scanner, sensor device, and PTT-Only Device (POD).
The Bluetooth operates within a range of 10 meter (32 feet) line of sight. The Bluetooth function of your radio has a maximum power of 2.5 mW (4 dBm) at the 10 m range.
This is an unobstructed path between your radio and your Bluetooth enabled device. For high degree of reliability, Motorola Solutions recommends to not separate the radio and the Bluetooth enabled device.
If the voice and tone quality gets distorted or unclear, place your radio and the Bluetooth enabled device close to each other to re-establish clear audio reception.
Your radio can support up to three simultaneous Bluetooth connections with Bluetooth-enabled devices of unique types. Your radio connects to the Bluetooth-enabled device within range with either the strongest signal strength or last connected device.
NOTE: Use the latest Bluetooth accessories (v5.0 and above) for enhanced connection security.
Always adopt Bluetooth security best practices when using Bluetooth devices.
11.4.1
Turning the Bluetooth On
Procedure: From the menu, select Bluetooth My Status On.
Result: If Bluetooth is turned on, the display shows a beside On.

MN008365A01-AC Chapter 11: Advanced Features
11.4.2
Turning the Bluetooth Off
Procedure: From the menu, select Bluetooth My Status Off.
Result: If Bluetooth is turned off, the display shows a beside Off.
11.4.3
Connecting to Bluetooth Devices
Procedure: 1. From the menu, select Bluetooth. 2. Perform one of the following actions: To connect to an existing device, select Devices Connect. To connect to a new device, select Devices Find Devices <required device> Connect. To connect to a device in discoverable mode, select Find Me.
Result: If the Bluetooth device is successfully connected to the radio, your radio shows the following indications: A positive tone sounds. The display shows Connected and the Bluetooth Connected icon. If the Bluetooth device is unsuccessfully connected to the radio, your radio shows the following indications: A negative tone sounds. The display shows Connecting Failed.
NOTE: The Bluetooth connection tone is enabled by default. You can disable the Bluetooth connection tone through the radio programming software.
11.4.4
Disconnecting from Bluetooth Devices
Procedure: From the menu, select Bluetooth Devices Disconnect.
Result: If the Bluetooth device is successfully disconnected from the radio, your radio shows the following indications: A tone sounds. The display shows

Disconnected. NOTE: The Bluetooth connection tone is enabled by default. You can disable the Bluetooth connection tone through the radio programming software. 39

MN008365A01-AC Chapter 11: Advanced Features
11.4.5
Switching Audio Route between Internal Radio Speaker and Bluetooth Device
Procedure: Press the programmed Bluetooth Audio Switch button.
Result: When the audio is routed to the Internal Radio Speaker, the display shows Route Audio to Radio. When the audio is routed to the Bluetooth device, the display shows Route Audio to Bluetooth.
11.4.6
Viewing Device Details
Procedure: From the menu, select Bluetooth Devices View Details.
11.4.7
Deleting Device Names
Procedure: From the menu, select Bluetooth Devices Delete.
Result: The display shows Device Deleted.
11.4.8
Adjusting Bluetooth Mic Gain Values
Procedure: 1. From the menu, select Bluetooth BT Mic Gain. 2. To increase or decrease the values, use the Channel Up or Down Menu/OK button.
11.4.9
Permanent Bluetooth Discoverable Mode
The Permanent Bluetooth Discoverable Mode must be enabled by your dealer. NOTE: If the Permanent Bluetooth Discoverable Mode is enabled, you are unable to find the Bluetooth setting in the menu and you cannot use any Bluetooth programmable button features.
Other Bluetooth-enabled devices can locate your radio, but the devices cannot connect to the radio. The Permanent Bluetooth Discoverable Mode enables dedicated devices to use your radio position in the process of Bluetooth-based location.
40

MN008365A01-AC Chapter 11: Advanced Features
11.5
Call Alert Operation
Call Alert paging enables you to alert the recipient to call you back when they can. This feature is applicable for subscriber aliases or IDs only.
11.5.1
Making Call Alerts
Procedure: Press the programmed One Touch Access button.
Result: If the call alert acknowledgment is received, the display shows a positive mini notice. If the call alert acknowledgment is not received, the display shows a negative mini notice.
11.5.2
Responding to Call Alerts
When you receive a Call Alert, your radio shows the following indications: A repetitive tone sounds. The yellow LED blinks. The display shows a notification list of the Call Alert and the ID of the caller.
Procedure: Depending on the configuration by your dealer, perform one of the following actions: Respond to the caller with a Private Call by pressing the PTT button. Continue with Talkgroup communication by pressing the PTT button. To respond to the Call Alert, navigate to the Missed Call log in the Call Log menu.
11.6
Call Indicator Settings
This feature allows you to configure call or text message tones.
11.6.1
Activating or Deactivating Call Ringers
You can activate or deactivate call ringers for Private Calls, Text Messages, Call Alerts, and Selective Calls.
Activating Call Ringers
Procedure: 1. From the menu, select Utilities Radio Settings Tones/Alerts Call Ringers. 2. Select one of the following options: Call Alert
41

MN008365A01-AC Chapter 11: Advanced Features

Private Call Selective Call Messages 3. Select the required tone. Result: If you activate call ringers, your radio display shows a

and the selected tone.

Deactivating Call Ringers
Procedure: 1. From the menu, select Utilities Radio Settings Tones/Alerts Call Ringers. 2. Select one of the following options: Call Alert Private Call Selective Call Messages 3. Select Off.
Result: If you deactivate call ringers, your radio display shows a beside Off.

11.6.2
Assigning Ring Styles
You can program your radio to play one of the 11 predefined ring tones when receiving Private Calls, Call Alerts, or Text Messages.
Procedure:
From the menu, select Contacts View/Edit Ringer

. Result: The display shows Contact Saved.

11.6.3
Selecting Ring Alert Types
Procedure: 1. From the menu, select Utilities Radio Settings Tones/Alerts Ring Alert Type. 2. Select one of the following options: Silent Ring

MN008365A01-AC Chapter 11: Advanced Features
11.6.4
Alarm Tone Volume Escalation
Your radio can be programmed by your dealer to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time. This feature is known as Escalert.
11.7
Call Log Features
Your radio tracks all recent outgoing, answered, and missed Private Calls. The call log feature is used to view and manage recent calls. Missed Call Alerts can be included in call logs depending on the system configuration on your radio. You can perform the following tasks in each call list: View Details Delete Calls
11.7.1
Viewing Recent Calls
Procedure: 1. From the menu, select Call Log. 2. Select one of the following lists: Missed Answered Outgoing 3. View calls by scrolling through the list.
Result: The display shows the most recent entry.
11.7.2
Deleting Calls from the Call List
Procedure: From the menu, select Call Log <required ID or alias> Delete Entry? Yes. NOTE: If you select No, your radio returns to the previous screen. If the list is empty, a tone sounds and the display shows List Empty.
Result: The display shows Entry Deleted.
11.7.3
Viewing Details from the Call List
Procedure: From the menu, select Call Log <required ID or alias> View Details.
43

MN008365A01-AC Chapter 11: Advanced Features
11.8
Contacts Settings
The Contacts menu provides an address book function on your radio. Each entry corresponds to an ID for making calls. The entries are alphabetically sorted. Each entry supports different call types depending on your settings. The contact entries display Call Type, Call Alias, and Call ID information. You can assign entries to programmable number keys as quick dial. You see a check mark before each number key that is assigned to an entry. If the check mark is before the Empty interface, a number key is not assigned to the entry. Personal Computer (PC) Calls and Dispatch Calls are data-related. These calls are only available with an application. Your radio supports Analog and Digital contacts, with a maximum of 500 members for each Contacts Lists. For Analog contacts list, you view or edit the subscriber IDs, and initiate a Call Alert. Only your dealer can add or delete the subscriber IDs. For Digital contacts list, you can add or edit the subscriber IDs. Only your dealer can delete the subscriber IDs. If the Privacy feature is enabled on a channel, you can make privacy-enabled Group Calls, Private Calls, and All Calls on that channel. Only target radios with the same Privacy Key, or the same Key Value and Key ID as your radio will be able to decrypt the transmission.
11.8.1
Making Group Calls or Private Calls with Contact List
Procedure: 1. From the menu, select Contacts . 2. To call, press and hold the PTT button. 3. Wait for the Talk Permit Tone to end, and speak into the microphone. 4. To listen, release the PTT button.
11.8.2
Setting Default Contacts
Procedure: From the menu, select Contacts Set as Default.
Result: If the setting is successful, your radio shows the following indications: A positive indicator tone sounds. The display shows a positive mini notice. The display shows a beside the selected contact.
44

MN008365A01-AC Chapter 11: Advanced Features

11.9
Covert Mode
Your radio is capable of Covert Mode. During covert mode, all keypad and programmed button access are blocked. When enabled, all visual indications (display, LEDs, and backlight) are disabled.
This feature allows audio or tone only by using a wired accessory or a Bluetooth accessory.

11.9.1
Entering or Exiting Covert Mode
Procedure: Press Volume Up and Volume Down button alternately 6 times, in five seconds.

11.10
Emergency Operation
Emergency Alarms are used to indicate critical situations. You can initiate an Emergency Alarm at any time even when there is activity on the current channel.
You can only assign one type of Emergency Mode to the Emergency button for each channel. Your radio supports the following Emergency Modes:

Table 15: Emergency Modes

Emergency Mode Emergency Alarm
Emergency Alarm with Call
Emergency Alarm with Voice to Follow

Description
An Emergency Alarm is not a voice call. This alarm is an emergency notification sent to radios that are programmed to receive them.
Your radio transmits an Emergency Alarm. When the Emergency Alarm is acknowledged, the group of radios can communicate over the assigned emergency channel. Press and hold the PTT button to talk.
Your radio transmits an Emergency Alarm. When the Emergency Alarm is acknowledged, your radio microphone is automatically activated which is known as Hot Mic. Hot Mic allows you to communicate with the group of radios without pressing the PTT button.
NOTE:
If the Emergency Cycle Mode is enabled, repetitions of Hot Mic and receiving period are made for a programmed duration.
If you press and hold the PTT button during the programmed Hot Mic receiving period, your radio proceeds to make a call and stops Hot Mic receiving period timer. Your radio remains in emergency mode. Once PTT button is released, Hot Mic receiving period timer restarts.
If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the Hot Mic directly.

Silent Emergency Alarm

Your radio transmits an emergency notification without any audio or visual indicators.

MN008365A01-AC Chapter 11: Advanced Features

Emergency Mode Silent Emergency Alarm with Call
Silent Emergency Alarm with Voice to Follow

Description
Your radio transmits an emergency notification without any audio or visual indicators. Your radio suppresses all audio and visual indicators of the emergency until you press and hold the PTT button to talk.
Your radio transmits an emergency notification without any audio or visual indicators. When the Emergency Alarm is acknowledged, the Hot Mic is activated. You can communicate with the group of radios without pressing the PTT button.
NOTE: The indicators only appear when you press the PTT button.

Your dealer can set the Emergency On or Off function and button-press duration of the Emergency button. Contact your dealer for more information. Your dealer can program the Emergency Search tone. When the tone is programmed, the Emergency Search tone sounds. The tone mutes when your radio transmits or receives voice, and stops when your radio exits Emergency mode.
11.10.1
Sending Emergency Alarms
Procedure: Press the programmed Emergency On button.
Result: If the alarm is successfully sent, your radio shows the following indications: The Emergency tone sounds. The green LED blinks. The display shows Alarm Sent. If the alarm is unsuccessful after all retries, your radio shows the following indications: A negative tone sounds. The display shows Alarm Failed.
11.10.2
Sending Emergency Alarms with Call
Procedure: 1. Press the programmed Emergency On button.
If the alarm is successfully sent, your radio shows the following indications: The Emergency tone sounds. The green LED blinks. The display shows Alarm Sent.
2. To call, press and hold the PTT button. 3. Wait for the Talk Permit Tone to end, and speak into the microphone. 4. To listen, release the PTT button.

MN008365A01-AC Chapter 11: Advanced Features
If your radio does not detect voice activity for a predetermined period, the call ends.
11.10.3
Sending Emergency Alarms with Voice to Follow
Procedure: 1. Press the programmed Emergency On button. If the alarm is successfully sent, your radio shows the following indications: The green LED blinks. The display shows Tx Alarm and the destination alias. The Emergency icon appears.
2. Speak into the microphone without pressing the PTT button.
Your radio automatically stops transmitting when: The cycling duration between hot mic and receiving calls expires if Emergency Cycle Mode is
enabled. The hot mic duration expires if Emergency Cycle Mode is disabled.
11.10.4
Receiving Emergency Alarms
When you receive an Emergency Alarm, your radio shows the following indications: A tone sounds. The red LED blinks. The display shows the Emergency icon, and the Emergency caller alias or if there is more than one
alarm, all emergency caller aliases are displayed in an Alarm List. Procedure:
1. When the Emergency Alarm List appears, perform one of the following actions: Select OK button. Select the .
2. Select OK button to view the action options.
11.10.5
Reinitiating the Emergency Mode
Procedure: Perform one of the following actions: Change the channel while the radio is in Emergency mode. NOTE: You can reinitiate emergency mode only if you enable emergency alarm on the new channel.
47

MN008365A01-AC Chapter 11: Advanced Features
Press the programmed Emergency On button during an emergency initiation or transmission state. Result: The radio exits the Emergency mode, and reinitiates Emergency.
11.10.6
Exiting the Emergency Mode
Your radio automatically exits emergency mode when you are having the following scenarios: An acknowledgment is received from the system (for emergency alarms only). All retries to send the alarm are exhausted. Turning off your radio. When you turn on your radio, the emergency will not reinitiate automatically. Change your current channel to a channel with no Emergency.
Procedure: Press the programmed Emergency Off button.
Result: If you exited the Emergency successfully, your radio shows the following indications: The tone ceases. The red LED extinguishes.
11.11
Entering the Front Panel Programming
You can customize certain feature parameters in the Front Panel Programming (FPP) to enhance the use of your radio.
Procedure: 1. From the menu, select Utilities Program Radio. 2. Enter your current eight-digit password. 3. Select the required setting.
11.12
Home Channel Reminder
This feature provides a reminder when the radio is not set to the home channel for a while. When this feature is enabled and your radio is not set to the home channel for some time, the following indications occur periodically: A tone and the Home Channel Reminder announcement sounds. The display shows Non Home Channel.
11.12.1
Muting the Home Channel Reminder
When the Home Channel Reminder sounds, you can temporarily mute the reminder.
48

MN008365A01-AC Chapter 11: Advanced Features
Procedure: Press the programmed Silence Home Channel Reminder button.
Result: The display shows HCR Silenced.
11.12.2
Setting New Home Channels
When the Home Channel Reminder occurs, you can set new home channels.
Procedure: From the menu, select Utilities Radio Settings Home Channel

. Result: The display shows a beside the selected home channel alias. 11.13 Indoor Location NOTE: Indoor Location feature is applicable for models with the latest software and hardware. Check with your dealer or system administrator for more information. You can use Indoor Location to keep track of the location of radio users. When Indoor Location is activated, the radio is in a limited discoverable mode. Dedicated beacons are used to locate the radio and determine the position. 11.13.1 Turning the Indoor Location On Procedure: From the menu, select Bluetooth Indoor Location InLoc Status. Result: If Indoor Location successfully turns on, your radio shows the following indications: A positive tone sounds. The display shows Indoor Location On. The Indoor Location Available icon appears on the home screen. If Indoor Location does not turn on, your radio shows the following indications: A negative tone sounds. The display shows Turning On Failed. 11.13.2 Turning the Indoor Location Off Procedure: From the menu, select Bluetooth Indoor Location InLoc Status. Result: If Indoor Location successfully turns off, your radio shows the following indications: 49

MN008365A01-AC Chapter 11: Advanced Features
A positive tone sounds. The display shows Indoor Location Off. The Indoor Location Available icon disappears from the home screen. If Indoor Location does not turn off, your radio shows the following indications: A negative tone sounds. The display shows Turning Off Failed.
11.13.3
Accessing Indoor Location Beacons Information
Procedure: From the menu, select Bluetooth Indoor Location Beacons.
Result: The display shows information of the beacons.
11.14
Lone Worker
This feature prompts an emergency if there is no user activity (button press or channel selector activation) for a predefined time. When there is no user activity for a predefined time, the radio prewarns you using an audio indicator once the inactivity timer expires. If there is no acknowledgment from you before the predefined reminder timer expires, the radio initiates an emergency condition as programmed by the dealer.
11.15
Monitor Feature
The feature allows you to remotely activate the microphone of a target radio. You can use this feature to monitor any audible activity surrounding the target radio.
11.15.1
Monitoring Channels
Procedure: 1. Press and hold the programmed Monitor button. Your radio shows the following indications: You hear the radio activity. The yellow LED illuminates. The display shows the Monitor icon.
2. To call, press and hold the PTT button. 3. To listen, release the PTT button.
50

MN008365A01-AC Chapter 11: Advanced Features

11.15.2
Permanent Monitor
The Permanent Monitor feature is used to continuously monitor a selected channel for activity.

11.15.2.1
Setting the Permanent Monitor
Procedure: Press the programmed Permanent Monitor button.
Result: When your radio enters the mode, your radio shows the following indications: An alert tone sounds. The yellow LED illuminates. The display shows Permanent Monitor On and the Monitor icon. When your radio exits the mode, your radio shows the following indications: An alert tone sounds. The yellow LED extinguishes. The display shows Permanent Monitor Off.

11.16
Remote Monitor
This feature is used to turn on the microphone of a target radio with a subscriber ID. You can use this feature to remotely monitor any audible activity surrounding the target radio.
Both your radio and the target radio must be programmed to allow you to use this feature.
The Remote Monitor microphone selection of the target radio follows the programmed Hot Mic setting. There are two Hot Mic sources:

Hot Mic Source Radio Microphone
Wired Accessory Microphone

Microphone Selection
The Bluetooth microphone is used for Remote Monitor.
If there is no Bluetooth microphone connected, the radio microphone is used.
The wired accessory microphone is used for Remote Monitor.
If there is no wired accessory microphone connected, the Bluetooth microphone is used.
If there is no Bluetooth microphone connected, the radio microphone is used.

If initiated, the green LED blinks once on the target radio. This feature automatically stops after a programmed duration or when there is user operation on the target radio.
Remote Monitor comprises of two types:

MN008365A01-AC Chapter 11: Advanced Features

Remote Monitor without Authentication
Remote Monitor with Authentication
When your radio turns on the microphone of a target radio with user authentication, a passphrase is required. The passphrase is programmed into the target radio through the radio programming softwares.

11.16.1
Initiating the Remote Monitor
Procedure: 1. Perform one of the following actions:

Option
Initiating Remote Monitor with Contact List
Initiating Remote Monitor with Manual Dial

Actions
From the menu, select Contacts Remote Mon..
a. From the menu, select Contacts Manual Dial Radio Number.
b. Either enter the ID or alias, or edit the previous dialed ID. c. Select Remote Mon..

2. Enter the passphrase if required. Result: If the request is successful, your radio shows the following indications: A positive tone sounds. The display shows a positive mini notice. The audio from the monitored radio starts playing for a programmed duration, and the display shows
Rem. Monitor. When the timer expires, an alert tone sounds and the LED turns off.
If the request is unsuccessful, your radio shows the following indications: A negative tone sounds. The display shows a negative mini notice.

11.17
Mute Mode
Mute Mode provides an option to silence all audio indicators on your radio.
When Mute Mode is initiated, all audio indicators are muted except higher priority features such as emergency operations.
When Mute Mode is exited, your radio resumes playing ongoing tones and audio transmissions.
Mute Mode can be enabled for a predefined duration by setting the Mute Mode Timer. The duration of the timer is configured through the radio menu and can range between 0.56 hours. Mute Mode is exited once the timer expires.
If the timer is left at 0, the radio remains in Mute Mode for an indefinite period until the programmed Mute Mode button is pressed.
IMPORTANT: You can only enable either Face Down or Fall Alert one at a time. Both features cannot be enabled together.

MN008365A01-AC Chapter 11: Advanced Features
11.17.1
Turning the Mute Mode On
Procedure: Press the programmed Mute Mode button.
Result: If Mute Mode is enabled, your radio shows the following indications: A positive tone sounds. The red LED blinks and continues blinking until Mute Mode is exited. The display shows Mute Mode On. The home screen shows the Mute Mode icon. Your radio mutes. If the Mute Mode Timer has been set, the timer begins counting down the duration that it is configured.
11.17.2
Setting the Mute Mode Timer
Procedure: 1. From the menu, select Utilities Radio Settings Mute Timer. 2. Edit the numeric value of each digit.
11.17.3
Exiting the Mute Mode
When the Mute Mode Timer expires, your radio automatically exits Mute Mode. You can also exit Mute mode manually.
Procedure: Exit Mute Mode manually by performing one of the following actions: Press the programmed Mute Mode button. Press and hold the PTT button and speak into the microphone. Switch to any unprogrammed channel.
Result: If Mute Mode is disabled, your radio shows the following indications: A negative tone sounds. The blinking red LED extinguishes. The display shows Mute Mode Off. The Mute Mode icon disappears from the home screen. Your radio unmutes and restores the speaker state. The Mute Mode Timer stops even if the timer has not expired.
53

MN008365A01-AC Chapter 11: Advanced Features
11.18
Notification List
Your radio has a Notification list that collects all unread events on the channel, such as text messages, telemetry messages, missed calls, and call alerts. The display shows the Notification icon when the Notification list has one or more events. The list supports a maximum of 40 unread events. When the list is full, the next event automatically replaces the oldest event. After the events are read, they are removed from the Notification list. The maximum number of notifications are 30 text messages and 10 missed calls or call alerts. This maximum number depends on individual feature (job tickets, text messages, missed calls, or call alerts) list capability.
NOTE: Your radio suspends Scan when the Notification list is displayed. Scanning resumes when your radio exits the Notification list. Select Back/Home button or wait for the menu timer to expire to exit the Notification list.
11.18.1
Accessing the Notification List
Procedure: From the menu, select Notification.
Result: The display shows all the available events.
11.19
Over-the-Air Programming
Your dealer can remotely update your radio through Over-the-Air Programming (OTAP) without any physical connection. Some settings can also be configured by using OTAP. When your radio undergoes OTAP, the green LED blinks. When your radio receives high volume data, your radio shows the following indications: If you press the PTT button, a negative tone sounds. The display shows the High Volume Data icon. The channel becomes busy. When OTAP completes, your radio shows one of the following responses depending on the configuration: A tone sounds. The display shows Updating Restarting. Your radio restarts. Your radio displays the Restart Now or Postpone options. If you select Postpone, your radio returns to
the previous screen. The display shows the OTAP Delay Timer icon until the automatic restart occurs. When your radio turns on after automatic restart, your radio shows the following indications: If the program update is successful, the display shows Sw Update Completed. If the program update is unsuccessful, a tone sounds, the red LED blinks once, and the display shows Sw
Update Failed. NOTE: If the programming update is unsuccessful, the update failure indications appear every time you turn on your radio. Contact your dealer to reprogram your radio with the latest software to eliminate the update failure indications.
54

MN008365A01-AC Chapter 11: Advanced Features

11.20
Scan
Depending on the supported system available on your radio, your radio may have different behavior on Scan.

Channel Scan
When you start a scan, your radio scans through the programmed scan list for the current channel looking for voice activity. If you are on a digital channel, and your radio locks onto an analog channel, your radio automatically switches from digital mode to analog mode during the call and the same behavior occurs if you are on analog channel.

Table 16: Scan Methods Method Main Channel Scan (Manual)
Auto Scan (Automatic)

Description
Your radio scans all the channels or groups in your scan list. When scanning, your radio may, depending on the settings, automatically start on the last scanned active channel or group, or on the channel where scan was initiated.
Your radio automatically starts scanning when you select a channel or group that has Auto Scan enabled.

When you miss a call from a talkgroup or a channel that is in your scan list, you might be having the following situations:
Scan feature is not on.
Scan list member has been disabled through the menu.
You are already participating in another call.
NOTE: If your radio joins a call for a Zone Scan List member from a different Zone and Call Hang Timer expires before you are able to respond, you must navigate to the Zone and Channel of the Scan List Member and start a new call to respond.

11.20.1
Turning the Scan On

Procedure: From the menu, select Scan Scan State Turn On.
Result: If scan is turned on, your radio shows the following indications:
The yellow LED blinks.
The display shows Scan On and the scan icon.

11.20.2
Turning the Scan Off

Procedure: From the menu, select Scan Scan State Turn Off.
Result:

MN008365A01-AC Chapter 11: Advanced Features
If scan is turned off, your radio shows the following indications: The LED extinguishes. The display shows Scan Off and the scan icon disappears.
11.20.3
Nuisance Channels
Nuisance Channel is a channel that generates unwanted call continually. You can temporarily remove the unwanted channel from the scan list and restore it back later on. This capability does not apply to the channel designated as the Selected Channel.
11.20.3.1
Deleting Nuisance Channels
Prerequisites: Your radio is scanned into the Nuisance Channel. Procedure:
1. Press the programmed Nuisance Delete button until you hear a tone. 2. Release the programmed Nuisance Delete button.
11.20.3.2
Restoring Nuisance Channels
Procedure: Perform one of the following actions: Restart your radio. Turn off and then turn on the scan. Change the channel using the Channel Rocker.
11.20.4
Vote Scan
Vote Scan provides wide coverage in areas with multiple base stations transmitting identical information on different analog channels. Your radio scans analog channels of multiple base stations, and performs a voting process to select the strongest received signal. During a vote scan, your radio shows the following indications: The yellow LED blinks. The display shows the Vote Scan icon.
56

MN008365A01-AC Chapter 11: Advanced Features
11.20.5
Scan Lists
You can create and assign individual channels or groups in Scan Lists. Your radio scans for voice activity by cycling through the channel or group sequence specified in the scan list for the current channel or group. Scan List also known as Receive Group List. Your radio can support up to 250 scan lists, with a maximum of 16 members in a list. Each scan list supports a mixture of analog and digital entries. The Priority icon on the left of member ID indicates whether the member is on Priority 1 or Priority 2 channel list. You cannot have multiple Priority 1 and Priority 2 channels in a scan list. There is no icon if the priority is set to None.
11.20.5.1
Viewing the Scan List
Procedure: From the menu, select Scan Scan List.
11.20.5.2
Adding New Entries to the Scan List
Procedure: 1. From the menu, select Scan Scan List Add Member <required alias>. 2. Perform one of the following actions: To add another, select Yes. To save the current list, select No.
11.20.5.3
Deleting Entries from the Scan List
Procedure: 1. From the menu, select Scan Scan List Delete. 2. Perform one of the following actions: To delete the alias, select Yes. To return to previous screen, select No.
11.20.5.4
Editing Priority for a Scan List
Procedure: From the menu, select Scan Scan List Edit Priority.
Result: If successful, your radio shows the following indications: A positive tone sounds. Priority icon appears on the left of the member alias.
57

MN008365A01-AC Chapter 11: Advanced Features
11.21
Radio Check
If enabled, this feature allows you to determine if another radio is active in a system without disturbing the user of that radio. No audible or visual notification is shown on the target radio. This feature is only applicable for subscriber IDs.
11.21.1
Sending Radio Checks
Procedure: From the menu, select Contacts Radio Check.
Result: If the target radio is active in the system, your radio shows the following indications: A tone sounds. The display shows Target Radio Available. If the target radio is inactive in the system, your radio shows the following indications: A tone sounds. The display shows Target Radio Not Available.
11.22
Received Signal Strength Indicator
This feature allows you to view the Received Signal Strength Indicator (RSSI) values. The display shows the RSSI icon at the top right corner.
11.22.1
Viewing RSSI Values
Procedure: From the home screen, press Volume Down button five times, then immediately press Volume Up button five times.
11.23
Response Inhibit
This feature helps prevent your radio from responding to any incoming transmissions. NOTE: Contact your dealer for more information.
If enabled, your radio does not generate any outgoing transmissions in respond to incoming transmissions, such as Radio Check, Call Alert, Radio Disable, Remote Monitor, Automatic Registration Service (ARS), and responding to Private Messages. Your radio cannot receive Confirmed Private Calls when this feature is enabled. However, your radio is able to manually send transmission.
58

MN008365A01-AC Chapter 11: Advanced Features
11.23.1
Setting the Response Inhibit
Procedure: Press the programmed Response Inhibit button.
Result: If the Response Inhibit is successfully turned off, your radio shows the following indications: A positive tone sounds. The display shows a momentary positive mini notice. If the Response Inhibit fails to turn off, your radio shows the following indications: A negative tone sounds. The display shows a momentary negative mini notice.
11.24
Rental Timer
The Rental Timer feature allows the radio rental dealer to set the permitted rental period of your radio and automatically disable the radio beyond the duration specified on the timer. The radio can be programmed with a maximum rental period of 999 hours and a maximum rental period extension of 99 hours. The timer calculates the radio usage time and disables the radio when the usage time reaches the predetermined rental period. After the rental period expires, the radio ceases to function until the dealer resets the rental timer.
11.24.1
Accessing Rental Timer Information
Procedure: From the menu, select Utilities Rental Timer Information.
Result: The display shows the hours.
11.24.2
Rental Expiry Reminder
The Rental Expiry Reminder feature provides a reminder when the rental period is expiring. The radio provides a display and an audio reminder of the timer expiry. For the audio reminder frequency, the voice announcement sounds as the followings: Every 1 hour after the first reminder, until the last 2 hours before the rental period expires. Twice for the last 2 hours before the rental period expires. Twice during the last 3 minutes, 2 minutes and 1 minute before the rental period expires. For the display reminder, your radio display shows a momentary notice reminder referring to the number of hours before before the rental period expires. For the last 3 minutes before expiry, your radio display shows a momentary notice reminder referring to the number of minutes before the rental period expires.
59

MN008365A01-AC Chapter 11: Advanced Features

11.24.3
Extending the Rental Period
The radio can be programmed with a maximum of 99 hours rental period extension.
Procedure: Perform one of the following actions:

Options Extending the rental period through the menu
Extending the rental period through the buttons

Actions
a. From the menu, select Utilities Rental Timer Extension.
b. Press the Menu/OK button.
NOTE: You can only extend the rental period once. The extension check box is greyed out after you enable the feature.
Press the Side Button and Volume Down three times continuously.
NOTE: You can only extend the rental period once. A negative indicator tone sounds if you press the buttons again.

11.25
Security
This feature allows you to stun or revive any radio in the system.
For example, you may disable stolen radio to prevent unauthorized users from using and revive or enable the radio when it is recovered.
When a radio is stunned, the radio cannot request nor receive any user initiated services on the system that performed the stun procedure. However, the radio can switch to another system. The radio continues to send GNSS location reports and can be monitored remotely when it was stunned or disabled.
You can stun or revive a radio with or without authentication.
Authenticated Radio Disable is a selling feature and requires verification when you enable or disable a radio. When your radio disables a target radio with user authentication, a passphrase is required. The passphrase is preprogrammed in the target radio through the Customer Programming Software (CPS).
NOTE: Contact your dealer to enable this feature.

11.25.1
Disabling Radios

Procedure: 1. Perform one of the following actions:

Option
Disabling the Radio with Contact List

Actions
From the menu, select Contacts Radio Disable.

MN008365A01-AC Chapter 11: Advanced Features

Option
Disabling the Radio with Manual Dial

Actions
a. From the menu, select Contacts Manual Dial. b. Enter the ID. c. Select Radio Disable.

2. Enter the passphrase if required. Result: If the request is successful, your radio shows the following indications: A positive indicator tone sounds. The display shows a positive mini notice. If the request is unsuccessful, your radio shows the following indications: A negative indicator tone sounds. The display shows a negative mini notice.

11.25.2
Enabling Radios

Procedure: 1. Perform one of the following actions:

Option
Enabling the Radio with Contact List
Enabling the Radio with Manual Dial

Actions From the menu, select Contacts Radio Enable.
a. From the menu, select Contacts Manual Dial. b. Enter the ID. c. Select Radio Enable.

11.26
Text Messaging
Your radio is able to receive data from another radio or a text message application.
There are two types of text messages, Digital Mobile Radio (DMR) Short Text Message and text message. The maximum length of a DMR Short Text Message is 23 characters. The maximum length of a text message

MN008365A01-AC Chapter 11: Advanced Features
is 280 characters, including the subject line. The subject line only appears when you receive messages from e-mail applications.
NOTE: The maximum character length is only applicable for models with the latest software and hardware. For radio models with older software and hardware, the maximum length of a text message is 140 characters. Contact your dealer for more information.
11.26.1
Viewing Text Messages
Procedure: 1. From the menu, select Messages. 2. Perform one of the following actions: Select Inbox . For Sent Text Messages, select Sent Items .
Result: If the Inbox or Sent Items folder is empty: If the Keypad Tone is enabled, a tone sounds. The display shows List Empty. The display shows a subject line if the message is from an email application.
11.26.2
Composing Text Messages
Procedure: 1. From the menu, select Messages Compose. 2. Compose your message. 3. Perform one of the following actions: To save a text message, select Back/Home Save. To discard a text message, select Back/Home Discard. NOTE: If you accidentally select the Back/Home button, you can select Edit to continue composing your text message.
If your text message is saved, you can view and edit your text message in the Draft folder. If your text message is discarded, your text message is deleted.
11.26.3
Sending Text Messages
Prerequisites: Compose your message.
62

MN008365A01-AC Chapter 11: Advanced Features

Procedure: Perform one of the following actions:

Option Sending Sent Text Messages
Sending Quick Text Messages

Actions
From your sent message, select Menu/OK Resend.
1. From the menu, select Messages Quick Text.
2. Perform one of the following actions: Select the .

Resending Text Messages

Select Resend.

Result: If your text message is successfully sent, your radio shows the following indications: A tone sounds. The display shows positive mini notice. If your text message fails to send, the display shows the following options: Resend Forward Edit

11.26.4
Responding to Text Messages
When you receive a text message, your radio displays the following items: The Notification List with the ID or alias of the sender. The Message icon.
NOTE: If you press the PTT button, your radio exits the Text Message alert screen and makes a Private or Group Call to the sender.
Procedure: Perform one of the following actions:

Option
Responding to Text Messages from the Notification List

Actions
Perform one of the following actions: To read the text message, select Read. To read the text message later, select Read
Later. To delete the text message, select Delete. To reply, perform the following actions:
a. Press Menu/OK button twice. b. Select the .

MN008365A01-AC Chapter 11: Advanced Features

Option Responding to Text Messages
Responding to Text Messages with Quick Text

Actions
From the menu, select Messages Inbox Reply.
From the menu, select Messages Inbox Reply Quick Reply.

11.26.5
Forwarding Text Messages
Procedure: 1. From the Resend option screen, select Messages. 2. To forward a Text Message from the Inbox or Sent Item folder, select Forward.
Result: If your text message is successfully forwarded, your radio shows the following indications: A positive tone sounds. The display shows positive mini notice. If your text message fails to forward, the display shows the following indications: A negative tone sounds. The display shows negative mini notice.
11.26.6
Deleting Text Messages
Procedure: 1. From the menu, select Messages. 2. Perform one of the following actions: To delete text messages, select Inbox Menu/OK Delete. To delete all text messages, select Inbox Delete All. To delete sent text messages, select Sent Items Menu/OK Delete. To delete all sent text messages, select Sent Items Delete All.
11.27
Wi-Fi Operation
Wi-Fi® is a registered trademark of Wi-Fi Alliance®. You can set up and connect Wi-Fi network to update your radio firmware, codeplug, language pack, and Voice Announcement. Your radio supports the following Wi-Fi networks. WEP/WPA/WPA2 Personal Wi-Fi network
Uses pre-shared key/password based authentication. Pre-shared key/password can be entered by using the menu or MDM.

MN008365A01-AC Chapter 11: Advanced Features
WPA/WPA Enterprise Wi-Fi network Designed for enterprise networks and requires a RADIUS authentication server. Your radio must be preconfigured with a certificate if certificate-based authentication is deployed and client certificate verification is required. NOTE: Configure your Wi-Fi system according to the latest industry security recommendations or use Enterprise Wi-Fi.
11.27.1
Turning Wi-Fi On or Off
Procedure: From the menu, select WiFi Turn On.
Result: If Wi-Fi is turned on, the display shows Turning On WiFi. If Wi-Fi is enabled and a low capacity battery is used, your radio display an alert screen the following notice: Low Capacity Battery! Tx power restricted to 2 W and Wi- Fi disabled. Use a compatible battery to lift restriction. If Wi-Fi is disabled and a low capacity battery is used, the transmit power is restricted to 2 W. Postrequisites: To lift the restriction and to enable 3 W operation and Wi-Fi, power off the radio and change to a compatible battery such as Lithium-Ion 2300 mAh Battery Pack (PMNN4468_).
11.27.2
Turning Wi-Fi On or Off Using a Designated Radio (Individual Control)
Procedure: 1. From the menu, select Contacts WiFi Control. 2. Perform one of the following actions: To turn on Wi-Fi, select On. To turn off Wi-Fi, select Off.
11.27.3
Connecting to a Network Access Point
When you turn on Wi-Fi, your radio scans and connects to a network access point.
Procedure: 1. From the menu, select WiFi Networks <required Network Access Point> Connect. NOTE: For WPA-Enterprise Wi-Fi, if a network access point is not preconfigured, the Connect option is not available. 2. Perform one of the following actions: For WPA-Personal Wi-Fi, enter the password.
65

MN008365A01-AC Chapter 11: Advanced Features
For WPA-Enterprise Wi-Fi, the WPA is configured using the radio programming softwares.
If the password is correct, your radio automatically connects to the selected network access point. If the password is incorrect, the display shows Authentication Failure, and automatically returns to the previous menu.
Result: If the connection is successful, your radio displays a positive notice and the network access point is automatically saved into your profile list. If the connection is unsuccessful, your radio displays a negative notice screen and returns to the previous menu.
11.27.4
Checking Wi-Fi Connection Status
Procedure: Press the programmed Wi-Fi Status button.
Result: If Wi-Fi connection is turned on and connected to a network, your radio shows the following indications: A voice prompt indicates that Wi-Fi is turned on. The display shows WiFi On, Connected. If Wi-Fi connection is turned on but not connected to any network, your radio shows the following indications: A voice prompt indicating that Wi-Fi is turned on. The display shows WiFi On, Disconnected. If Wi-Fi connection is turned off, your radio shows the following indications: A voice prompt indicating that Wi-Fi is turned off. The display shows WiFi Off.
11.27.5
Viewing Details of Network Access Points
Procedure: From the menu, select WiFi Networks <required Network Access Points> View Details.
Result: For WPA-Personal Wi-Fi networks, your radio shows the following details: For a connected network access point, your radio displays information on:
Service Set Identifier (SSID) Security Mode Media Access Control (MAC) address Internet Protocol (IP) address For a non-connected network access point, your radio displays information on SSID Security Mode
66

MN008365A01-AC Chapter 11: Advanced Features For WPA-Enterprise Wi-Fi networks, your radio shows the following details: For a connected network access point, your radio displays information on SSID Security Mode Identity Extended Authentication Protocol (EAP) Method Phase 2 Authentication Cert Name MAC address IP address Gateway DNS1 DNS2 For a non-connected network access point, your radio displays information on SSID Security Mode Identity EAP Method Phase 2 Authentication Certificate Name
67

MN008365A01-AC Chapter 12: Utilities
Chapter 12
Utilities
This chapter explains the operations of the utility functions available in your radio.
12.1
Talkaround
This feature allows you to continue communicating when your repeater is non- operational, or when your radio is out of range from the repeater but within the talk range of other radios. The talkaround setting is retained even after powering down.
NOTE: This feature is not applicable in Capacity PlusSingle-Site, Capacity PlusMulti-Site, and Citizens Band channels that are in the same frequency.
12.1.1
Toggling Between Repeater and Talkaround Mode
Procedure: 1. From the menu, select Utilities Radio Settings Talkaround. 2. Select the Menu/OK button to toggle between Talkaround or Repeater mode.
Result: When Talkaround mode is enabled, a appears beside Enabled. When Talkaround mode is disabled, the disappears beside Enabled.
12.2
Setting Radio Tones and Alerts
Procedure: 1. From the menu, select Utilities Radio Settings Tones/Alerts. 2. Select one of the following options: All Tones Talk Permit Keypad Tone Power Up Tone Vol.Offset .
Result: A appears beside the setting.
68

MN008365A01-AC Chapter 12: Utilities
12.3
Setting Squelch Levels
You can adjust the squelch level to filter out unwanted calls with low signal strength or channels with noise higher than normal background. Procedure:
1. From the menu, select Utilities Radio Settings Squelch. 2. Perform one of the following actions:
For a normal squelch level, select Normal Squelch. To filter out unwanted calls or background noise, select Tight Squelch.
NOTE: This feature is not applicable in Citizens Band channels that are in the same frequency.
12.4
Setting Power Levels
Procedure: 1. From the menu, select Utilities Radio Settings Power. 2. Perform one of the following actions: To enable communication with radios located at a considerable distance from you, select High. To enable communication with radios in closer proximity, select Low. NOTE: This feature is not applicable in Citizens Band channels that are in the same frequency.
12.5
Adjusting Display Settings
Procedure: 1. From the menu, select Utilities Radio Settings Display. 2. Select one of the following options: Brightness Backlight Timer Menu Timer Intro Screen
12.6
Setting Languages
Procedure: From the menu, select Utilities Radio Settings Languages <required language>.
Result: A appears beside the selected language.
69

MN008365A01-AC Chapter 12: Utilities
12.7
Setting LED Indicators
Procedure: 1. From the menu, select Utilities Radio Settings LED Indicator. 2. Perform one of the following actions: To enable LED Indicator, select Menu/OK button. To disable LED Indicator, select Menu/OK button.
Result: If the LED Indicator is enabled, a appears beside Enabled. If the LED Indicator is disabled, your radio shows the following indications: The disappears beside Enabled. The display backlight and keypad backlight are automatically turned off.
12.8
Password Lock
You can set a password to restrict access to your radio. Each time you turn on your radio, you must enter the password. Your radio supports a four-digit password input. Your radio is unable to receive calls in locked state.
12.8.1
Accessing Radios with Password
Prerequisites: Turn on your radio.
Procedure: 1. Enter your four-digit password. 2. Select the Menu/OK button.
Result: If you enter the password correctly, your radio turns on.
If you enter the password incorrectly, a tone sounds, the yellow LED illuminates, and the display shows Wrong Password.
NOTE: You may repeat the steps to enter the password. You are given three attempts before your radio enters into a locked state for 15 minutes. The display shows Radio Locked. During locked state, your radio responds to inputs from the On/Off/Volume knob and the programmed Backlight button only. If you restart your radio during the locked state, the timer restarts.
70

MN008365A01-AC Chapter 12: Utilities

12.8.2
Unlocking Radios in Locked State

Procedure: To unlock your radio in locked state, perform one of the following actions:

Option Unlocking Radios in Locked State if your radio is turned on
Unlocking Radios in Locked State if your radio is turned off

Actions
a. Wait for 15 minutes. b. Access the radio by following the steps in
Accessing Radios with Password.
a. Turn on your radio. NOTE: Your radio restarts the 15 minutes timer for locked state.
b. Wait for 15 minutes. c. Access the radio by following the steps in
Accessing Radios with Password.

12.8.3
Setting the Password Lock
Procedure: 1. From the menu, select Utilities Radio Settings Passwd Lock

. NOTE: When using this feature for the first time, the display shows New Password Setup to set a new password. You must set a new password before setting the Password Lock feature. 2. Perform one of the following actions: To enable Password Lock, select Turn On. To disable Password Lock, select Turn Off. 12.8.4 Changing Passwords Procedure: 1. From the menu, select Utilities Radio Settings Passwd Lock Change PWD. 2. Enter a new four-digit password. 3. To confirm the new password, re-enter the same four-digit password. Result: If the password is successfully changed, the display shows Password Changed. If the password change is unsuccessful, the display shows Password Do Not Match and returns to the previous menu.

MN008365A01-AC Chapter 12: Utilities
12.9
Voice Announcement
This feature enables the radio to audibly indicate the current Zone or Channel assigned. This audio indicator can be customized per customer requirements.
NOTE: The Voice Announcement feature can only be enabled through CPS. If enabled, the Text-toSpeech feature is automatically disabled.
12.9.1
Setting the Voice Announcement
Procedure: 1. From the menu, select Utilities Radio Settings Voice Announcement. 2. Perform one of the following actions: To enable Voice Announcement, select the Menu/OK button. To disable Voice Announcement, select the Menu/OK button.
Result: If the Voice Announcement is enabled, a appears beside Enabled. If the Voice Announcement is disabled, the disappears beside Enabled.
12.10
Setting the Intelligent Audio
Procedure: 1. From the menu, select Utilities Radio Settings Intelligent Audio. 2. Perform one of the following actions: To enable Intelligent Audio, select On. To disable Intelligent Audio, select Off. NOTE: Your radio automatically adjusts the audio volume to overcome current background noise in the environment. Intelligent audio feature is a receive-only feature. This feature is not applicable during a Bluetooth session.
12.11
Setting the Automatic Call Forwarding
Procedure: 1. From the menu, select Utilities Radio Settings Call Forward. 2. Perform one of the following actions: To enable Call Forwarding, select the Menu/OK button.
72

MN008365A01-AC Chapter 12: Utilities
To disable Call Forwarding, select the Menu/OK button. Result: If the Call Forwarding is enabled, a appears beside On.
12.12
Setting the Microphone Automatic Gain Control
Procedure: 1. From the menu, select Utilities Radio Settings 2. Perform one of the following actions: For Analog Microphone Automatic Gain Control, select Mic AGC-A. For Digital Microphone Automatic Gain Control, select Mic AGC-D. 3. Perform one of the following actions: To enable Mic AGC, select the Menu/OK button. To disable Mic AGC, select the Menu/OK button.
Result: If the Mic AGC is enabled, a appears beside Enabled. If the Mic AGC is disabled, the disappears beside Enabled.
12.13
Setting the Trill Enhancement
Procedure: 1. From the menu, select Utilities Radio Settings Trill Enhance. 2. Perform one of the following actions: To enable Trill Enhancement, select On. To disable Trill Enhancement, select the Off.
12.14
Setting the Acoustic Feedback Suppressor
Procedure: 1. From the menu, select Utilities Radio Settings AF Suppressor. 2. Perform one of the following actions: To enable AF Suppressor, select the Menu/OK button. To disable AF Suppressor, select the Menu/OK button.
73

MN008365A01-AC Chapter 12: Utilities

12.15
Privacy
This feature prevents eavesdropping by unauthorized users on a channel by the use of a software-based scrambling solution. The signaling and user identification portions of a transmission are clear.
Your radio must have privacy enabled on the channel to send a privacy-enabled transmission, although this is not a requirement for receiving a transmission.
Some radio models may not offer Privacy feature, or may have different configuration. Contact your dealer for more information.
NOTE: Only one type of privacy can be assigned at a time.
The following table describes the type of privacy and the settings that appear on your radio.

Table 17: Privacy Types and Settings Type Basic Privacy Enhanced Privacy

Setting Privacy Enhanced Privacy

12.15.1
Setting Privacy
Procedure: 1. From the menu, select Utilities Radio Settings. 2. Depending on the configured type of privacy, select your privacy setting. 3. Perform one of the following actions: To enable Privacy, select the Menu/OK button. To disable Privacy, select the Menu/OK button.
Result: If Privacy is enabled, a appears beside Enabled.
If Privacy is disabled, the disappears beside Enabled.
12.16
Voice Operating Transmission
Voice Operating Transmission (VOX) allows you to initiate hands-free voice- activated calls on a programmed channel. When your VOX-capable accessory detects voice, your radio automatically transmits for a programmed period.
NOTE: This feature is not applicable in Citizen Band channels that are in the same frequency. Contact your dealer or administrator for more information.

MN008365A01-AC Chapter 12: Utilities
12.16.1
Setting the Voice Operating Transmission
Procedure: 1. From the menu, select Utilities Radio Settings VOX 2. Perform one of the following actions: To enable VOX, select On. To disable VOX, select Off.
Result: If VOX is turned on, the display shows a beside On. 12.17
Accessing the Radio Information
Procedure: 1. From the menu, select Utilities Radio Info. 2. To access the radio information, perform one of the following actions: To check on battery information, select Battery Info. To check on your radio ID and alias, select My ID. To check on the firmware and Codeplug versions, select Versions. To check on the latest software update information, select SW Update.
12.18
Viewing Enterprise Wi-Fi Certificate Details
Procedure: From the menu, select Utilities Certificate Menu <required certificate>.
75

MN008365A01-AC Inhalt
Inhalt
Rechtliche Hinweise und Support…………………………………………………………………………..7
Hinweise zu geistigem Eigentum und gesetzlichen Bestimmungen……………………………………………….. 7 Rechtliche Hinweise und Hinweise zur Einhaltung von Rechtsvorschriften…………………………………….. 8
Wichtige Sicherheitsinformationen……………………………………………………………………………………8 Informationen zur Einhaltung gesetzlicher Vorschriften………………………………………………………. 8 Garantie und Service-Support………………………………………………………………………………………………….. 9 Garantie für Akkus und Ladegeräte…………………………………………………………………………………. 9
Produktgarantie…………………………………………………………………………………………………… 9 Akkukapazitätsgarantie………………………………………………………………………………………… 9 Beschränkte Garantie……………………………………………………………………………………………………. 9 KOMMUNIKATIONSPRODUKTE VON MOTOROLA SOLUTIONS……………………………. 9 I. UMFANG UND DAUER DES GARANTIEANSPRUCHS………………………………………… 9 II. ALLGEMEINE GARANTIEBEDINGUNGEN………………………………………………………. 10 III. BUNDESSTAATLICHE GESETZE (NUR FÜR USA):…………………………………………. 10 IV. INANSPRUCHNAHME VON GARANTIELEISTUNGEN…………………………………….. 10 V. HAFTUNGSAUSSCHLUSS…………………………………………………………………………….. 10 VI. PATENT- UND SOFTWAREBESTIMMUNGEN…………………………………………………. 11 VII. ANWENDBARES RECHT…………………………………………………………………………….. 12
Kapitel1:Bitte zuerst lesen………………………………….

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>

Motorola Solutions SL2600 Portable Radio User Guide

SL2600 Portable Radio

Product Information

Specifications:

Product Usage Instructions

Chapter 1: Read Me First

Chapter 2: Introduction

Chapter 3: Radio Care

Chapter 4: Getting Started

Chapter 5: Radio Overview

Chapter 6: System Overview

Chapter 7: Zone and Channel Selections

Chapter 8: Types of Radio Calls

Chapter 9: Phone Calls

FAQ

Q: How do I update the software version of my MOTOTRBO™ SL2600

Q: Can I use the radio in both analog and digital modes?

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Motorola Solutions User Manuals

Related Manuals