Pioneer BDR-XD08TB External Blu-rayDrive User Guide

Pioneer BDR-XD08TB External Blu-rayDrive

Specifications:

• Models: BDR-XD08TB, BDR-XD08TS, BDR-XD08TG
• Class: Class 1 Laser Product
• Laser Classification: Class 3B
• Compliance: EN 50689:2021
• Machine Noise Level: ≤ 70 dB(A)

Product Information

Thank you for purchasing the Pioneer BDR-XD08TB / BDR-XD08TS / BDR-XD08TG. This product contains a Class 1 laser diode classified as Class 3B. Please read all warnings, cautions, and important safety information in the manual before use.

Usage Instructions

Safety Precautions :

• Do not remove any covers or attempt to access the inside of the product.
• Avoid exposure to the laser beam when the product is open.
• Avoid placing containers filled with liquid near the equipment or exposing it to moisture.
• Ensure the socket-outlet is easily accessible for pluggable equipment.

Machine Noise Information :
The highest sound-pressure level is 70 dB(A) or less according to EN ISO 7779.

• Disposal :
  If you need to dispose of this product, do not mix it with general household waste. Follow local regulations for proper disposal and recycling of electronic products.

• Optical Instruments:
  Using optical instruments with this product may increase eye hazard. Exercise caution when using such devices.

FAQ :

• What should I do if I encounter hazardous radiation exposure?
  If you suspect hazardous radiation exposure, cease use immediately and seek qualified service personnel for assistance.

• Can I clean the inside of the product myself?
  No, do not attempt to clean the inside of the product. Refer all servicing to qualified personnel to ensure safety.

• How can I ensure proper disposal of the product?
  Follow local regulations for electronic waste disposal. Do not mix this product with general household waste.

USB 3.2 Gen1 (USB Type-C®) / 2.0 Slim Portable BD/DVD/CD Writer
Graveur de BD/DVD/CD portable mince USB 3.2 Gen1 (USB Type-C) / 2.0 Kompakter tragbarer BD/DVD/CD-Brenner mit USB 3.2 Gen1 (USB Type-C) / 2.0

• BDR-XD08TB
• BDR-XD08TS
• BDR-XD08TG

Quick Start Guide

• Thank you for purchasing this Pioneer product. Before using the drive, please ensure that you read all warnings, cautions, notices, and other important safety information in this document, which also contains important information including regulatory data, the software license agreement, details on product registration, service procedures, and guidelines on installation and use. Be sure to keep this manual in a safe place.
• Refer to the inside back cover for the product information URL.

product is handled incorrectly.
| This symbol is used to call attention to precautions that should be taken in order to use the product safely, and to points that should be taken note of in order to maintain the product’s performance.

WARNING

• This product’s classification has been determined under IEC 60825-1:2014, Safety of Laser Products. This Class 1 product contains a laser diode classified as Class 3B. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
• CLASS 1 LASER PRODUCT

The following caution label appears on your unit: Location: bottom of the unit

• WARNING CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, AVOID EXPOSURE TO THE BEAM.

• This product complies with EN 50689 as a

• CONSUMER LASER PRODUCT

• 50689:2021Consumer Laser Product

• For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible.

• WARNING
  TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

• WARNING
  THIS PRODUCT IS NOT WATER RESISTANT. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

• Machine Noise Information Regulation 3.

• GPSGV : The highest sound-pressure level is 70 dB(A) or less in accordance EN ISO 7779.

• CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES  OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

• CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

• If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

• Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).

• For countries not mentioned above, please contact your local authorities for the correct method of disposal.

• By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Information to User
Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

• Region codes
  The region code for the drive can be set only five times (including the initial setting). The region code selected with the fifth setting will be locked as the final region code. Accordingly, take care when changing this code.

• DVD discs that do not have a region code set can be played on all players.

Precautions Regarding Use

• Pioneer accepts no liability for the loss of any data or any other direct or indirect damage suffered as the result of the use or breakdown of this product. It is strongly recommended to regularly back up all critical data.
• Care must be taken not to infringe copyright restrictions under the laws of each country. If this device is used to record copyrighted materials, approval must be obtained from the respective copyright holders. The recording of copyrighted materials without the express approval of the respective copyright holders may result in legal penalties. YOU ARE RESPONSIBLE FOR YOUR USE OF THIS PRODUCT. Pioneer disclaims any and all responsibility for any legal damages resulting from the use of this device in the unauthorized copying of copyrighted materials.

AFTER-SALES SERVICE FOR PIONEER PRODUCTS

• Please contact the dealer or distributor from where you purchased the product for its after-sales service (including warranty conditions) or any other information. If the necessary information is not available, please contact Pioneer below:
• PLEASE DO NOT SHIP YOUR PRODUCT DIRECTLY TO PIONEER for repair without advance contact.
• AUSTRALIA PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
• Door 1, Unit 13, 153-155 Rooks Road, Vermont, VIC 3133, Australia

OTHER REGIONS

• https://www.pioneer.com.au/contact-us/
• PIONEER CORPORATION
  28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan

Trademarks and registered trademarks

• Pioneer and the Pioneer logo are registered trademarks of Pioneer Corporation.
• Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
• OS X El Capitan 10.11, macOS Sierra 10.12, macOS High Sierra 10.13, macOS Mojave 10.14, macOS Catalina 10.15, macOS Big Sur 11, macOS Monterey 12, macOS Ventura 13, macOS Sonoma 14 are trademarks of Apple Inc., registered in the U.S. and other countries.
• M-DISC is a trademark of Millenniata, Inc.
• BLU-RAY DISC, the Blu-ray Disc logo, BDXL and the BDXL logo are trademarks of the Blu-ray Disc Association.
• CyberLink is a trademark or a registered trademark of CyberLink Corporation.
• USB Type-C is a registered trademark of USB Implementers Forum.
•  All names of corporations, products, and systems listed herein, even when the (™) or (®) symbols are omitted, are considered the registered trademarks of the respective owners.

Operating System

Operating Environment (Windows®)

• DVD/CD disc recording and playback
• Supported OS: Windows 11, Windows 10, Windows 8.1

Blu-ray disc recording and playback

• Supported OS: Windows 11, Windows 10, Windows 8.1
• The required operating environment may differ depending on the OS or applications used.
• Please consult with software or OS providers regarding any questions about the OS or applications.

Operating Environment (macOS)

• Supported OS: OS X El Capitan 10.11, macOS Sierra 10.12, macOS High Sierra 10.13, macOS Mojave 10.14, macOS Catalina 10.15, macOS Big Sur 11, macOS Monterey 12, macOS Ventura 13, macOS Sonoma 14

Before Use

• Checking accessories

  • Quick Start Guide (including application product key)
  • USB cable (Type-A)
  • USB Type-C conversion cable (Type-A → Type-C)

• Download the application software from the website at

  • https://jpn.pioneer/cyberlink_soft/en.php
    The application download key (Product Key) is attached to the back of the Quick Start Guide included with the product.

• If any accessories are not included, please contact the dealer from which you purchased this product.

• Please download the Pioneer BD Drive Utility from the Pioneer website.

  • https://pioneer.jp/device_e/product-e/ibs/device_e/dev00001r_e.html#DriveUtility

• The Drive Utility lets the user configure various drive functions such as adjusting the reading method if correct reading of a music CD is not possible, and setting the PureRead function, which minimizes the occurrence of data interpolation resulting from errors.

• To perform high-speed writing, please use media that supports high-speed recording and writing. Refer to the Pioneer website for details.

  • https://pioneer.jp/device_e/product-e/ibs/device_e/dev00003r_e.html

Playback of recorded BD/DVD/CD discs

• Playback of recorded BD/DVD/CD discs is possible in drives and players that support these formats.
• Please consult with the respective product manufacturer regarding compatibility.

Dual Disc playback

• When inserting a Dual Disc into a playback device or removing it from the device, the surface opposite to the playback side may be scratched. Problems may occur when playing the scratched side.
• The audio side (non-DVD side) is not compliant with general physical CD standards, and may not play in some cases.

IMPORTANT SAFETY INSTRUCTIONS

WARNING
Measures in the event of abnormalities

• CONTINUING TO USE THE DEVICE UNDER ABNORMAL CONDITIONS, SUCH AS WHERE THERE IS SMOKE, ABNORMAL SMELLS, STRANGE NOISES, OR SIMILAR MAY LEAD TO FIRE OR ELECTRIC SHOCK. IMMEDIATELY REMOVE THE USB CABLE FROM THE DEVICE. ENSURE THAT NO MORE SMOKE IS BEING EMITTED, AND CONTACT YOUR DEALER FOR REPAIR. ATTEMPTING TO REPAIR THE DEVICE YOURSELF IS DANGEROUS, AND SHOULD NOT BE ATTEMPTED.
• If water or other foreign matter have entered the device, remove the USB cable from the device and contact your dealer. Continuing to use the device may lead to fire or electric shock.
• If the device is dropped or the cover damaged, remove the USB cable from the device and contact your dealer. Continuing to use the device may lead to fire or electric shock.

Operating Environment

• Operating environment temperature and humidity: + 5 °C to +35 °C; less than 85% relative humidity (ensure cooling vents not blocked)
  Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).

• Ensure that water does not enter the device, and that it is kept dry. Do not use in locations with high humidity. Doing so may lead to fire or electric shock.

• Do not use in wet locations such as in bathrooms or shower rooms. Doing so may lead to fire or electric shock.

Installation

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Slots and openings in the chassis are for cooling and proper operation of the unit. Do NOT block or cover the openings. Do NOT place this unit on a bed, rug, etc. as this can block the openings. This unit should not be placed in a built-in installation unless properly ventilated.
• To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on or anywhere near the equipment.
• Do not place near open flames, such as a fireplace, or heat sources. Doing so may lead to fire or deforming.

WARNING

• Unplug the USB cable from this device during lightning storms or when unused for long periods of time.
• During operation, do not subject the device to vibration or shock, or plug in or unplug the USB cable.
• During operation, do not move or pick up the device. The disc rotates at high speed, and picking up or moving the device may damage the disc. To move the device, first remove the disc, and turn the power off.
• Do not remove the device cover, or modify the device. The interior of the device contains high-voltage parts, and doing so may lead to fire or electric shock. Ask your dealer to carry out any internal inspections, maintenance, and repairs. This device is a precision instrument, so refer this product to an authorized dealer or service center if disassembly is required.
• Do not place any objects on this device, which may damage it or cause it to become unstable and fall over or fall off, potentially leading to injury.
• Do not use discs that are cracked, deformed, or have been repaired with glue or other adhesives. Discs rotate at high speed within the device, and in these cases may fly out and lead to injury or damage.
• DO NOT LOOK INTO THE INTERIOR OF THE DEVICE FROM GAPS IN THE TOP COVER. LIGHT FROM LASERS MAY CAUSE VISUAL IMPAIRMENT TO EYES.
• Avoid operating or locating this drive near water or other sources of fluid.
• Do not place this product on an unstable cart, stand, or table. The product may fall and become seriously damaged.
• When using this device, ensure that you adhere to the displayed warnings and cautions from your PC manufacturer.

WARNING
Ensure you abide by the following precautions, as failure to do so may lead to fire or electric shock.

• Connect cables to the device only after checking that the cables have not deteriorated and are not damaged. Do not use any cables that have deteriorated or are damaged.
• Do not disassemble or modify the device. Do not allow metal, flammable objects, chemicals, water or other foreign matter to enter the device.
• Ensure that water does not enter the device, and that it is kept dry.
• Ensure it is used with the specified power supply voltage.

WARNING

• Do not place any objects on the USB cable. Doing so may lead to damage to the cable, which can result in fire or electric shock.
• When unplugging the USB cable, do not pull on the cable. Doing so may lead to damage to the cable, which can result in fire or electric shock. Ensure that you hold the plug when unplugging.
• Do not plug in or unplug the USB cable with wet hands. Doing so may lead to electric shock.

In the following circumstances, turn off the device power, unplug the PC, and contact your dealer or Pioneer.

• If the device smokes, or abnormalities such as strange smells or noises are observed.
• If water or foreign objects have entered the device.
• If the device has been dropped or the power cord, plug, or chassis is damaged.
• The indicator symbols used for this product (including accessories) indicate the following:
  • AC (Alternating Current)
  • DC (Direct Current)

Cautions in Usage

• Do not use in dusty locations, or in locations with high temperature or humidity.
• Do not subject the device to vibration or shock.
• During operation, do not move or pick up the device.
• Beware of condensation. If there is condensation, leave the device for one to two hours for the moisture to evaporate before use.
• Do not inspect or modify the interior of the device.
• Use a soft, dry cloth to wipe any soiling from the exterior of the device. In the case of significant soiling, dilute a neutral cleaner five to six times in water and use this to moisten a soft cloth, wipe the soiling away, then dry with a dry cloth. Do not use volatile chemicals including benzene, thinners, alcohol, or aerosol sprays, as these may damage the surface. Before using chemically treated cloth intended for the care of electronics, carefully read the cautions included with the cloths.
• There are no guarantees regarding data if data is lost while using this device. Ensure you make regular backups of your data for recovery in the case of malfunctions.

Handling discs

• Do not touch or scratch the signal (shiny) side of the disc.

• Hold the disc either by both edges, or by the center hole and one edge.

• Do not apply stickers or labels to the disc.

• Do not use cracked or significantly warped discs. Doing so may lead to a malfunction in the device.

• When using old or rental discs, check that there are no cracks around the center hole. Centrifugal force from high-speed rotation may enlarge these cracks, causing the disc to break.

• Do not use discs with special shapes (heart-shaped, hexagonal, etc.) or other non-standard discs. Doing so may lead to a malfunction.

• If there is dust or fingerprints on the disc, use a soft cloth to wipe outwards from the center to the outer edge of the disc. Do not wipe using a circular motion on the disc.

• Do not use record spray or antistatic agents. Doing so may damage the disc.
  

• To protect the disc, ensure it is kept in a disc case, and check for soiling or dust on the recording surface before use.

Features

Write speed / Read speed

When using a USB 2.0 port, BD writing/reading speed will not achieve 6X.

Part Names and Functions

1. Power/Busy Indicator

   • Operation status is indicated as follows: During Power ON: Lights dimly
   • During reading/writing: Lights
   • During disc cover open/close: Lights dimly

2. OPEN Button

   • Press to open the disc cover.
   • When this device is connected to a Mac with a disc inserted, this function cannot be used due to macOS specifications. Please check the macOS User Guide for how to operate with a Mac.
   • PureRead mode display function
   • Press and hold the [OPEN] button to see the set PureRead mode. Refer to page 23 for details.

3. Disc Cover

   • Press the [OPEN] button to open the disc cover then place only a BD, DVD or CD disc onto the tray with the label facing up. Close the disc cover gently.
   • Do not manually force open the disc cover.
   • Use the Forced Open Lever (see below) to open the disc cover during POWER OFF.
   • WARNING
     Take care not to let your hand or fingers become pinched by the cover.

4. USB 3.2 Gen1 & USB 2.0 Type-C Connector

5. DC IN (AC Adapter Connector)

6. Forced Open Lever
   Use to open the disc cover when the drive is not powered. If the disc cover fails to open when the [OPEN] button is pressed, turn the power to the drive OFF and wait approximately one minute until the disc stops spinning before trying to open the disc cover. During normal operation, the [OPEN] button should be used to open the disc cover.

WARNING
To prevent injury and damage to the unit, do NOT force the disc cover to open while the disc is spinning.

Operations

The unit writes to discs when the supplied software application is installed on your PC. Writing fails if the PC or operating system does not support the software.
Begin writing to disc

1. Connect the supplied USB cable.
2. Turn on the PC.
3. Press the [OPEN] button, and gently lift the disc cover by hand.
4. When this device is connected to a Mac with a disc inserted, this function cannot be used due to macOS specifications. Please check the macOS User Guide for how to operate with a Mac.
5. Place the disc in the tray with the label facing up. 5 Close the disc cover gently.
6. Start the disc burning application.

End the writing session

1. Quit the disc burning application.

2. Press the [OPEN] button, and gently lift the disc cover by hand.
   When this device is connected to a Mac with a disc inserted, this function cannot be used due to macOS specifications. Please check the macOS User Guide for how to operate with a Mac.

3. Remove the disc.

4. Close the disc cover gently.

5. Shut down the PC.
   When the lock mechanism is released, the disc cover needs to be fully opened in order to close again.

Manual disc cover open

Use the Forced Open Lever to remove discs if the disc cover fails to open and all other methods have been exhausted.

1. Shut down the PC.
2. Wait for the disc to stop spinning.
3. Slide the Forced Open Lever to open the disc cover.
4. Gently open the disc cover and remove the disc.
   WARNING
   To prevent injury and damage to the unit, do NOT force the disc cover to open while the disc is spinning.

Connection

This unit can be added without shutting down or rebooting the computer. Connect the unit to the supplied USB cable.

1. Confirm that your computer (PC) has an available USB port.
2. With your Windows® or Mac operating system running, use the supplied USB cable to connect this unit to the PC.

Caution

• Do not disconnect the USB cable during data transfers.
• Do not disconnect the USB cable during PC startup or any operation with the unit.

Note

•  Connection to a USB 3.0 port is recommended, since when a USB 3.0 cable is connected to a USB 2.0 port, the connection will be limited to USB 2.0 performance standards.
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB hub or using unspecified cables may not achieve proper operation.
• Removal procedure
  Check that the status shows that the main unit is not being accessed (the indicator LED is not lit brightly), then remove the USB cable.

CAUTION
This product satisfies EMC regulations when the accessory’s cables are used to connect the unit to other equipment. To prevent electromagnetic interference with electrical appliances such as radios and televisions, please use accessories when connecting.

Downloading and Installing CyberLink Media Suite (with Product Key)
CyberLink® Media Suite is compatible with Windows® OS only. It cannot be used with macOS.

1. Visit the website shown on the final page of this manual.
2. Review the License Agreement, and click “Agree” to proceed to the CyberLink webpage.

Download

1. After accessing the download website, sign in with your CyberLink member e-mail address and password. (If you have not registered as a CyberLink member, click “Register now” and register to be a member.)

2. After signing in, the product key input screen will be displayed. Enter the provided product key and click “Submit”.
   The product key is on the back of the Quick Start Guide.(The 16-character key printed on the label.)

3. If the product key has been entered correctly, the screen to download the downloader will be displayed. Click the download link to download the downloader.
   Re-downloading the downloader
   After registering the product key on the download website, an e-mail will be sent to your registered CyberLink member e-mail address.
   The downloader can be re-downloaded from the Link in the e-mail for 30 days from registration of the product key.

Installation

1. Connect the drive to Windows PC.

2. Run the downloaded file to start downloading the program.

3. After the download is complete, the installation message will be displayed in the dialog box. Click “Install” to start up the installer.
   (Even if you do not click “Install”, the installer will automatically start up after 1 minute.)

4. After the installer starts up, follow the instructions on the installer to install the product.

Useful Functions

• These functions can be used if the Drive Utility is downloaded and installed. For details on other functions in the Drive Utility, refer to the drive utility help page. Please download the Drive Utility from the Pioneer website.
• https://pioneer.jp/device_e/product-e/ibs/device_e/dev00001r_e.html#DriveUtility

Custom Eco function

• Explanation of function
  If the drive does not receive any commands (instructions for operation) from the PC for a specified period, this function will reduce the device’s power consumption (enter the power saving mode), such as by stopping the disc from rotating or reducing the disc rotation speed. Shortening this specified period will make the device enter the power saving mode earlier.

• If a command is received after entering the power saving mode, the device will require some time to bring the disc back up to high-speed rotation, which means a reduced speed of operation in the interim.

• Using this function
  Configure the setting in the “Pioneer BD Drive Utility.”

  1. Install the “Pioneer BD Drive Utility.”
  2. Start the “Pioneer BD Drive Utility.”
  3. Click the [Utility] tab.

• Slide the   under [Custom Eco] to the [Power Save] side.
  There are 10 levels between the standard mode and power saving mode.

• Select [Save setting to the drive]. The set values will be saved to the drive. Settings will be retained even after turning off the device power.

Cautions in usage

• The default setting is standard mode.
• If power to the drive is turned off without selecting the [Save setting to the drive] checkbox, the settings will revert to the previously saved settings.
• In a Windows® environment, the setting can be changed at any time using the Pioneer BD Drive Utility, when the drive is recognized.
• Custom Eco settings can only be changed in Windows. After changing the settings in Windows, the device can be used with a Mac.

Pure Read

Explanation of PureRead function
When using this device to read a music CD, you can use PureRead. This function allows the device to work to acquire and reproduce the original sound as much as possible such as by repeatedly reading scratched or soiled parts of the CD. PureRead can be set to the following two modes or turned off.

Master Mode (default setting)| This mode works to acquire and reproduce the original sound as much as possible, but if it encounters audio data that cannot be completely reproduced, it interpolates that data and continues with acquisition.
---|---
Perfect Mode| This mode reproduces the original sound, and if it encounters audio data that cannot be completely reproduced, it stops and halts acquisition.
OFF| This mode carries out normal acquisition of music CD data. If there is a scratch that prevents reading, interpolation will occur.

What is interpolation?
Audio data that cannot be read because of scratches or other damage is created by inference from sounds before and after it. This sound will be degraded compared to the original sound.

Using PureRead
[Windows®]

1. Install the “Pioneer BD Drive Utility.”
2. Start the “Pioneer BD Drive Utility.”
3. Click the [Setting2] tab.
4. Select the [On] checkbox under [PureRead3+].
5. Select from either [Perfect Mode] or [Master Mode]. 6 Select [Save setting to the drive].
   The set values will be saved to the drive. Settings will be retained even after turning off the device power.

[Mac]

1. Install “Pioneer BD Drive Utility” (macOS 10.14 or earlier) or “Pioneer BD Drive Utility Lite” (macOS 10.15 or later).

2. Start “Pioneer BD Drive Utility “or ” Pioneer BD Drive Utility Lite.”
   When using “Pioneer BD Drive Utility Lite,” operate without a disc inserted.

3. Select the [On] checkbox under [PureRead].

4. Select from either [Perfect Mode] or [Master Mode]. 5 Select [Save setting to drive].
   The set values will be saved to the drive. Settings will be retained even after turning off the device power.

Displaying PureRead mode
With no disc inserted, press and hold the open button for at least two seconds. The busy indicator flashes, and the current PureRead mode setting is displayed.
Mode display

Cautions in usage

• The PureRead mode display function cannot be used while a disc is inserted in the device and the cover is closed.
• If power to the drive is turned off without selecting the [Save setting to the drive] checkbox, the settings will revert to the previously saved settings.
• Changing PureRead with the Drive Utility while using the PureRead mode display function causes the display to be incorrect.

Specifications

[Installation] The device can only be installed horizontally.

[Disc size]

• 12 cm / 8 cm
• Drive does not support 8 cm adapter.

[Transfer rate]

• Data reading (sustained)
• BD Max. 27.00 MB/s DVD Max. 10.80 MB/s CD Max. 3.60 MB/s

Data writing (sustained)

• BD Max. 27.00 MB/s (6X BD-R) DVD Max. 10.80 MB/s (8X BD-R)
• CD Max. 3.60 MB/s (24X BD-R)
• • The transfer rate may be reduced depending on the condition (scratches, etc.) of the disc.

[Access time/Seek time]

• Access time (random average)
• BD-ROM 270 ms DVD-ROM 270 ms CD-ROM 270 ms
• Seek time (random average)
• BD-ROM 250 ms DVD-ROM 250 ms CD-ROM 250 ms

Others

• Power supply………………………………………………………………………………………………………… 5 V DC, 1.0 A
• External dimensions (excluding foot pad)…………………………… 133 mm (W) x 14.8 mm (H) x 133 mm (D)
• Weight (Drive only)…………………………………………………………………………………………………………….230 g
• Operating temperature (Normal humidity)……………………………………………………………….+5 °C to +35 °C
• Operating humidity…………………………………………………………………………5 % to 85 % (no condensation)
• Storage temperature (Normal humidity)……………………………………………………………….. -40 °C to +60 °C
• Storage humidity……………………………………………………………………………5 % to 90 % (no condensation)
• Buffer size………………………………………………………………………………………………………………………… 4 MB
• Power (Standby)…………………………………………………………………………………………………………….. 0.65 W

[Accessories]

• Quick Start Guide (including application product key)
• USB cable (Type-A)
• USB Type-C conversion cable (Type-A → Type-C)
• Specifications and the external appearance may be subject to change without notice.
• Images used in this document may be different from actual product

Problems and Solutions

• Unexpected errors in operation are often thought to be malfunctions. If you think there is a malfunction, check the items below according to the symptoms.
• If the abnormality is not resolved even after taking the following measures, please contact your dealer or Pioneer.
• Additionally, please consult with the application software manufacturer regarding any problems occurring in the application software.
• The computer or application does not correctly recognize the device
• Is the USB cable connected correctly?
  • Make sure the cable is connected correctly. If you are using a USB hub, the power supply may  be insufficient. Connect the USB cable directly to your computer.
• Is the OS compatible with the device?
  • Use an OS that supports this device. (Windows® 11, Windows 10, Windows 8.1, OS X El
• Capitan 10.11, macOS Sierra 10.12, macOS High Sierra 10.13, macOS Mojave 10.14, macOS Catalina 10.15, macOS Big Sur 11, macOS Monterey 12, macOS Ventura 13, macOS Sonoma 14)
• Are you using the supplied application?
  • Use the application included with this device.

Data cannot be recorded/Error occurs during recording

• Is there sufficient space for recording?
• Check that the required application software is installed in the usage environment.
• Check that the operating environment being used meets the specifications for the application software being used.
• Recording on the disc at the selected speed is not possible.
  • Check that the disc supports the different recording speeds.
  • The speed may drop depending on the condition of the disc.
• Are you using a disc that has been finalized (no more recording is possible)?
• Is the disc correctly inserted with the label side facing up and the recording side facing down?
• Is the disc dirty or scratched?

A recorded disc cannot be read

• Is the disc inserted into the disc tray with the label side facing up?
• Are you using a blank disc?
• Is the disc dirty or scratched?
• Check that the required application software is installed in the usage environment.
• Is the device installed in a flat location?
• The optical components or disc may have condensation on them. Therefore, turn the device power off for a period of time and wait for it to fully dry before usage.
• For other details on how to record on discs, refer to the manual or help screens for the application software being used.
• For more stable disc recording and playback
• The operating temperature range for this product is +5 °C to +35 °C. However, recording and playback at normal temperatures is recommended in order to ensure stable recording as well as playback on various players and drives.

There are no images. There is no sound.

• Digital output of BD-Video content (output using DVI or HDMI terminals) requires graphics functionality and monitors that support HDCP standards.
• Check that your PC environment supports HDCP standards.
• Playback of BD-Video content and other high-definition videos requires very high processing power. If you encounter phenomena such as frame dropping or choppy audio, it may be possible to prevent this by reducing the load on the PC, either by stopping resident software or using video playback support functionality in the graphics function.
• Review the operating environment, and try playback again with as little load on the PC as possible from other applications.
• Playback of BD-Video content requires periodic updates to the playback software, as the content decryption key has an expiration date. Before playback, ensure that the latest update from the software manufacturer has been applied.
• During DVD-Video title playback, if the playback software counter is counting correctly and audio is output, but no images are displayed, check the resolution and number of colors of your monitor.
• The standard settings are 800 x 600 resolution and 16-bit color. Additionally, check that the video card (video chip) drivers are the latest versions, and update if necessary.
• If a message such as “Failed to create overlay” is displayed, this indicates insufficient video card performance as above, so set the resolution and number of colors as above.
• Furthermore, if your PC has a TV output function, an error message starting with “Macrovision . . .” may be displayed. In these cases, turn off the TV output function.
• If images are displayed but no audio is output, the video may be being output in an audio format not supported by your playback software. Check the audio format recorded with the BD/DVD-Video title, and switch to a supported audio format (surround sound, etc.).
• Media and files such as videos from BD/DVD-Video and digital broadcasting include content protection, and have restrictions on copying and playback. Check that there are no restrictions on the content to be played and on the playback environment.

Information on the product

• Australia
• https://www.pioneer.com.au/shop/car/bdr-xd08tb/

• Access CyberLink Support Center about the question included application software
  • https://www.cyberlink.com/support/index.html
• Website for downloading application
  • https://jpn.pioneer/cyberlink_soft/en.php
    The downloader can be re-downloaded from the Link in the e-mail sent from CyberLink for 30 days from registration of the product key.

© 2024 PIONEER CORPORATION. All rights reserved.
PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan  PIONEER EUROPE NV (authorised representative)

• Salamanca, Wellington Street, Slough, SL1 1YP, UK
• PIONEER ELECTRONICS AUSTRALIA PTY.LTD.
• Door 1, Unit 13, 153-155 Rooks Road, Vermont, VIC 3133, Australia
• PIONEER DIGITAL DESIGN AND MANUFACTURING CORPORATION
• 5-5, Koishikawa 5-chome, Bunkyo-ku, Tokyo 112-0002, Japan

Printed in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>