sys com tec SCT-HDBTL522 40m for 4K and 70m for 1080P Ultra Slim HDBase-T Extender User Manual
- July 27, 2024
- sys com tec
Table of Contents
SCT-HDBTL522 40m for 4K and 70m for 1080P Ultra Slim HDBase-T Extender
“`html
Specifications:
- Model: SCT-HDBTL522
- Transmission Distance: 40m for 4K, 70m for 1080P
- Type: Ultra-slim HDBase-T Extender
Product Usage Instructions:
Safety Precautions:
To ensure the best performance and safety, please adhere to the
following safety precautions:
-
Read all instructions carefully before using the device.
-
Do not dismantle or modify the device.
-
Use only supplies or parts meeting the product’s
specifications. -
Avoid exposing the unit to rain or moisture.
-
Ensure proper ventilation during installation.
-
Avoid contact with liquids and unplug immediately if spillage
occurs. -
Avoid twisting or pulling the cable forcefully.
-
Unplug the power cord when not in use for an extended
period.
Installation:
Follow these steps for proper installation:
-
Unpack the equipment carefully and keep the original packaging
for future use. -
Ensure the device is placed in a well-ventilated area to
prevent overheating. -
Avoid placing heavy items on the extension cable to prevent
damage.
Product Features:
- HDMI signal extension up to 70m for 1080P and 40m for 4K.
- Supports bi-directional PoC, IR, and RS232 pass-through.
- Compatible with Cat 6A/7 cables.
Frequently Asked Questions (FAQ):
Q: What is the maximum transmission distance for this HDBase-T
extender?
A: The maximum transmission distance is 70m for 1080P signals
and 40m for 4K signals.
Q: Does this extender support bi-directional IR and RS232
pass-through?
A: Yes, this extender supports bi-directional IR and RS232
pass-through in addition to PoC.
“`
SCT-HDBTL522
40m for 4K & 70m for 1080P Ultra-slim HDBase-T Extender
User Manual
All Rights Reserved Version: SCT-HDBTL522_2024 V1.0.0
4K HDBase-T Extender
Preface
Read this user manual carefully before using the product. Pictures shown in
this manual are for reference only. Different models and specifications are
subject to real product. This manual is only for operation instruction, please
contact the local distributor for maintenance assistance. The functions
described in this version were updated till May, 2024. In the constant effort
to improve the product, we reserve the right to make functions or parameters
changes without notice or obligation. Please refer to the dealers for the
latest details.
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully
before using the device. Save this manual for further reference. Unpack the
equipment carefully and save the original box and packing material for
possible future shipment. Follow basic safety precautions to reduce the risk
of fire, electrical shock and injury
to persons. Do not dismantle the housing or modify the module. It may result
in electrical shock
or burn. Using supplies or parts not meeting the products’ specifications may
cause damage,
deterioration or malfunction. Refer all servicing to qualified service
personnel. To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install
this product near water. Do not put any heavy items on the extension cable in
case of extrusion. Do not remove the housing of the device as opening or
removing housing may
expose you to dangerous voltage or other hazards. Install the device in a
place with fine ventilation to avoid damage caused by
overheat. Keep the module away from liquids. Spillage into the housing may
result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module
immediately. Do not twist or pull by force ends of the cable. It can cause
malfunction. Do not use liquid or aerosol cleaners to clean this unit. Always
unplug the power to
the device before cleaning. Unplug the power cord when left unused for a long
period of time. Information on disposal for scrapped devices: do not burn or
mix with general
household waste, please treat them as normal electrical wastes.
4K HDBase-T Extender
Table of Contents
1. Introduction …………………………………………………………………………………… 2 1.1.
Overview……………………………………………………………………………….. 2 1.2. Features
……………………………………………………………………………….. 2 1.3. Package Contents
………………………………………………………………….. 2 1.4. Specifications………………………………………………………………………….
3 1.5. Panel Descriptions………………………………………………………………….. 4 1.5.1. Front
Panel………………………………………………………………….. 4 1.5.2. Rear Panel
………………………………………………………………….. 4
2. Wiring …………………………………………………………………………………………… 6 3. RS232 Operation
…………………………………………………………………………… 7 4.
Troubleshooting……………………………………………………………………………… 8 5. Customer
Service…………………………………………………………………………… 9
5.1. Warranty ……………………………………………………………………………….. 9 5.2. Scope
…………………………………………………………………………………… 9 5.3. Warranty Exclusion:
………………………………………………………………… 9 5.4. Documentation:………………………………………………………………………. 9
1
4K HDBase-T Extender
1. Introduction
1.1. Overview
Thank you for purchasing this product. For proper installation and optimum
performance, please read the instructions in this manual carefully. This
product is a slim transmitter receiver pair, which can extend HDMI 1080P@60Hz
signals up to 70m/230ft and 4K@60Hz (chroma sub-sampling 4:2:0 8-bit only)
signals up to 40m/130ft via a single Cat 6A/7 cable. The kit features bi-
directional PoC. It also supports bi-directional IR and RS232 pass-through.
1.2. Features
Supports resolutions up to 4K@60Hz 4:2:0 8bit and HDCP 2.2. Over a Cat 6A/7
cable, extends 4K@60Hz 4:2:0 8bit up to 40m/130ft and
1080P up to 70m/230ft. Over a Cat 5e/6 cable, extends 4K@60Hz 4:2:0 8bit up to
35m/115ft and
1080P up to 60m/200ft. Bi-directional PoC, one power adapter at either
transmitter or receiver side
can power both units. Supports bi-directional IR and RS232 pass-through.
1.3. Package Contents
1 x Extender Set 1 x Power Adapter (DC 18V 1A) 1 x IR Emitter 1 x Broadband IR
Receiver (30-50 KHz) 2 x 3.5mm 3-Pin Phoenix Connector 4 x Mounting Brackets
(with Screws) 1 x User Manual
2
4K HDBase-T Extender
1.4. Specifications
Video Input/Output Signal Type
Input/Output Resolution Supported
Deep color Maximum Data Rate Maximum Pixel Clock Audio
Audio Format Supported
General Operating Temperature Storage Temperature Humidity
ESD Protection
Power Supply Power Consumption (Maximum) Device Dimension (W x H x D) Product
Weight
HDMI with 4K@60Hz 4:2:0, HDCP 2.2 Up to 4096×2160@60Hz, including
4K@60Hz/4K@30Hz/1080P/1080i/720P Note: 4096×2160/3840×2160@50/60Hz is based on
chroma sub-sampling 4:2:0 8-bit only. 4K: 8/10/12 bit 1080P: up to 16 bit 10.2
Gbps 340MHz
Supports multichannel audio up to PCM 7.1, Dolb y True HD, DTS HD Master
Audio, Dolby Atmos a nd DTS:X
0°C to 45°C (32°F to 113°F) -20°C to 70°C (-4°F to 158°F) 10% to 90%, non-
condensing Human-body Model: ±8kV (Air-gap discharge)/ ±4kV (Contact
discharge) DC 18V 1A
8.88W (Pair, PoC)
108.8mm x 15mm x 64.2mm/ 4.3″ x 0.6” x 2.5” each for TX/RX 0.18kg/0.4lb each
for TX/RX
Transmission Distance:
Note: T568B straight-through Category cable is recommended.
Cable Type
Range
Supported Video
Input/Output:15m/50ft
1080P@60Hz
HDMI
Input: 10m/33ft Output: 15m/50ft
4K@60Hz
Cat 5e/6
60m/200ft 35m/115ft
1080P@60Hz 4K@60Hz
Cat 6A/7
70m/230ft 40m/130ft
1080P@60Hz 4K@60Hz
3
4K HDBase-T Extender
1.5. Panel Descriptions
1.5.1. Front Panel
TX & RX
No. Name
1
Power LED
2
Status LED
3
HDCP LED
4
Link LED
1234
Description On/Off: The device is powered on/off. On: The device is working
properly. Off: The device is not working properly. On: HDCP protected content
is being transmitted. Blinking: Non-HDCP protected content is being
transmitted. Off: No content is being transmitted. On: HDBT link is normal.
Blinking/Off: No HDBT link or link error.
1.5.2. Rear Panel TX
a
b
cd e
f
4
4K HDBase-T Extender
RX
1
2
No. Name
a & 1 DC 18V
b
HDBT OUT
c & 3 d & 4 e & 5
f
IR IN IR OUT RS232 HDMI IN
2
HDBT IN
6
HDMI OUT
34 5
6
Description Connect to the power adapter provided. With bi-directional PoC function supported, one power adapter is needed to be connected to the transmitter or receiver to power both units. Connect to the receiver via a Cat 5e/6/6A/7 cable. Connect to the IR receiver provided. Connect to the IR emitter provided. For RS232 pass-through. Connect to an HDMI source device. Connect to the transmitter via a Cat 5e/6/6A/7 cable. Connect to an HDMI display device.
5
4K HDBase-T Extender
2. Wiring
TV remote
Blu-ray Player
IR Receiver 1 IR Emitter 2 Transmitter
HDMI IN
Receiver
HDBT
IR Receiver 2
IR Emitter 1 HDMI OUT
Blu-ray Player remote
TV
Note: Connect the broadband IR receiver to IR IN and the IR emitter to IR OUT.
6
4K HDBase-T Extender
3. RS232 Operation
RS232 ports can be used for bi-directional RS232 signal pass-through between
the transmitter and receiver.
RS232 Device
Transmitter
RS232 Cable
HDBT
G
GND
Receiver
RX
TX
TX
RX
RS232 Cable RS232 Device
7
4K HDBase-T Extender
4. Troubleshooting
1. No Power Ensure the power is on. Ensure you use the power adapter provided in the package.
2. No Picture or Video Flash Ensure all devices are on, and all cables are qualified and connected
properly. Ensure all the cables’ length are within the maximum distance
(refer to Specification table). Ensure all the LED indicators are normal. When connecting source to display directly, ensure them can work
properly. Ensure the input resolution is supported by the device. Ensure the input resolution is within 4K@30Hz when Dolby vision
signal is input.
3. Weak or Not Working IR Signal Ensure the devices support IR control (not Bluetooth/WIFI). Ensure you use the IR cables provided in the package, and install them
correctly according to the Application Diagram. Pay attention to the control angle and distance.
IR Cable
IR Emitter IR Receiver
Suggested Angle 0°
0°
Distance (Max) 30cm
8m
When work with the third-party device, ensure it follows the pin
definition below.
IR Receiver
IR signal 5V
IR Emitter
Gnd IR signal
5V
8
4K HDBase-T Extender
5. Customer Service
The return of a product to our Customer Service implies the full agreement of
the terms and conditions hereinafter. There terms and conditions may be
changed without prior notice.
5.1. Warranty
The limited warranty period of the product is fixed three years.
5.2. Scope
These terms and conditions of Customer Service apply to the customer service
provided for the products or any other items sold by authorized distributor
only.
5.3.Warranty Exclusion:
Warranty expiration. Factory applied serial number has been altered or removed
from the
product. Damage, deterioration or malfunction caused by:
Normal wear and tear. Use of supplies or parts not meeting our specifications.
No certificate or invoice as the proof of warranty. The product model showed
on the warranty card does not match with
the model of the product for repairing or had been altered. Damage caused by
force majeure. Servicing not authorized by distributor. Any other causes which
does not relate to a product defect. Shipping fees, installation or labor
charges for installation or setup of the product.
5.4. Documentation:
Customer Service will accept defective product(s) in the scope of warranty
coverage at the sole condition that the defeat has been clearly defined, and
upon reception of the documents or copy of invoice, indicating the date of
purchase, the type of product, the serial number, and the name of distributor.
Remarks: Please contact your local distributor for further assistance or
solutions.
9
4K HDBase-T Extender
syscomtec Distribution AG Raiffeisenallee 8 D-82041 Oberhaching (bei München)
Tel.: +49 89 666 109 330 Email: post@syscomtec.com https://www.syscomtec.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>