Design Identification Pte YT-M1601-2WB Bedside Lamp with Wireless Charger User Manual
- June 6, 2024
- Design Identification Pte
Table of Contents
User Manual
Step 1: Screw the hanger into the post
Step 2: Screw the post into the base
Step 3: Install the corresponding adapter head for your regions and connect it to the power supply
Step 4: Check the power connection by touching the switch
Step 5: Enjoy fast charging wirelessly with HomeTree-Q2 Product name:
HomeTree-Q2
Product model: YT-M1601-2WB/YT-M1601-2WW
Input/current: 12V 2.5A
Product weight: 550 ± 50 g
Size: Dia 180mm x Height 330mm
Packing list: Sticker x 1
Charger Base x 1
Adaptor X1
Plug X 1
Solid wood with two Birds Lamps x 1
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.