XNEXX Y.100R Baron Night Ride Helmet Instruction Manual

: July 6, 2024
: XNEXX

XNEXX Y.100R Baron Night Ride Helmet

Product Specifications

Model: Y.100 / Y.100R
Brand: NEXX
Features: Pinlock compatible, ERGO padding, Chin deflector , X-COM3 compatibility
Available Sizes: XS, S, M, L, XL, XXL

FAQ

Frequently Asked Questions

How do I clean and maintain my NEXX helmet?
- To clean and maintain your NEXX helmet:
- Avoid exposing the helmet to any type of solvent.
- Handle the helmet with care to prevent damage to the paint and protective features.
- Store the helmet in a safe place; do not hang it on the motorcycle mirror or other supports that could damage the coating.
- Do not carry the helmet on the motorcycle or on your arm while riding.
- Always wear the helmet in the correct position and use the buckle to secure it properly.

INTRODUCTION

At NEXX, we do not just engineer helmets, we tech emotions.
We believe in the heat of passion – parts of life getting new blood.
HELMETS FOR LIFE is our motto, beyond the protection, past excellence, that any motorcyclist regardless of age or style lives the moment they wear NEXX.

Info

Please read this manual carefully before using the helmet and keep it in a safe place. In order to properly use in safety, please observe the following instructions. The main function of the helmet and to protect the head in case of impact. This helmet is designed to partially absorb energy of an impact partially destroying some components of the helmet. Whatever helmet it was heavily hit by an accident or that has received an equivalent shock must be replaced even if the damage is not obvious. To preserve the full effectiveness of this helmet, no modifications must not be brought to its structure or its components, without the approval of the homologation authority competent, likely to reduce the safety of the user. Only approved accessories preserve the safety of the helmet.

No component or device may be mounted or incorporated into the protective helmet, unless that this component or device is designed so as not to cause injury and that, when it is mounted or incorporated into the protective helmet, the latter remains in compliance with the requirements of homologation. No accessories may be mounted on the helmet if some of the symbols, other than the symbols of attachment, indicated in the approval of the accessory are not indicated on the approval label of the helmet.

DESCRIPTION OF COMPONENTS

Shell
Top Air Intake ventilation
Chin Air Intake Ventilation
Visor / Shield
Spoiler Y.100 Version
Visor Button
Shield/Visor Mechanism
X.COM 3 Base Cover
Spoiler Y.100R version

VENTILATION

HOW TO CLEAN THE VISOR

To clean the visor without altering its characteristics, only use water AND SOAP (preferably distilled) and a soft cloth.
If the helmet is very dirty (e.g. insects) you can add a little cleaning fluid water dishwasher.
Remove the visor from the helmet before performing a deeper cleaning.
Do not use never use objects to clean the helmet that CAN damage/scratch the visor.
Always keep your helmet in a dry place protected from light, preferably in the bag provided by NEXX HELMETS.

VISOR INSTRUCTIONS

REMOVING THE VISOR

2. OPEN THE VISOR ALL THE WAY UP
3. PUSH THE BUTTON – BOTH SIDES
4. PUSH THE VISOR – BOTH SIDES

HOW TO PUT ON THE VISOR

ALIGN THE VISOR WITH THE MECHANISM BOTH SIDES
PRESS TO LOCK

PINLOCK

Remove the visor from the helmet
Bend the visor to open and connect the Pinlock® lens to the pins in it so that it fits perfectly into the cavity dedicated to it.
The silicone sealant on the Pinlock® lens must be in contact with the visor to avoid condensation between the Pinlock® lens and the visor.

HOW TO USE THE SUN VISOR

CLOSE
FULL CLOSE POSITION
OPEN
FULL OPEN POSITION

HOW TO REMOVE THE SUN VISOR

OPEN THE SUNVISOR
PULL FROM BOTH SIDES
PULL DOWN
TAKE OFF THE VISOR

HOW TO PUT ON THE SUN VISOR

INSERT BOTH SIDES
PULL UP
READY TO USE

HOW TO PLACE THE SIDE SUPPORT OF THE CHAMBER

ERGO PADDING

The helmet size adjustment system is achieved with internal sponges which allow greater filling based on the shape of the head;

COATING SPECIFICATIONS

The lining of this helmet has the following characteristics:

Removable (only some models),
Anti-allergic
Anti-perspirant.

This can be removed and washable as shown in the diagram (some models only).
If for any reason this lining is damaged, it can be easily replaced (only some models).

REMOVABLE COVERING PARTS

REMOVING THE COVERING

HOW TO PUT ON THE COVERING

Using Instructions

BREATHING DEFLECTOR

MENTO DEFLETTORE

EMERGENCY SYSTEM

Emergency system to remove the side skates in the event of an accident, it will allow you to remove the helmet reducing the risk of worsening/creating injury to the user;
USE THIS SYSTEM ONLY IN CASE OF EMERGENCY!

OPEN THE CHIN STRAP
PULL THE EMERGENCY STRAP

ACCESSORIES

SIZE CHART

Using a flexible tape measure, measure the circumference of your head.

The correct choice of helmet size is essential to ensure the safety of the user. Not never wear a helmet that is too tight or too loose for the size of your head. Before buy a helmet, it is important to try to check the size of the helmet: make sure the helmet fits perfectly to the head; there must be no space between the helmet and the head; When they are performed some rotational movements (left and right) with the helmet on the head (closed) this must not be agitated, it is important that the helmet is comfortable and envelops the entire head.

X.COM 3

The Y.100/Y.100R model is ready for the installation of the NEXX X-COM3 intercom system.

MAINTENANCE AND CARE

Light colors with a matte finish require special attention as they will naturally appear more exposed to dust, fumes, compounds or other types of dirt.
THIS FACTOR IS NOT COVERED BY THE WARRANTY!
Neon colors subjected to long exposure to UV rays will lose their intensity.
THIS FACTOR IS NOT COVERED BY THE WARRANTY!
We are not responsible for any harm, loss or damage arising from faulty fitment of any accessory.
Do not expose the helmet to any type of solvent;
The helmet must be handled with care. Dropping it could damage the paint and diminish the its protective characteristics.
Keep the helmet in a safe place (do not hang it on the motorcycle mirror or other supports that could damage the coating). Do not carry the helmet on the motorcycle or on your arm while riding guide.
Always use the helmet in the correct position, using the buckle to adjust the head;
In order to maintain the correct functioning and handling of the visor, it is advisable to lubricate periodically coat the mechanisms and rubbers around the visor with silicone oil. The application is done with the help of a brush or pad. Do this in moderation and clean up the excess.
These adequate care allow you to maintain the softness of the rubber profiles and increase the life of the visor fixing mechanisms is significantly improved.

The quality of our helmets is achieved with the most advanced European technology. The helmets are produced for protection and exclusive use of motorcyclists. The specifications of this helmet are subject to change without fore warning.