Jaycar SZ1940 8 Way Switch Panel Instruction Manual
- June 1, 2024
- Jaycar
Table of Contents
Jaycar SZ1940 8 Way Switch Panel Instruction Manual
WHAT’S INCLUDED
A Switch Panel
B Circuit Control Box
C Mounting Brackets
D Power Harness, Connections
E Circuit Breaker Protector
F 80pcs Labels (Decals
PRODUCT FEATURES
- Manage up to eight auxiliary LED lights or electrical devices.
- 7-color LED ambient lighting
- Lighting control: Press and hold for 3 seconds to change the colour of the background light.
- Automatic brightness adjustment of the backlight
- ON/OFF switch for single-button operation
- There are 80 customisable labels included.
- DC 12V~24V | 600W – 1200W
- 60A resettable circuit breaker
SWITCH PANEL INDICATION
- Orange LED lights up to show the circuit on
- RGB LED illumination area, back light
- Integrated sensor circuit Backlit brightness dimmable
- Power on/off button, with memory function, 4 press the on / off button once to automatically remember the last use.
- | Area for DIY placement of the selected labels.
Press and hold the on/off button for 3 seconds to switch 7 colors of backlight
BACKLIT BRIGHTNESS DIMMABLE
The brightness of the lighting on the switch panel will automatically adjust
in reaction coming from external light.
The light on the switch panel will dim to lessen the impact on the driver’s
vision in the tunnel or other dark areas.
The light of the control panel will adjust and illuminate brighter depending
on the ambient light during the daytime.
80 PCS REUSABLE SWITCH LABELS
Thoroughly clean the switch panel.
Peel off the lable and firmly press down on the switch panel.
Multi-function labels for DIY your specific needs
DIY Labels
CONTROL BOX INSTALLATION
MOUNTING THE CONTROL BOX
There are two different installation methods available, fixed mount using the
bracket provided or installing it flush in a suitable area.
The ideal mounting of the control box should be in areas where the harness is
not exposed, preventing it from damage.
If you decide to make provision for the control panel, please check the
clearance to prevent any damage to the car’s wiring harness and other
components of the vehicle.
OPTION 1: Fix Mount
Using the mounting bracket as a guide, find a suitable location to mount the
control box.
OPTION 2: Flush Mount
Using the control box as a guide, find a suitable location to mount the
control box.
SWITCH PANEL INSTALLATION
SWITCH PANEL MOUNTING
- There are two different installation methods using the adjustable brackets provided.
- Attach the switch panel to the mount bracket you need, then use the supplied screw accessories to fix the bracket.
- The ideal thickness of the mounting surface should be between 1/8″ to 1/4″.
- Make sure the control wire and extension lead are long enough to reach the desired location.
- Check there is enough clearance in the desired location.
- Once you decide where to mount, use the bracket to mark the drill location
OPTION 1: Angle Adjustable Mount
OPTION 2: Flush Mount
SWITCH ASSEMBLY WIRING DIAGRAM
Connect to 8 auxiliary LED lights or electrical devices
The total power will go to 600W at 12V, 1200W at 24V and the maximum current
is 60A.
The maximum output current for 1 to 6 is 20A and for 7 to 8 is 30A.
The recommended connection method is to decrease the current gradually from 1
to 8. Ensure all the wiring connections are completed before connecting the
power cables to the battery.
| Circuit 1 | Circuit 2 | Circuit 3 | Circuit 4 |
|---|---|---|---|
| 5A | 5A | 10A | 10A |
| Circuit 5 | Circuit 6 | Circuit 7 | Circuit 8 |
| 20A | 20A | 30A | 30A |
Distributed by:
Electus Distribution Pty Ltd
46 Eastern Creek Dr,
Eastern Creek NSW 2766 Australia
Ph 1300 738 555
Int’l +61 2 8832 3200
Fax 1300 738 500
www.electusdistribution.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>