Lepro E1-30 AI LED Permanent Outdoor Lights User Guide
- July 29, 2024
- Lepro
Table of Contents
Lepro E1-30 AI LED Permanent Outdoor Lights
What’s in the box
Dimensions
- Model: E1-30 SKU: E1-30-US E1-30-EU E1-30-UK
- 29V — 0.82A, 24W, RGB+CCT(Warm White ~ Cool White), IP65, 15.3 m/50ft (Total), -20°C~40°C (-4°F~104°F)
- FCC ID: 2A3MAE1 IC: 27538-E1 HVIN: E1-30
- L7oBso lifetime: 15000 hours
- Model: E1-60 SKU: E1-60-US E1-60-EU E1-60-UK
- 29V — 1.24A, 36W, RGB+CCT(Warm White ~ Cool White), IP65, 30.6m/100ft (Total),-20°C~40°C (-4°F~104°F)
- FCC ID: 2A3MAE1 IC: 27538-E1 HVIN: E1-60
- L7oBso lifetime: 15000 hours
- Model: E1-90 SKU: E1-90-US E1-90-EU E1-90-UK
- 29V – 1.65A, 48W, RGB+ CCT(Warm White ~ Cool White), IP65, 45.9m/150ft (Total),-20°C~40°C (-4°F~104°F)
- FCC ID: 2A3MAE1 IC: 27538-E1 HVIN: E1-90
- L7050 lifetime:15000 hours
Maximum series connections for the same kind of product:
- E1-30: Up to 3 strings (45 lights)
- E1-60: Up to 5 strings (75 lights)
- E1-90: Up to 6 strings (90 lights)
App Connection
Turn on the phone’s Bluetooth and connect to the WiFi network.
Follow the on-screen steps to finish set up.
Voice Control
If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.
How to reset the light.
Long press the controller switch button for 5 seconds.
Device Settings
- Power on the lights and pair the product with the app first to ensure proper functionality.
- Clean and dry the house eave surface to ensure optimal installation.
- Install the string lights 5-12 cm away from the wall surface.
- a) Use adhesive tape on the back of the lights.
- b) For a secure installation, especially on rough surfaces, it is recommended to use screws.
SKU’s
- E1-30-EU
- E1-30-UK
- E1-60-EU
- E1-60-UK
- E1-90-EU
- E1-90-UK
Smart Lighting Holding Limited claims SKUs* meet the Radio Act 2014/53/EU. A complete Declaration of Conformity can be downloaded with this link: https://www.lepro.com/docs/
- Operation Frequency range
- US : 2412M#Z-2402 MHZ WiF) 2402MHz-2480 MHz (Bluetooth) 2412MHz-2472MHz(WiFi)
- EU &UK: 2402MHz-2480MHz(Bluetooth)
- Modulation Type
- DSSS(DBPSK/DQPSK/CCK) OFDM(BPSK/QPSK/16QAM/64QAM) GFSK
- Maximum transmit power
- 19 dBm e.i.r.p
- Antenna Type
- PCB Antenna
Instructions & Safety Information
- Make sure that you plug the adapter to the mains supply with the appropriate input voltage and wattage indicated on the adapter.
- Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp-holders or enclosures, loose connections, or exposed copper wire.
- Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
- Do not install in confined spaces.
- It’s normal that the lights in the string will automatically light up to perform a self-check each time they are powered on.
- Do not let lamps rest on the supply cord or on any wire.
- The controller contains a signal receiver. Please avoid placing the controller inside a metal shielded box. It can be kept outside, but don’t soke it into water.
- Make sure to place the power plug in a waterproof electrical box.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper or any material not part of the product when in use.
- Do not alter or replace the plug.
- The lights are not suitable for covering with thermally insulating material.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Where breakage or damage to lamps occurs, the strand must not be used/powered on but disposed of safely.
- LED module: luminous flux <40 lumen, based on test data with a length of 1 meter. Not belong to light sources.
- This light is intended for decorative purposes.
- Decorative ambiance light – not suitable for household room illumination.
- Do not connect the strand to an electrical supply while it is in the packaging.
- The string light cannot be cut to length.
- This light source is only for use in applications requiring high-quality coloured light. Use of this light source will lead to increased energy cost compared to equivalent more energy efficient product.
- Colour-tune able light sources with a minimum excitation purity of:
- Blue 440nm – 490nm 90%
- Green 520nm — 570nm 65%
- Red 610nm — 670nm 95%
- Only supports APP dimming.
- This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co – located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance 20cm between the
radiator& your body.
ISEDC Warning
This device complies with Innovation, Science and Economic Development Canada
licence-exempt RSS standard (s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This
enviornment should be installed and over rated with minimum distance 20cm
between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>