LANDMANN 28923 Fireplace Owner’s Manual

: July 27, 2024
: LANDMANN

Table of Contents

LANDMANN 28923 Fireplace
Specifications
Product Usage Instructions
FAQ
Introduction
PARTS LIST
FIRE PIT ASSEMBLY INSTRUCTIONS
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LANDMANN 28923 Fireplace

Specifications

Model: Landmann 28923
Assembly Time: 45 minutes

Product Usage Instructions

When unpacking the fire pit, ensure you have all the parts listed below:
Attach the (3) legs to the bottom screen sections using (6) hex nuts and (6) flat washers. Ensure even spacing and tighten the bolts securely.
Place the center ring on the bottom screen sections and align it with the top holes. Securely tighten the bolts after starting all bolts, including those on the bottom screen sections.
Attach the center ring to the bottom screen sections using (6) 20MM bolts and (6) hex nuts. Ensure all bolts are securely tightened.

FAQ

Q: What tools are needed for assembly?
A: A Phillips or plain screwdriver and an adjustable wrench are required for assembly.
Q: What should I do if I encounter issues during assembly?
A: Contact customer support at 1-800-321-3473 for assistance. Do not return the product to the store.

Introduction

READ FIRST! RULES FOR THE BALL O FIRE SAFE OPERATION

THIS OUTDOOR FIRE PIT IS FOR OUTDOOR USE ONLY!
USE ONLY ON BRICK, CONCRETE, STONE, OR OTHER MASONRY SURFACES!
DO NOT USE ON LAWNS, WOODEN DECKS, ARTIFICIAL WOOD OR ASPHALT!
KEEP THE OUTDOOR FIRE PIT A MINIMUM OF 10 FT. AWAY FROM BUILDINGS, STRUCTURES, ANY FLAMMABLE ITEMS AND VEHICLES.
NEVER USE UNDER LOW-HANGING TREE BRANCHES, TRELLIS, OR OVERHANGS OF ANY KIND INCLUDING COVERED PORCHES.
WARNING! NEVER USE GASOLINE, ALCOHOL, OR VOLATILE FLUIDS TO START OR RESTART FIRES.
DO NOT USE WITHOUT A FIREBOWL, THE FIREBOWL MUST BE USED AT ALL TIMES!
THIS FIRE PIT MUST BE USED ON A LEVEL SURFACE.
FIREWOOD MUST BE KEPT WITHIN THE BOUNDARIES OF THE FIREBOWL.
FIREWOOD MUST NOT BE ALLOWED TO TOUCH ANY PART OF THE SCREEN.
FOR LONGER PRODUCT LIFE, KEEP FIRES TO A RESPECTABLE SIZE, DO NOT OVERLOAD.
THE OUTDOOR FIRE PIT IS FOR ADULT USE ONLY.
DO NOT LEAVE UNATTENDED AT ANY TIME WHILE IN USE.
DO NOT MOVE THE FIRE PIT DURING USE.
DO NOT USE IN WINDY CONDITIONS!
DO NOT USE FOR BURNING LEAVES OR GARBAGE.
USE CAUTION WHEN TENDING THE FIRE, AS SURFACES WILL BECOME VERY HOT WHILE IN USE.
USE MITTENS OR GLOVES TO OPEN THE SPARK GUARD DOOR, THE HANDLE AND SPARK GUARD WILL BECOME VERY HOT!!
USE CAUTION AROUND THE FIRE PIT, AS HOT STEAM OR A FLARE-UP COULD CAUSE BURNS.
DO NOT ATTEMPT TO EMPTY OR REMOVE THE FIREBOWL FROM THE FIRE PIT DURING USE.
BEFORE EACH USE MAKE SURE THE OUTDOOR FIRE PIT IS IN GOOD WORKING CONDITION.
USE CAUTION AFTER THE FIRE HAS BEEN EXTINGUISHED, SURFACES WILL REMAIN HOT FOR SOME TIME.
THE OUTDOOR FIRE PIT MUST BE COMPLETELY COOLED OFF AND ALL EMBERS MUST BE EXTINGUISHED BEFORE ANY COVER CAN BE USED.

PARTS LIST

When unpacking the fire pit from the carton, make sure you find and become familiar with all the parts listed below. Use caution as some parts may have sharp edges.

LANDMANN-28923-Fireplace-FEATURED LANDMANN-28923
-Fireplace-FIG-2

FIRE PIT ASSEMBLY INSTRUCTIONS

A Phillips or plain screwdriver and an adjustable wrench are needed for assembly

Assembly time: 45 minutes

STEP 1: ASSEMBLE THE BOTTOM

Find (6) bottom screen sections [ B ] and assemble them together using (12) 13MM bolts [ U ], (6) 25MM bolts [ R ], and (18) hex nuts [ W ]. Assemble the 25MM bolt in the center as shown. Only finger tightened at this time.

STEP 2: ASSEMBLE THE LEGS

Assemble the (3) legs [ Q ] to the bottom screen sections using (6) hex nuts [ W ] and (6) flat washers [ Z ]. Note to evenly space the legs. Securely tighten the bolts.

STEP 3: ASSEMBLE THE CENTER RING

Place the center ring [ C ] on the bottom screen sections and align with the top holes.
Assemble using (6) 20MM bolts [ S ] and (6) hex nuts [ W ]. Securely tighten the bolts after all bolts have been started, including the (18) bolts on the bottom screen sections.

LANDMANN-28923-Fireplace-FIG-4

DO NOT RETURN PRODUCT TO THE STORE.
IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-800-321-3473 FOR ASSISTANCE.

STEP 4: ASSEMBLE THE TOP SCREEN SECTIONS

Find the top screen sections [ E, F, G ] and assemble them using (6) 10MM bolts [ T ] and (6) cap nuts [ X ]. Assemble with the cap nuts on the OUTSIDE. Finger tighten only.

STEP 5: ASSEMBLE THE CONNECTING RING

Assemble the connecting ring [ L ] to the top screen sections using (4) 13MM bolts [ U ] and (4) hex nuts [ W ]. Tighten all bolts in STEPS 4 and 5 securely.

STEP 6: ASSEMBLE THE DOOR SCREEN SECTIONS

Find the door screen sections [ H, J, K ] and assemble using (6) 13MM bolts [ U ] and (6) hex nuts [ W ]. Finger tighten only.

STEP 7: ASSEMBLE THE CONNECTING RING WITH HANDLE

Assemble the connecting ring with handle [ M ] to the door screen sections using (4) 13MM bolts [ U ] and (4) hex nuts [ W ].
Tighten all bolts in STEPS 6 and 7 securely.

LANDMANN-28923-Fireplace-FIG-5

DO NOT RETURN PRODUCT TO THE STORE.
IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-800-321-3473 FOR ASSISTANCE.

STEP 8: ASSEMBLE THE TOP SCREEN SECTIONS TO CENTER RING

Assemble the top screen section assembly [ E, F, G ] to the center ring [ C ] using (2) 13MM bolts [ U ] and (2) hex nuts [ W ]. Tighten securely.

STEP 9: ASSEMBLE THE HANDLES TO THE FIRE BOWL

Assemble the (2) handles [ N ] to the firebowl [ O ] using (4) hex nuts [ W ].
Tighten securely but do not overtighten or the porcelain will be cracked.

STEP 10: PLACE THE FIREBOWL

Place the fire bowl [ O ] inside and on the bottom of the fire pit.

STEP 11: ASSEMBLE THE DOOR SCREEN SECTION ASSEMBLY

Assemble the door screen assembly [ H, J, K ] to the pivot pins as shown. Squeeze the ends of the door together if necessary and insert them into the pins. Assemble using (2) 40MM bolts [ V ], (2) flat washers [ Z ], (2) lock washers [ Y ] and (2) hexnuts [ W ].
Tighten securely.

COVER

Add cover [ P ] to the fire pit. Keep the fire pit out of the weather and elements. Use cover only after the fire pit is completely cool to the touch.

LANDMANN-28923-Fireplace-FIG-7

HELPFUL HINTS

ADDING 5 LBS OF SAND TO THE BOTTOM OF THE FIREBOWL WILL EXTEND THE FIREBOWL LIFE.
KEEP THE FIRE PIT OUT OF THE WEATHER AND ELEMENTS.
STORE THE FIRE PIT IN A DRY LOCATION OUT OF THE WEATHER.
DO NOT LET THE FIREBOWL FILL WITH WATER.
DO NOT DUMP ASHES WHERE A FIRE CAN BE STARTED.
DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE COOLED.
USE ANY COVER ONLY AFTER THE FIRE PIT IS COMPLETELY COOL TO THE TOUCH.

LANDMANN-28923-Fireplace-FIG-8

Congratulations on your purchase of the Ball O Fire Fire Pit! At Landmann USA, we strive to provide you with an easy-to-use, easy-to-assemble product.
However, in the unlikely event your package should have a missing or defective part, please contact us at: customerservice@landmann-usa.com
-OR-
1-800-321-3473 M-F 8-5 ET.
Proof of purchase may be required.
Thank you!

AVAILABLE ACCESSORIES FOR THE BALL O FIRE

MULTI-PURPOSE POKER

MODEL 29240
Please visit our website at: www.landmann-usa.com
-ORCall
customer service toll-free at 1-800-321-3473

WARNING: NEVER USE GASOLINE, ALCOHOL, OR VOLATILE FLUIDS TO START OR RESTART FIRES.

HOT!

WARNING: HOT SURFACES DURING USE! USE MITTENS, POKER OR GLOVES ON THESE PARTS.

WARNING

DO NOT USE WITHOUT A FIREBOWL, THE FIREBOWL MUST BE USED AT ALL TIMES. KEEP FIREWOOD WITHIN THE BOUNDARIES OF THE FIREBOWL. DO NOT PILE WOOD ON ANY SCREEN PART. FIREWOOD MUST NOT BE ALLOWED TO TOUCH ANY PART OF THE SCREEN. FOR LONGER PRODUCT LIFE, KEEP FIRES TO A RESPECTABLE SIZE, DO NOT OVERLOAD.