kepeak Atmosphere Night Light Bluetooth Mesh Instruction Manual
- July 26, 2024
- KEPEAK
Table of Contents
Atmosphere Night Light
Bluetooth mesh
operation instructions
Product Introduction:
The ambient night light is a small night light controlled by dual mode WiFi and Bluetooth communication protocol. It can achieve remote control, timing control, and other functions, and can directly connect to WiFi without the need for a gateway.
Basic parameters:
Working voltage: AC110~220V-50Hz/60Hz
Working power: Max3W
Operating environment: temperature 0°C~40 °C, relative humidity less than 90%
Communication protocol: WiFi+Bluetooth
Instructions for use:
- Download the Yiweilian app from major app stores or scan the QR code below for downloadYi Weilian QR Code
- Install Yiweilian and register a login account
- Add device
Press and hold the button on the night light for 5 seconds while powered on, and the night light will enter a breathing stateOpen the mobile Bluetooth and open the Easy WeChat app for network distribution.
Click on thetsign in the upper right corner of the homepage
->Add Device ->Other Add Methods ->Bluetooth Distribution
->Confirmls the indicator light flashing and then click Next
->click on the scanned device ->enter the WiFi passwordConnect
–>add and select the room.
Key usage Instructions
Short press to switch scene lights back and forth, double-click to switch seven colors of lights back and forth. Press and hold for 1.5 seconds to turn off the lights, and press and hold for 5 seconds to enter the distribution mode.
FCC Information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.