KEPEAK XHP50 Rechargeable 5000 High Lumen Tactical Handheld Torch User Manual
- June 15, 2024
- KEPEAK
Table of Contents
KEPEAK XHP50 Rechargeable 5000 High Lumen Tactical Handheld Torch User
Manual
Please read this manual carefully before use. If you have any questions, please contact us in time.
Customer service: Kepeakpro@gmail.com
PRECAUTIONS DURING USE
- Do not shine directly into the eyes to avoid eye damage.
- The torch should not be disassembled and modified for repair by non-professionals as this may damage the circuit board. The repair warranty is not included with the modified product.
- If the flashlight is abnormally hot, makes strange noises and smells, or feels abnormal, stop using it immediately. Please do not reverse positive and negative of the battery, otherwise the circuit board will be burned.
- Do not use batteries of different types and voltages at the same time.
- Do not leave the torch in contact with sunlight, water, chemicals and corrosive gases for long periods of time as this may damage the torch. 1
CHECK THE BATTERY LEVEL
Check the remaining battery charge before use, If the battery is low, please
charge the batter
HOW TO INSTALL THE BATTERY EN
-
Open the back cover of the flashlight
-
Positive and negative batter
-
Install the flashlight correctly, with the positive pole facing in and the negative pole facing out
-
Rotate to close the back cover of the flashlight
Compatible with three batteries
-
26650 batter
-
18650 batter
-
AAA batteries
COMMON PROBLEM SOLVING
Why can’t I sell turn the flashlight on, aver recharging it via the included cable for several hours?
A1 : Please check if the battery is inserted before recharging the flashlight via the included cable
A2 :Please check whether the insulating film of the battery is torn off.
What should i do if the flashlight does not turn on or flashes when it is turn on?
A: This may be caused by low battery power. Please charge the battery before using it. If the problem cannot be solved, please contact us through the after-sales email in the manual.
The flashlight does not light up when charging, what should I do?
A: If you use 18650 battery or AAA batteries, please use the white tube to better secure the batteries to ensure good contact. Some batteries may not be discharged or the battery power is low, which may cause the product to fail to turn on.
For products with a power display func�on, the power display is light up, but the flashlight is sell not light up?
A. PI charge the battery using it. problem cannot be solved, please contact us through the after-sales email in the manual.
Q Do I have to cycle through the bu�ons to turn it off?
Annoy , you can press and hold the switch for 3 seconds to turn it of
Does this flashlight set support quick charging?
Annoy , the output voltage of the QC plug is much higher than the charging voltage of the flashlight, so it cannot be charged
If you have any other questors, please contact us in �me