Alcolizer OnSite Testing App User Guide
- July 26, 2024
- Alcolizer
Table of Contents
Alcolizer OnSite Testing App User Guide
Pairing Instructions Troubleshooting Quick Guide
Step 1
Access the iPad/iPhone Settings > Bluetooth menu.
Ensure BT is on.
Step 2
Access the Druglike Main Menu: press the Ʌ & V buttons together on the idle
screen and navigate to Configuration > Alco CONNECT > Configure
Step 3
Press the V button, ensure BT is enabled if not already. Press the V button
again until page 5 is displayed. The screen will start to populate with
devices.
Step 4
DO NOT select a device from this screen. It will be done from the App.
Step 5
Open the App, navigate to Settings > Pairing > Scan The App will search for
the Druglizer serial number. When it is displayed, select “Pair”. The
iPad/iPhone will request the pairing pin. Enter the pin displayed on the
Druglizer. Select Pair.
The Druglizer will display “Paired”.
Step 6
For ‘Full Test Mode’, go to ‘Settings’, select the Druglike device, set
expiry date and begin testing.
_Quick Test Mode is currently not supported in Druglizer.
_
Step 1
On the iPad/iPhone, select Settings > Bluetooth. Select the icon next to
the Druglizer serial number and select ‘Forget This Device’.
Step 2
Access the Druglizer Main Menu: press the Ʌ & V buttons together on the
idle screen and navigate to Configuration > Alco CONNECT > Forget. Select
Forget. The Druglizer and Android phone/tablet are now unpaired.
Step 3
Follow steps 1 – 6 of the Pairing Instructions (see left hand side) to
re-establish a connection between devices.
Testing Instructions
Step 1
Select the appropriate ‘Site’ from the dashboard, listed in white boxes
with the Site name.
Step 2
Select ‘Add Test’ on the top left.
Complete all donor information.
All fields are required.
Step 3
Tap the Donor Signature section to select test type and donor medication if
any. Donor must sign the Agreement.
Step 4
Select Drug Test once donor information has been completed.
Complete the drug screening using the LE5 Druglizer.
Step 5
The result will transfer to the app and populate the results screen.
Step 6
The donor must sign the Declaration form.
The Certification form will then pop up for the Collector to sign.
Step 7
The app will now display the Site section again and the test listed as
completed in green.
Follow the above steps if completing more than one test.
Step 8
Once the testing session is complete, sign the Summary form. Both
signatures are required. After signing, select ‘back’ on the top left of the
form.
Step 9
Select ‘Sync’ on the top of the screen. Ensure you have internet
connection.
Access the Alco CONNECT platform to view results and reports.
Alcolizer LE5 Druglizer
Contact any of our nation-wide offices by calling 1300 789 908 or email sales@alcolizer.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>