KEYSTONE KT-HBLED185 LED High Bay Fixture Owner’s Manual

KEYSTONE KT-HBLED185 LED High Bay Fixture Owner’s Manual

KT-HBLED80-1.5F-8XX-VDIM-P LED High Bay Fixture

KT-HBLED80-1.5F-8XX-VDIM-P /G2
LED HIGH BAY FIXTURE

DESCRIPTION

Complete Compact LED High Bay Fixture

APPLICATION

Used for commercial and industrial high bay lighting applications

PRODUCT FEATURES

• Architectural grade compact design
• Designed to accept easy screw-in installation of optional sensorsvia 1/2″ threaded receptacle in driver cover
• Compatible with Keystone SmartSafe emergency LED drivers (see accessories section for details)
• Powered by Keystone 0–10V dimming LED drivers with 12V Aux
• Frosted lens eliminates glare
• V-hook and chain mounting accessories included
• UL Listed 1598: Suitable for dry and damp locations
• Ambient operating temperature: −20ºC/−4ºF to 50ºC/122ºF
• THD: < 20%
• PF: > 0.90
• LED chip lifetime: L70 >100,000 hrs @ 25Cº/77Fº ambient fixture temp.

• ---

PERFORMANCE SPECIFICATIONS

CATALOG NUMBER| NOMINAL LENGTH| INPUT VOLTAGE| CCT| WATTAGE| LUMEN OUTPUT| EFFICACY| CRI| POWER FACTOR| LIFETIME
---|---|---|---|---|---|---|---|---|---
KT-HBLED80-1.5F-840-VDIM-P /G2| 1.5 ft.| 120 –277V| 4000K| 80W| 11,700| 150 lm/W| > 80.0| >0.90| 50,000 hrs
KT-HBLED80-1.5F-850-VDIM-P /G2| 1.5 ft.| 120 –277V| 5000K| 80W| 11,778| 151 lm/W| > 80.0| >0.90| 50,000 hrs

PHOTOMETRIC SPECIFICATIONS

PHYSICAL SPECIFICATIONS

ACCESSORIES

SENSORS
Factory-Installable OR Field-Installable (field-installable purchased separately)

| **SUFFIX*| CATALOG NUMBER| DESCRIPTION| UPC| EASYCODE**
---|---|---|---|---|---
| /HBFC1| KTSL-HBFC1-UV-KO-PIR| Smart Loop Bluetooth mesh PIR occupancy sensor with built-in fixture controller| 8.44E+11| AEJ-50
| /FC3| KTSL-FC3-12V-PKO-PIR| Smart Loop Bluetooth mesh screw-in PIR occupancy sensor with built-in fixture controller. No wiring required.| 8.44E+11| OCW-60
| /PIR2| KTS-PIR2-UV-KO| PIR sensor for high bay fixtures; Preset for 5 min hold time, 10 min standby time at 10% dim, daylight disabled| 8.44E+11| IOF-04
| /PIR-A| KTS-PIR3-12V-PKO /A| Smart Port PIR sensor for high bay fixtures; Preset for 1 min hold time, 3 min standby time at 30% dim, daylight disabled| 8.44E+11| RXQ-30
| /PIR-B| KTS-PIR3-12V-PKO /B| Smart Port PIR sensor for high bay fixtures; Preset for 5 min hold time, 10 min standby time at 10% dim, daylight disabled| 8.44E+11| LEF-34
| /MW3-A| KTS-MW3-12V PKO /A| Smart Port Microwave Occupancy sensor for high bay fixtures; Preset for 1 min hold time, 3 min standby time at 30% dim, daylight disabled| 8.44E+11| XYR-25
| /MW3-B| KTS-MW3-12V PKO /B| Smart Port Microwave Occupancy sensor for high bay fixtures; Preset for 5 min hold time, 10 min standby time at 10% dim, daylight disabled| 8.44E+11| SPF-37

• For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).
  Field-Installable / Field-Use ONLY (purchased separately)

PIR3-12V-PKO /A or /B sensors. Used to set and adjust all sensor settings, including high-end trim brightness, sensitivity, hold time, daylight threshold, stand-by time, and stand-by dimming level.| 8.44E+11| XSR-61

CORD SETS
Factory-Installable OR Field-Installable (field-installable purchased separately)

| **SUFFIX*| CATALOG NUMBER**| DESCRIPTION| UPC| EASY CODE
---|---|---|---|---|---
| /515P6| KT-CS-515P-6-18/3| Cord set for high bay; 125V NEMA 5-15P; straight blade plug; 6′ SJTOW cable; 18/3 wire| 8.43654E+11| UKH-26
| /L715P10| KT-CS-L715P-10-16/3| Cord set for high bays; 277V NEMA L7-15P; twist lock plug; 10′ SJTOW cable; 16/3 wire| 8.43654E+11| SFV-88
| /L615P10| KT-CS-L615P-10-16/3| Cord set for high bays; 250V NEMA L6-15P; twist lock plug; 10′ SJTOW cable; 16/3 wire| 8.43654E+11| ZQS-05
| /L515P10| KT-CS-L515P-10-16/3| Cord set for high bays; 250V NEMA L5-15P; twist lock plug; 10′ SJTOW cable; 16/3 wire| 8.43654E+11| GVH-22
| /L715P6| KT-CS-L715P-6-16/3| Cord set for high bays; 277V NEMA L7-15P; twist lock plug; 6′ SJTOW cable; 16/3 wire| 8.43654E+11| DVU-44
| /L615P6| KT-CS-L615P-6-16/3| Cord set for high bays; 250V NEMA L6-15P; twist lock plug; 6′ SJTOW cable; 16/3 wire| 8.43654E+11| LCW-66
| /L515P6| KT-CS-L515P-6-16/3| Cord set for high bays; 250V NEMA L5-15P; twist lock plug; 6′ SJTOW cable; 16/3 wire| 8.43654E+11| POC-82
| /MC63| KT-MC-NP-6-18/3| MC cable whip for high bays; no plug; inners 1/2″ strip on both ends; 6′ metal-clad cable; 18/3 wire| 8.43654E+11| EYP-82
| /MC65| KT-MC-NP-6-18/5| MC cable whip for high bays; no plug; inners 1/2″ strip on both ends; 6′ metal-clad cable; 18/5 wire (dimming wires included)| 8.43654E+11| CBU-56
| /NP10| KT-CS-NP-10-16/3| Cord for high bays; no plug; inners 1/2” strip on both ends; 10′ SJTOW cable; 16/3 wire| 8.43654E+11| YOH-90
| /NP-6| KT-CS-NP-6-16/3| Cord for high bays; no plug; inners 1/2” strip on both ends; 6′ SJTOW cable; 16/3 wire| 8.43654E+11| HUB-73
| /NP15| KT-CS-NP-15-16/3| Cord for high bays; no plug; inners 1/2” strip on both ends; 15′ SJTOW cable; 16/3 wire| 8.43654E+11| EYD-18

• For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).
  Note: For cord sets not listed here, please contact your Keystone sales rep.

EMERGENCY BACKUP

Factory-Installable OR Field-Installable (field-installable purchased separately)

| **SUFFIX*| CATALOG NUMBER| DESCRIPTION| UPC| EASY CODE**
---|---|---|---|---|---
| /EM5†| KT-EMRG-LED-5C-500-EN /DF| 5W, 500 lumen Smart Safe emergency backup with dual flex cables| 8.43654E+11| RAR-74
| /EM12†| KT-EMRG-LED-12C-1200-EN /DF| 12W, 1200 lumen Smart Safe emergency backup with dual flex cables| 8.90949E+11| YCV-23
| /EM20†| KT-EMRG-LED-20SD-2000EN/DF| 20W, 2000 lumen Smart Safe emergency backup with dual flex cables; Self-diagnostic| 8.43654E+11| BZU-19

• For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet). †
  Factory installation of emergency backup units will automatically include any relevant mounting bracket.
  Field-Installable / Field-Use ONLY (purchased separately)

MOUNTS AND BRACKETS
Factory-Installable OR Field-Installable (field-installable purchased separately)

• For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).
  Field-Installable / Field-Use ONLY (purchased separately)

LDN-61
KT-HBLED-CABLE-KIT| Aircraft cable hanging kit for LED high bay fixtures| 8.90949E+11| XPJ-88

STEP-DOWN TRANSFORMERS

Factory-Installable OR Field-Installable (field-installable purchased separately)

• For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).†
  Factory installation of step-down transformer units will automatically include any relevant mounting bracket.‡
  Step-down transformers cannot be ordered in conjunction with standard SJTOW cord set options (contact Keystone sales rep for available custom options if needed).

FIXTURE ORDERING INFORMATION

FIXTURE CATALOG NUMBER BREAKDOWN
KT-HBLED80-1.5F-8XX-VDIM-P /G2

1. Keystone Technologies
2. LED High Bay Fixture
3. Wattage
4. Nominal Length
5. Frosted Lens
6. 800 Series
7. Color Temperature
8. 0–10V Dimming
9. Premium Series
10. 2nd Generation

ORDERING EXAMPLES

FIXTURE WITH MULTIPLE FACTORY-INSTALLED ACCESSORIES*

KEYSTONE FIXTURE
CATALOG NUMBER
KT-HBLED80-1.5F-840-VDIM-P  /G2Note:  Step-down transformers cannot be ordered in conjunction with standard SJTOW cord set options (contact Keystone sales rep for available custom options if needed).

• When ordering more then one factory-installed accessory, use multiple suffixes as shown in the ordering examples above.
  Note: All accessories can also be ordered separately for field installation using just their regular Catalog Number, UPC, or Easy Code.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>