KEYSTONE S14 LED High Bay Light Instruction Manual
- May 15, 2024
- Keystone
Table of Contents
KEYSTONE S14 LED High Bay Light
Product Information
Specifications:
- Product Name: LED High Bay Light
- Microwave Sensor Detection Area: 8m Max
- Remote Control Distance: 5m
- Stand-by Period Low Brightness Ratios: 10%, 20%, 30%, 50%
- Hold Time Options: 5S, 30S, 1min, 3min, 5min, 10min, 20min, 30min
- Light Sensitivity Levels: 5Lux, 15Lux, 30Lux, 50Lux, 100Lux, 150Lux, Disable
- Dimming Range: 50% – 100%
- Default Brightness: 20%
- Waiting Time: 10S
Product Usage Instructions
Installation and Testing:
- Before installation, connect the mains to test whether the LED high bay light is working.
- Install the LED high bay light after confirming it is functioning.
Microwave Sensor Settings:
- Adjust Detection Area, Hold Time, Preset Brightness, Waiting Time, and Light Sensitivity as needed.
Remote Control Setup:
- Prepare 2 AAA batteries for the remote control.
- Execute commands using the remote control to turn the LED high bay light on and off.
Functionality:
- Use the toggle button to set the remote distance between the control and the sensor.
- Set the motion sensing detection range and stand-by time with preset low brightness ratios.
- Adjust hold time and stand-by period low brightness stand-by time.
- Configure the photocell sensor sensitivity for different light levels.
Additional Features:
- Use the ON/OFF button to toggle constant on/off mode.
- Press DIM+ or DIM- to adjust brightness levels incrementally.
Frequently Asked Questions (FAQ):
- Q: What should I do if I encounter problems with the remote control?
A: If you face issues with the remote control or need additional assistance, please contact us at service@lightdot.com.
SAFETY INFORMATION
IMPORTANT: Read all safety precautions and installation instructions carefully before installing
- Do not install the fixture with power on, also do not operate by wet hands.
- Ensure the fixture is mounted onto a good structurally surface that will support the fixture.
- The fixture is designed for use in 120-277VAC, 50/60Hz.
- Do not install on radiant-heating type ceiling.
WARNING: IF NOT FOLLOW THESE INSTRUCTION MAY LEAD TO A POTENTIALLY FATAL
ELECTRICAL SHOCK OR PROPERTY DAMAGE
NOTE: Before installation, connect the mains to test whether the led high
bay light are working or not, and then install.
Microwave Sensor
Factory Default| Detection area| Hold Time| Preset brightness|
Waiting time| Light Sensitivity
---|---|---|---|---|---
100%| 1min| 20%| 10S| 150Lux
Remote Control Setting
Note:
- Battery is not included, need to prepare 2 pcs AAA batteries by yourself.
- When command is executed, the led high bay light will turn on and off once, which means the command is successfully set.
Remote control has many functions, if you encounter problems in the process of
use, or need more remote control, please contact us Email
address:service@lightdot.com
Accessories:
Installation Instruction
STEP 1
-
Turn off the switch and circuit breaker before installing this LED light fixture. Screw the provided pothook(AA) clockwise into the UFO High Bay fixture, then tighten firmly.
STEP 2 -
Fixed the pothook to the High Bay Light by tighten screw (BB), Tighten the nut with a tool.
STEP 3 -
Fixed the pothook with screws .
STEP 4 -
Fixed the safety rope to the LED high bay light and ceiling to ensure the fixture safe.
STEP 5 -
Plug into the socket with120-277VAC input voltage. Installation successfully and turn on circuit breaker.
Guarantee
If your product does not arrive in good condition or does not work great
100%Satisfaction Guarantee within 5 years, please let us know we will provide
you a replacement or refund.
Customer service: service@lightdot.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>