Soundcore C30i Open-Ear Clip Earbuds User Manual
- June 15, 2024
- Soundcore
Table of Contents
Soundcore C30i Open-Ear Clip Earbuds User Manual
APP
Download the soundcore app to check the battery level of the earbuds, customize controls, update firmware and explore more exciting features. If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store. Click this link to download: http://dl-soundcore.soundcore.com/qcdl?flow=soundcore.
OVERVIEW
- Touch Control Area
- LED Indicator
- USB-C Charging Port
- Charging Case Button
WEARING
- Hold your ears with one hand, and gently clamp the earbuds onto the upper part of your auricles. Make sure the front side faces your ear canal and the back side with touch control rests behind your ear.
- Move the earbuds upwards or downwards until the earbuds fit securely and you can hear the sound well.
POWERING ON & PAIRING
Open the charging case, the earbuds will automatically power on and enter
Bluetooth pairing mode when connecting for the first time. Select “soundcore
C30i” from your device’s Bluetooth list. When pairing, the LED indicator will
start flashing white. After the pairing is successful, the LED indicator will
stay on for 2 seconds and then go off.
CHARGING
- Place the earbuds in the charging case and close it.
- Fully dry off the earbuds and the USB-C charging port before charging.
- Connect the charging case to a power supply by using the provided USB-C charging cable.
- A full battery recharge takes about 2 hours, and 10 minutes of charging offers 3 hours of playtime.
DUAL CONNECTIONS
To connect the earbuds with two Bluetooth devices at the same time, first open the soundcore app, go to settings and select Dual Connections > Enable Dual Connections > Connect New Device.
CONTROLS
- 1: Tap once ×2: Tap twice 2s: Tap and hold for 2 seconds
- You can also customize controls in the soundcore app.
POWERING OFF
To power off, return the earbuds to the charging case and close the case.
RESET
Place the earbuds in the charging case and leave the case open. Press and hold
the charging case button for 5 seconds until the LED indicator flashes red
slowly three times.
LED LIGHT GUIDE
When you connect the charging case with a power source:
- When both earbuds are out of the charging case, press the button underneath to check the battery of the charging case:
- When either earbud is in the charging case, press the button underneath to check the battery of a single earbud:
FIRMWARE UPDATE
You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is complete. During the update, ensure the earbuds are being charged and avoid any usage.
SPECS
Specifications are subject to change without notice.
Customer Service
[email protected]
[email protected] (For Middle East
and Africa Only)
[email protected]
+1 (800) 988 7973 (US/Canada)
Download PDF:Soundcore C30i Open-Ear Clip Earbuds User Manual