GAS MAX S1-6D1 SubwooferUser Manual
- June 3, 2024
- GAS
Table of Contents
MAX User Manual
MAXS1
S1-6 D1 / S1-8D1 / S1-10D1 / S1-10D2
HARDCORE CAR AUDIO
MAX S1-6D1 Subwoofer
WE PLAY LOUD!!
We know what you want. You want it LOUD, and that is exactly what we do, what
we live for. Vibrations, gut-punches and straight up loud music – that’s what
makes us tick. We won’t dress up in fancy words or claim to be something
we’re not. We are the NO BULLSH!T car audio brand!
Every single product with the GAS logo on it is born out of passion, the same
that has driven us for two generations and that will keep us rolling up to
your neighbourhood, winning and pushing the limits for many generations to
come!
It’s up to you to choose your own level of loud, and if you don’t like what we
do that’s OK. You are welcome back when you’ve had your first true GAS
experience. We don’t exclude, we don’t judge and we do not make up any
excuses for who we are.
We are GAS and we are proud to be LOUD!
SAFETY
NO COMPROMISES! Especially when it comes to safety. Before installing your MAX
S1 series subwoofer, make sure that you read through the manual thoroughly and
follow the instructions. Save the manual for future usage and reference!
Make sure to pay attention to the instructions when you see this symbol:
Do not expose your new subwoofer to excessive damp or moisture. If the
subwoofer is exposed it might result in electric failure, shock or damage to
the product. Servicing is required when the product has been damaged in any
way and/or doesn’t operate normally. Refer all servicing to qualified service
personnel only.
Keep the cables inside the vehicle separate from sharp edges or components
that may be affected or take damage. Follow the recommended cable sizes and
always use high quality cables and accessories. Even if you’re eager to put
the subwoofer to use – take no shortcuts when installing the cables, make sure
that all connectors are protected and secured.
Do not drill any holes without checking what lies beneath, and don’t cut
anything without making sure that no important components risk being damaged.
There is a first time for everything, if you need help – ask a friend or
contact your local GAS AUDIO POWER dealer/installer.
We want you to experience your products to the MAX, but we don’t want you to
injure yourself or others. Use common sense, respect high pressure levels and
volume, and follow your local laws and regulations.
UNPACKING
Unboxing your new MAX product is an experience, make sure that the subwoofer and all the accessories are included in the packaging:
DIMENSIONS
| A| B| C| D| E| F| G|
---|---|---|---|---|---|---|---|---
S1-6D1| Ø181.5| Ø163| Ø6| Ø143| Ø151| 109|
122| mm
S1-8D1| Ø220.5| Ø201| Ø6| Ø164| Ø185| 141|
157| mm
S1-10D1/D2| Ø275| Ø255| Ø6| Ø202| Ø235|
166| 181| mm
SPECIFICATIONS
Below you’ll find the specifications that has been checked and tested in our workshop. The specified sensitivity isn’t directly connected with the sound pressure in the vehicle, and shouldn’t be used as the sole indicator for comparison with other subwoofers.
MAX S1-6D1|
---|---
Component| Subwoofer
Size| 6.5” (165mm)
Nominal impedance| 1+1 Ohm
Power RMS| 400W
Power MAX| 800W
Freq. response| 30-200Hz
Voice coil| Dual 2” PCW
Voice coil former| Aluminum
Cone| Non-Pressed Paper
Dustcap| 3D IMPP
Basket| HD Aluminum
Magnet| 2x30oz HQ Ferrite
Suspension| High roll foam
w. stitch
Spider| Dual Nomex
Tinsel| Dual silver coated leads
Terminal| Heavy duty push terminals
Weight| 5.8 KG
MAX S1-8D1|
---|---
Component| Subwoofer
Size| 8” (200mm)
Nominal impedance| 1+1 Ohm
Power RMS| 550W
Power MAX| 1100W
Freq. response| 25-200Hz
Voice coil| Dual 2.5” PCW
Voice coil former| Aluminum
Cone| Non-Pressed Paper
Dustcap| 3D IMPP
Basket| HD Aluminum
Magnet| 2x56oz HQ Ferrite
Suspension| High roll foam w. dual stitch
Spider| Dual Nomex
Tinsel| Dual silver coated leads
Terminal| Heavy duty push terminals
Weight| 8.7 KG
MAX S1-10D1
Component| Subwoofer
Size| 10” (250mm)
Nominal impedance| 1+1 Ohm
Power RMS| 1500W
Power MAX| 3000W
Freq. response| 25-200Hz
Voice coil| Dual 3” PCW
Voice coil former| Aluminum
Cone| Non-Pressed Paper
Dustcap| 3D IMPP
Basket| HD Aluminum
Magnet| 2x100oz HQ Ferrite
Suspension| High roll foam w. dual stitch
Spider| Dual Nomex
Tinsel| Dual silver coated leads
Terminal| Heavy duty push terminals
Weight| 12.8 KG
MAX S1-10D2
Component| Subwoofer
Size| 10” (250mm)
Nominal impedance| 2+2 Ohm
Power RMS| 1500W
Power MAX| 3000W
Freq. response| 25-200Hz
Voice coil| Dual 3” PCW
Voice coil former| Aluminum
Cone| Non-Pressed Paper
Dustcap| 3D IMPP
Basket| HD Aluminum
Magnet| 2x100oz HQ Ferrite
Suspension| High roll foam w. dual stitch
Spider| Dual Nomex
Tinsel| Dual silver coated leads
Terminal| Heavy duty push terminals
Weight| 12.8 KG
PERFORMANCE
THIELE/SMALL PARAMETERS
| S1-6D1| S1-8D1| | S1-10D1| S1-10D2
---|---|---|---|---|---
Impedance| 1+1 Ohm| 1+1 Ohm| Impedance Fs| 1+1 Ohm| 2+2 Ohm
Re| 1.8 Ohm| 1.8 Ohm| Fs| 1.8 Ohm| 3.8 Ohm
Fs| 48.3Hz| 33.1Hz| Qms| 33.3Hz| 31Hz
Qms| 4.57| 3.78| Re| 5.52| 5.71
Qes| 0.48| 0.47| Qes| 0.51| 0.53
Qts| 0.43| 0.42| Qts| 0.47| 0.49
Vas| 3.9 L| 8.8 L| Vas| 11.7 L| 14.9 L
Sd (cm²)| 143| 201| Sd (cm²)| 330| 330
Mms| 79.7 g| 147.5 g| Mms| 320 g| 309.1 g
Le| 0.79mH| 0.87mH| Le| 1.26mH| 3.09mH
Xmax| 11mm| 12mm| Xmax| 20mm| 20mm
dB/SPL| 81dB 1W/1M| 80dB 1W/1M| dB/SPL| 81dB 1W/1M| 82dB 1W/1M
Bl| 9.8| 11.4| Bl| 14.9| 21.4
Driver Vol.Displacement| 1.0 L| 1.4 L| Driver Vol.Displacement| 2.5 L| 2.5 L
IMPEDANCE VS FREQUENCY
FEATURES
If you have this in your hand, you have finally made it. Congratulations! You are ready to take the next step, to enter a world of NO COMPROMISES with a subwoofer that will take your car to a whole new level. So get out there and impress the non-believers! Show them that true dedication comes from the inside of your trunk and that “good enough” just doesn’t cut it.
NEXT LEVEL BASS
A MAX subwoofer is designed to test the limits and match your dedication in
performance and style. Made for the hardcore bass heads out there – with a
rigid and durable cone made by non-pressed paper with Mica minerals that
perfectly balances awesome power, weight and musicality.
MADE TO MOVE
The dust cap is made of IMPP for a unique 3D design, an idea we borrowed from
the MAD S2 series. But since this is MAX, we took it one step further. With an
impressive high roll foam suspension, you get even more awesome cone
movement. The dual voice coil wire is made of PCW (Pure Copper Wire) and we’ve
introduced a bumped back plate on the 8” and 10” models for some extra
mechanical Xmax, which also minimizes the risk of voice coil damage.
TUNED TO THE EXTREME
The MAX S1 subwoofers will let everyone know that your audio dedication is
real. No detail has been overseen, and no compromises have been made. We show
our edication to the craft of bass with dual stacked HQ ferrite magnets to
achieve an insane amount of motor in the subwoofer. For extra durability,
we’ve also added a Dual Nomex spider to all models, and dual stitching on the
8” and 10” models. This makes sure that the last thing standing will be your
sound system. These subwoofer are extreme and over the top, as they should be!
COOLEST SUBWOOFER ON THE BLOCK
The MAX S1 will show everyone that you have reached the next level, the MAX
level. Having a subwoofer perform at this level demands extremely good
ventilation. Only the best and beyond is good enough! We solved the cooling
in two different ways. The material in the top/back plate is thicker for
optimal heat conduction, and the implemented DVS2 (Dual Ventilation System)
creates incredible heat dissipation while also reducing distortion.
HOW TO
INSTALL SUBWOOFER
Before installing your brand new subwoofer, make sure that you have everything
you need. Have the right tools ready, and make sure that you have the
necessary knowledge/skill to perform the installation properly. Preparation
and knowledge is crucial!
The MAX S1-6D1/S1-8D1/S1-10D1 uses dual 1 Ohm voice coils, while the MAX
S1-10D2 uses dual 2 Ohm voice coils. If you want to connect two or more S1
series subwoofers, you can vary the impedance by altering the wiring
configuration to use a series, parallel or series-parallel setup. The more the
merrier!
Make sure to look through the recommended wiring schematics below and choose
the setup that corresponds with the number of subwoofers in your sound system.
Take note of the impedance stability of your amplifier. Don’t be afraid to
consult your local GAS AUDIO POWER dealer/installer if you have any questions.
It is important to know the limits of your amplifier. Be sure to connect your
sound system with a suitable impedance to optimize your sound system.
It is important to know the limits of your amplifier. Be sure to connect your sound system with a suitable impedance to optimize your sound system.
BUILD ENCLOSURE
If you want a LOUD and awesome looking sound system, you should mount your MAX
subwoofer in an enclosure. Here’s information about optimized volumes for
ifferent types of enclosures and how they perform with the MAX S1 subwoofer.
If you feel unsure about how to build an enclosure on your own, consult a
local GAS AUDIO POWER dealer/installer.
MAX S1-6D1:
__
__
SEALED VENTED
VENTED SPL
| 6L| 93Hz| 0.55| x| x| x| Medium
---|---|---|---|---|---|---|---
15L| 42Hz| x| 50Hz| 1×3” (7cm)| 18.5cm|
Mini
**17L*| 44Hz| x| 57Hz| 1×3” (7cm)| 31cm| x**
- Driver displacement volume included
MAX S1-8D1:
SEALED VENTED
VENTED SPL
| 8L| 64Hz| 0.57| x| x| x| Medium
---|---|---|---|---|---|---|---
23.5L| 37Hz| x| 45Hz| 1×3” (7cm)| 22.5cm|
Medium
**31.5L*| 37Hz| x| 47Hz| 1×4” (10.4cm)| 36.5cm|
x**
- Driver displacement volume included
MAX S1-10D1/D2:
SEALED VENTED
VENTED SPL
| 17L| 57Hz| 0.57| x| x| x| Medium
---|---|---|---|---|---|---|---
27.5L| 36Hz| x| 45Hz| Slot 50cm²| 40cm|
Medium
**43L*| 37Hz| x| 47Hz| Slot 112cm²| 38cm|
x**
- Driver displacement volume included
MAX S1-10D1/D2:
DO I NEED POLYFILL?
Hell yeah! We recommend using polyfill for all sealed, vented and bandpass
enclosures for the best overall performance.
A polyfilled enclosure will bring out the full potential of your subwoofer, by
starting an isothermal process when energy flows through the fibers (very
scientific). This means that the air gets more dense, so it lessens the BOOM
and brings out the BASS! It can also reduce harmonic distortion. Sounds
complicated, we know. But it’s easy to do! Cover two sides in a ported
enclosure or make a loose polyfill ball behind the driver in a sealed
enclosure. Try it out! If you like the bass to hit harder – just take away
some. Do you want to lessen the effect? Put in some more.
TROUBLESHOOTING
NO POWER/SOUND
Check the subwoofer to make sure it isn’t damaged. If your subwoofer doesn’t
get any power, the most common issue is either in the wiring or in the
amplifier. Use a multimeter to measure the amplifier’s voltage on the +12V
terminal and the remote signal terminal. Use a multimeter to make sure that
you have a negative ground connection. Check the built-in fuse (if there’s
one) on the amplifier. If there’s no power coming through – control the fuse on
the power cable. If this is intact – make a full check of the wiring to
ensure cable integrity.
Check all the speakers connected to your sound system. Check all the speaker
cables and all the signal cables. Check your head unit to make sure no
settings are limiting the amplifier’s functions or the subwoofer. When all of
the above has been tested/looked over, and all is as it should be but there’s
still no sound, consult your local GAS dealer.
UNWANTED NOISE
Start by looking over the subwoofer and other speakers in the sound system so
there is no damage or connection issue with the wiring. Make sure that your
signal cables or speaker cables aren’t too close to the power cables. Check
your amplifier’s grounding point and make sure that the surface is clean. When
all of the above has been tested/looked over, and the unwanted noise does not
vanish, consult your local GAS dealer
DISTORTION
Start by looking over the subwoofer and other speakers in the sound system so
there’s no damage or connection issue with the wiring. Check the speaker
cables to make sure that the polarity isn’t reversed on one channel. Check
the settings on the amplifier, make sure that the gain/level is set according
to the amplifier’s instructions. If your amplifier has a boost function, lower
its effect or turn it off.
WARRANTY & DISPOSAL
This product is covered by warranty, depending on the conditions in the country where it’s sold. If the subwoofer is returned for service, please include the original dated receipt (or a copy) with the product. Make sure that the subwoofer is packaged properly and secured, preferably in its original packaging.
**** The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Don’t dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
This product has been granted with the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
GAS Audio Power products comply with the relevant pro- visions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product shouldn’t be disposed of as household waste. Alternative arrangements may apply in other jurisdictions. GAS Audio Power is a global partner of the European Mobile Media Association, an organization that focus on promoting the custom made mobile media installations to consumers.
THE GAS WORLD
You’ve entered the world of GAS. We aim to please, and we’ve made sure to have products made for you. No matter what stage of the LOUD-addiction you might find yourself in, there is a GAS product to fill your need.
MAD Just starting out? The MAD series is made to play LOUD and to be the
express lane to a no bullsh!t sound system that will make sure everyone can
hear you coming!
MAX The MAX series holds products made to deserve the center stage.
Powerful, heavy duty and designed to be noticed. We made NO COMPROMISES
because we know
that you wouldn’t accept it.
CMP The CMP series has been developed for the crucial seconds when the
dB-counter starts to tick. All CMP products have hand-picked, high quality,
COMPETITION GRADE components and they are specially designed to withstand an
awesome amount of power.
THANKS FOR JOINING
GAS AUDIO POWER!
GAS AUDIO POWER and SHAKY are registered trademarks by Winn Scandinavia AB and
is protected by relevant laws and jurisdictions such as
Copyright and Trademark laws.
Winn Scandinavia AB Elementvägen 15, 70227 Örebro, Sweden
www.winnscandinavia.com
Winn Scandinavia AB reserves for possible typos, factual or numeric errors
that may have been printed on
any products, package designs, user manuals and/or other included accessories.