Doageas 2AQ2W-E1 TWS Earbuds Instruction Manual

E1 TWS Earbuds

Packing list

1 pc product
1 pc charging cable
1 pc User Guide

Product Parameters

Output:5V/300mA
Rated current consumption of earphones| 10MA
Charging time| About 1 5H for earphones
About 2H for charging box
Listening time| 4-5H (70% power)
Bluetooth receiving distance| ≥ 10m

Operation Instructions

1. Open the cover, take out the earphones and wait for the earphones to automatically search and pair. Turn on the bluetooth of the mobile phone and search for the name “E1”, click to connect.
2. Touch the power button once, the main ear/slave ear is pause/play.
3. Touch the power button three times, the slave ear is volume up/the main ear is volume down.
4. Touch the power button twice, the slave ear is the previous song/the main ear is the next song.
5. Press and hold the power button for 2 seconds to wake up Siri (voice assistant) and click to cancel Siri (voice assistant).

Mobile phone volume synchronization: Bluetooth connection is successful, the machine volume is synchronized with the mobile phone volume (playing status).

Earbuds operation

Power on:

1. Take out the headphones from the charging box to automatically power on.
2. In the off state, put it in the charging box to activate the power on or press and hold the touch button for 3 seconds to power on.
3. LED status: red and blue lights flash slowly.

Power off:

1. Put the headphones back into the charging box to automatically power off.
2. In the on state, press and hold the touch button for 8 seconds to power off.

Automatic pairing mode:

1. The first time you pick up two headphones from the charging box, the left and right headphones will automatically power on and connect automatically, and enter pairing mode
2. Take out both headphones and automatically reconnect to the last paired mobile phone with a prompt sound
3. LED status: red and blue lights on both ears flash slowly. After pairing, the red and blue lights on the main ear flash and the lights on the slave ear are off.
   The device is successfully connected to the Bluetooth headset: no indicator light on the main and slave headphones

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID：2AQ2W-E1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>