horys XK Series Blockchain Computer Device User Manual
- July 26, 2024
- horys
Table of Contents
UserManual
BLOCKCHAIN COMPUTER
DEVICE
XK Family Line Up
XK Series Blockchain Computer Device
Product Overview & Specifications
Overview:
The Blockchain Computer Device is a high-performance computing device that
empowers users with the ability to participate in blockchain network
activities and experience rewards. With its compact physical design and
simplified user interface, the Blockchain Computer Device is your gateway to
the vast and growing digital asset space.
Basic Safety & Maintenance
- Electrical Safety: Only use the power cable provided in the box to power your device and connect it only to compatible power sources. Check electrical specifications to ensure device compatibility.
- Ventilation: Ensure the device’s vents are not blocked to prevent overheating.
- Liquid Exposure: Keep the device away from liquids to avoid damage.
- Cleaning: Clean the device with a soft, dry cloth regularly to prevent the accumulation of dust outside and inside the device.
- Caution: Do not use chemical cleaners, as these might damage the finishing on the surface of the device.
| XK 500| XK 1000| XK 5000| XK 10000| XK Validator
---|---|---|---|---|---
Device
Proportions| 14x 13x
6 cm| 14x 13x
6 cm| I6x 14x
8 cm| 20x 15x
10 cm| 20x 15x
10 cm
Finishing| Premium
Plastic Case| Aluminum
Case| Aluminum
Case| Aluminum
Case| Black
Aluminum
Case
Connectivity| 2.4Ghz /
5Ghz| 2.4Ghz /
5Ghz| 2.4Ghz /
5Ghz| 2.4Ghz /
5Ghz| 2.4Ghz /
5Ghz
Ports| I WAN Port
I LAN Port| I WAN Port
I LAN Port| I WAN Port
I LAN Port| I WAN Port
I LAN Port| I WAN Port
I LAN Port
Power| External I 2V
Power
Adapter| External
I2V Power
Adapter| 110-220V| 110-220V| 110-220V
Processor| MTK| MTK| Intel® CoreTM
i5 Processor| Intel® CoreTM
i5 Processor| Intel® CoreTM
i7 Processor
Set up Instructions:
-
Unbox and Inspect:
1.2. Open the box and ensure that all the items listed in Section 3 [What’s in the Box] are present and in brand-new condition*
1.3. Locate the serial number on the back of the device and note it down for later steps -
Connect to Power:
2.1. Plug the appropriate end of the power cable to your Blockchain Computer Device
2.2. Connect the other end to a power outlet -
Network Connection:
3.1. Take the Ethernet cable from the box
3.2. Plug the blue color-coded end of the cable into the WAN port of your device
3.3. Plug the yellow color-coded end of the cable into a free port on your WiFi router
3.4. Wait approximately 15-30 minutes for the device to activate
3.5. A green indicator in front of your device will light up to let you know that you have connected to the network successfully -
Scan the QR Code Below
4.1 Continue your user setup by scanning the QR code helow:
*Should you have factory-related issues with your fiarite. brand-new device, please do not hesitate to raise a fe ie ticket at https://support.horystech.com/support/home.
What’s Inside the Box:
- Blockchain Computer Device
- Ethernet cable
- Power cable
- Product manual with QR code linked to our web-based digital product guide
Product Visualization:
5000/10000/ValidatorSet
FAQs:
1. How does the product connect to the network?
- The device requires an internet connection via an ethernet cable to your router.
2. Can I connect multiple devices in a business setting?
- Yes, as long as you have vacant internet ports. Independent IP addresses are not necessary.
3. Can I gift the device to another user?
- Each device is linked to the order ID and is non-transferable.
Contact Information
Customer Support Hub:
https://support.horystech.com/support/home
Support Email: support@horystech.com
General Queries Email: info@horystech.com
Website: https://horystech.com/
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>