horys XK Family Line Up Blockchain Computer Device User Manual
- July 28, 2024
- horys
Table of Contents
UserManual
BLOCKCHAINCOMPUTER
DEVICE
XKFamilyLineUp
XK Family Line Up Blockchain Computer Device
SCAN QR CODE TO GET STARTED
Product Overview & Specifications
Overview:
The Blockchain Computer Device is a high-performance computing device that
empowers users with the ability to participate in blockchain network
activities and experience rewards. With its compact physical design and
simplified user interface, the Blockchain Computer Device is your gateway to
the vast and growing digital asset space.
Basic Safety & Maintenance
- Electrical Safety: Only use the power cable provided in the box to power your device and connect it only to compatible power sources. Check electrical specifications to ensure device compatibility.
- Ventilation: Ensure the device’s vents are not blocked to prevent overheating.
- Liquid Exposure: Keep the device away from liquids to avoid damage.
- Cleaning: Clean the device with a soft, dry cloth regularly to prevent the accumulation of dust outside and inside the device.
- Caution: Do not use chemical cleaners, as these mightdamage the finishing on the surface of the device.
| XK 500| XK 1000| XK 5000| XK 10000| XK Validator
---|---|---|---|---|---
Device Proportions| 14 x 13 x 6 cm| 14 x 13 x 6 cm| 16x 14x 8 cm| 20x 15x 10
cm| 20x 15x 10 cm
Finishing| Premium Plastic Case| Aluminum Case| Aluminum Case| Aluminum Case|
Black Aluminum Case
Connectivity| 2.4Ghz/ 5Ghz| 2.4Ghz/ 5Ghz| 2.4Ghz/ 5Ghz| 2.4Ghz/ 5Ghz| 2.4Ghz/
5Ghz
Ports| I WAN Port
1 LAN Port| 1 WAN Port
I LAN Port| I WAN Port
I LAN Port| I WAN Port
I LAN Port| I WAN Port
I LAN Port
Power| External I2V
Power Adapter| External
12V Power Adapter| 110-220V| 110-220V| 110-220V
Processor| MTK| MTK| Intel!) Co”reTI iS Processor| Intel!) Core”‘ i5
Processor| Intel!) Core”‘ i7 Processor
Setup Instructions:
1. Unbox and Inspect:
1.2. Open the box and ensure that all the items listed in Section 3 [What’s in
the Box] are present and in brand-new condition*
1.3. Locate the serial number on the back of the device and note it down for
later steps
2. Connect to Power:
2.1. Plug the appropriate end of the power cable to your Blockchain Computer
Device
2.2. Connect the other end to a power outlet
3. Network Connection:
3.1. Take the Ethernet cable from the box .
3.2. Plug the blue color-coded end of the cable into the WAN port of your
device
3.3. Plug the yellow color-coded end of the cable into a free port on your
WiFi router
3.4. Wait approximately 15-30 minutes for the device to activate
3.5. A green indicator in front of your device will light up to let you know
that you have connected to the network successfully
4. Scan the QR Code Below
4.1. Continue your user setup by scanning the QR code below:
Should you have factory-related issues with your brand-new device, please do not hesitate to raise a ticket at https://support.horystech.com/support/home.
What’s Inside the Box:
- Blockchain Computer Device
- Ethernet cable
- Power cable
- Product manual with QR code linked to our web-based digital product guide
Product Visualization:
5000/ 10000/ Validator Set 500/1000
Set
FAQs:
1. How does the product connect to the network?
- The device requires an internet connection via an ethernet cable to your router.
2. Can I connect multiple devices in a business setting?
- Yes, as long as you have vacant internet ports. Independent IP addresses are not necessary.
3. Can I gift the device to another user?
- Each device is linked to the order ID and is non-transferable.
Contact Information
Customer Support Hub:
https://support.horystech.com/support/home
Support Email: support@horystech.com
General Queries Email: info@horystech.com
Website: https://horystech.com/
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>