Skullcandy STOMP Bluetooth Party Speaker User Guide

: July 26, 2024
: Skullcandy

Table of Contents

Skullcandy STOMP Bluetooth Party Speaker
Product Specifications
Product Usage Instructions
Frequently Asked Questions (FAQ)
PRODUCT OVERVIEW
FUNCTIONS
CHARGING THE Stomp XXL™
CONNECTION PRIORITY
TROUBLESHOOTING
SPECIFICATIONS
FCC Warning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Skullcandy STOMP Bluetooth Party Speaker

Product Specifications

Model: 2SKSK1852
Warranty: 1 Year
Power Source: AC Power Input
Inputs: Microphone, AUX 3.5mm, USB-A Audio, USB-C Power
Functions: Play/Pause, Volume Up/Down, Next/Previous Track, True Wireless Stereo Pairing, SKDY Multi-linkTM Transmitting, Battery Status Check, Light Show Mode, Strobe Light Control, Dual-Device Connection, Charge Out

Product Usage Instructions

Basic Functions:

Play / Pause: Press the button once to play or pause audio.
Volume Up: Press + button to increase the volume.
Volume Down: Press – button to decrease the volume.
Next Track: Press and hold + button for 2s to skip track.
Previous Track: Press and hold – button for 2s to go to the last track.

Wireless Stereo Pairing and Multi-linkTM Functionality:
To pair speakers together and utilize advanced features:

True Wireless Stereo Pairing: Press the TWS button on two speakers to pair them for stereo audio.
Exit True Wireless Stereo Mode: Press the TWS button to exit TWS pairing.
SKDY Multi-linkTM Transmitting: Connect a speaker and press Multi-link(TM) button for multi-speaker connection.

Battery and Light Controls:

Check Battery Status: Press + and – buttons together for 1s to hear battery level.
Light Show Mode: Hold Light Show button for 2s to toggle light show ON/OFF.
Strobe Light Control: Double press Light Show button to toggle strobe light ON/OFF.

Dual-Device Connection and Charge Out Functionality:

Dual-Device Connection: Pair two devices to the speaker simultaneously for DJing.
Charge Out: Connect a USB-CTM or USB-A cable while speaker is ON to charge a portable device.

Charging the Stomp XXLTM:
Connect the speaker using the provided power cord to an appropriate power source. LED indicators will show battery status.

Frequently Asked Questions (FAQ)

How can I check the battery level of the speaker?
Press and hold the + and – buttons together for 1 second to hear a voice prompt indicating the battery level.
Can I pair two different SKDY speakers together?
Yes, you can pair different SKDY speakers together using SKDY Multi-linkTM functionality. Ensure the newest or feature-rich speaker is set as the transmitting speaker for optimal performance.

PRODUCT OVERVIEW

FUNCTIONS

Power ON / OFF:
Press and hold the “O” button for 2s. If not connected to a Bluetooth® device or connected but idle (not playing audio) the speaker will turn OFF automatically after 15 min.

Play / Pause:
Press the button once to play or pause audio.

Volume Up:
Press “+” button to increase the volume.

Volume Down:
Press “-” button to decrease the volume.

Next Track:
Press and hold “+” button for 2s to skip track.

Previous Track:
Press and hold “-” button for 2s to go to last track.

Bluetooth® Pairing:
Press and hold the “Bluetooth®” button for 2s to enter Bluetooth® Pairing Mode. The speaker will disconnect from any paired device and will become available to pair to new devices. The speaker will stay in pairing mode for 60s, or until connected. Status LED will blink blue while in Bluetooth® Pairing Mode.

True Wireless Stereo Pairing:
Press the “TWS” button on any two Stomp XXL™ speakers to pair them together and play audio in stereo. Status LED will be cyan to indicate Right channel and yellow to indicate Left channel.

Exit True Wireless Stereo Mode:
Press the “TWS” button to exit TWS pairing.

SKDY Multi-link™ Transmitting:

First, connect to the Stomp XXL™ speaker by BT, AUX, or USB-A audio input connection.
Press and hold the “Multi-link(TM)” button for 2s to set the speaker as transmitting. Any receiving speaker enabled SKDY Multi-link™ will now be able to join. Status LED will be purple.
*When pairing different SKDY speakers together, it’s recommended to set the newest speaker (or the one with the most features) as the transmitting speaker.

SKDY Multi-link™ Mode Receiving:
Single press the “Multi-link™” button to set the speaker as receiving (the speaker will automatically disconnect from any paired Bluetooth® devices). Status LED will be green. Up to 99 receiving speakers can be connected to a single transmitting speaker.

Check Battery Status:
The 4 LED indicators show the battery level. Press and hold “+” and “-“ buttons together for 1s to initiate a voice prompt of the battery level.

Light Show Mode
Press and hold the “Light Show” button for 2s to turn the light show ON or OFF. Single press the “Light Show” button to cycle between different light show modes.

Strobe Light ON/OFF
Double press the “Light Show” button to toggle the strobe light ON or OFF.

Dual-Device Connection:
You can pair two transmitting devices (mobile phones for example) to the Stomp XXL™ speaker at the same time to DJ together. Pause the music on the first device to play a song from the second device.

Charge Out:
While the speaker is ON, plug a USB-C™ or USB-A cable into the appropriate port to begin charging your compatible portable device automatically.

CHARGING THE Stomp XXL™

Use the included power cord to connect the speaker to an appropriate power source to begin charging. The LED indicators will show the battery is charging. When all 4 LEDs are ON the battery is fully charged.

Warning:

To avoid damage to the speaker and battery, it is important to only use a power source that matches the power requirements listed on the speaker’s rating label.
To avoid overheating, it’s recommended not to place the speaker in direct sunlight, especially while charging and playing music.
(If applicable) where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. In order to disconnect the equipment from the power supply, a disconnection device should be provided. Disconnect the main plug from the AC outlet when the unit in not it use for extended periods.

Battery status indication (not charging):

0-5% – speaker is OFF all 4 LEDs are OFF
5-10% – 1st LED blinks white, status LED blinks red
10-25% – 1st LED is ON white, other LEDs are OFF
25-50% – 1st + 2nd LEDs are ON white, other LEDs are OFF
50-75% – 1st + 2nd + 3rd LEDs are ON white, other LEDs are OFF
75-100% – All LEDs are ON white

Battery status indication (while charging):

0-25% – 1st LED blinks white, other LEDs are OFF
25-50% – 1st LED is ON white, 2nd LED is blinking.
Other LEDs are OFF
50-75% – 1st + 2nd LEDs are ON white, 3rd LED is blinking.
Other LEDs are OFF
75-99% – 1st + 2nd + 3rd LEDs are ON white, 4th LED is blinking.
Other LEDs are OFF
100% – All 4 LEDs are ON white Operating ambient temperature: -10 – 40°C,
Storage and transportation ambient temperature: -20 – 70°C, altitude not higher than 2000m (air pressure not less than 80kPa).

WARNING:

replacement of a battery with an incorrect type may defeat a safeguard;
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, may result in an explosion;
leaving a battery in an extremely high temperature environment, such as sunshine, fire, or hot surface may result in an explosion or the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
CAUTION
Risk of fire or explosion if the battery is replaced by an incorrect type!

CONNECTION PRIORITY

AUX > USB > BT (Bluetooth®)

To play from an AUX source, simply plug in an AUX cable to the speaker and your audio source device. It will automatically have priority over USB and BT.
To play from a USB source, plug in a USB flash drive and make sure that AUX is disconnected. It will automatically have priority over BT (but not over AUX).
To play from BT source, connect a Bluetooth® enabled device and make sure that AUX and USB are disconnected.

Microphone Proper Use:

TROUBLESHOOTING

Factory Reset:
Press and hold “-” and “+” buttons at the same time for 10s to initiate factory reset. The speaker will revert to factory settings and all previously paired devices will be deleted. Status LED will blink between blue and red while resetting. Alternatively, use a pin to press the “RESET” button.

Speaker is not playing wirelessly:
If the speaker is not playing audio although it’s connected to a Bluetooth™ device, it may be because of the audio connection priority. Disconnect any AUX or USB-A connections to the speaker and try again.

SPECIFICATIONS

Bluetooth® Version ：5.3
Battery Capacity: 11.1V 4000mAh
Charging Input: AC 110-220V
Playtime: 12 hours (Based on 80dBSPL(c) with light show OFF)
Charging Time: 4.5-5 hours
Operating Range: 10M
Audio Inputs: Bluetooth®, USB-A, Aux 3.5mm
Charging Outputs: USB-C, USB-A
Battery Standby Time: 365 Days
IPX Rating: IPX5 (Splashproof)

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated within 20cm minimum distance between the radiator & your body.

Canada warning:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.

Packaging Includes: