BOULT UFO Truly Wireless in Ear Earbuds User Manual
- July 26, 2024
- BOULT
Table of Contents
BOULT UFO Truly Wireless in Ear Earbuds User Manual
Know your UFO
What’s in the box ?
Charging Case
Earbuds
Type C Charging Cable
Extra pair of ear tips
Warranty Card
Product specification
Product Name – TWS Bluetooth Headset
Model – Boult Audio AirBass
Bluetooth Range~10m/33ft (without any obstacles)
Earbuds Charging Time – 45 mins
Frequency Range – 20Hz – 20KHz
Technology – HFP/HSP/A2DP/AVRCP
Input – DC5V = 1A
How to use your UFO?
Touch Controls
The Touch Area (Multi-Functional Touch Panel) is located in the upper part of
the earbuds handle.
Wearing Earbuds
The earbud marked with Lis worn on the left ear and the earbud marked with R
is worn on the right ear
Power ON/OFF:
Power ON: Auto: Open the charging case and take out the earbuds to Power ON.
Manually: Tap and hold the multifunction button (MFB) for 3 seconds.
Power OFF : Auto: Place both the earbuds in the charging case, close the lid. Manually: Tap and hold the multifunction button (MFB) for 5 seconds.
Play/Pause
Tap the MFB once
Previous Track
Double Tap the left MFB
Next Track
Double Tap the right MFB
Voice Assistant
Long Press the MFB for 2s
Volume +
Triple Tap the right MFB
Volume –
Triple Tap the left MFB
Answer the Call
Tap the MFB once
End Call/Reject
Double Tap the MFB
Game/Music Mode
Tap the MFB four times
Pairing
Open the charging case, and take out the earbuds, the earbuds LEDs will start flashing automatically until paired with a device.
Activate Bluetooth on the device, turn on Bluetooth, search for pairing name “Boult Audio Airbass” and click on it.
Single Mode : When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
Bluetooth Lost: Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can pair with other devices. If the connection range is exceeded, the earbuds will enter back into connection mode. In case of no connection within 5 minutes, the earbuds will turn off.
Reset
If your earbuds fail to pair, or only one works, reset them.
Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off Bluetooth.
Put earbuds in the charging case and then take out to pairing modes, tap L&R 5 times simultaneously, hear “DU” prompt voice to clear all pairing.
Put earbuds back into the charging case.
Voice Prompts
You will hear ‘power on” when the headset powers on.
You will hear ‘power off’ when the headset powers off.
You will hear ‘connected’ when the headset is paired.
You will hear ‘low battery’ when the headset is in low power status.
You will hear ‘combat mode’ when the headset is in gaming mode.
Maintenance Instructions
Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal channels to be applicable for warranty.
Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.
LED Functions
Opening the Case
The 4 Case LEDs will turn on, one- by one and stop at the current case battery
level
After 1 second, all the case and front LEDs will breathe for 6 times and turn
off completely
Closing the Case
Front LEDs will breathe for 10 times and then turn off completely
Charing the Case
Front LEDs will blink continuously until charging is complete
When fully Charged
Front LEDs will glow continuously
When the buds are connected
Music Mode: Both earbuds’ LEDs stay Off
Gaming mode: Both earbuds’ LEDs will blink together
https://www.boultaudio.com/pages/boult-amp
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>