UGREEN MU008 Multi Mode Vertical Mouse Instruction Manual

Multi-mode Vertical Mouse
Model:MU008
User Manual

Product Overview

1. Left Button

2. Indicator
   (Low Battery/DPI Level }

3. Forward Button

4.  Backward Button

5. Scroll Wheel

6.  Right Button

7. DPI Switch Button

8. Device Switch Button

9. Optical Sensor

10. Power On/System Switch

11. 2.4G Indicator

12.  Bluetooth 1 Indicator

13. Bluetooth 2 Indicator

14. USB Receiver

System Selection

Slide the system switch on the bottom of the mouse to select system.
The mouse will automatically turn on when system switching is completed.

2.4GHz Connection (Default)

1. Take the receiver out and insert it into your device.
2. Turn on the mouse, and indicator “1” on the bottom of the mouse will light up in green.
3. Randomly click and move the mouse to make sure it works normally.

Forced Pairing (If connection fails based on the steps above)

1. Take the receiver out of the USB port.
2. Press and hold the device switch button for 3s until the green indicator starts blinking.
3. Insert the receiver into the device.

Bluetooth Connection

The mouse can connect up to 2 Bluetooth devices simultaneously. FoF pairing the 1st Bluetooth device:

1. Short press the device switch button once to enter pairing mode, al this time the indicator “2” flashes quickly.
2.  For Windows 10 or later, please follow the popup windows to complete the pairing. While for other systems, please connect to “UGREEN BLE Mouse” from your laptop/tablet/smartphone Bluetooth list.
3.  The indicator “2” will turn on when connection is completed.
   Please refer to the steps above if you need to pair the 2nd device.

Forced Pairing (If connection fails based on the steps above)

1. Press and hold the device switch button for 3s until the indicator “2” or “3” starts blinking.
2. Enter the Bluetooth devices list of the connected device, search the mouse Bluetooth and connect.

Mode Switching

The mouse can connect up to 3 devices simultaneously and the indicators corresponding to the device are “1”, “2” and “3”.
Short press the device switch button to switch between the connected devices. The corresponding indicator will turn on for about 3s when switching is succeeded.

DPI Adjustment

1. Short press the DPI switch button to adjust the mouse sensitivity in the order of “1600 (default) >2000>4000>1000”.
2. The flashing frequency of the indicator may vary due to different DPf adjustments.

Low Battery

Low battery (<5%): Indicator keeps flashing for about 5s.

WARNING

• Please do not dismantle or modify the product unless you have to change the battery.
• Please do not shine the light directly into human eyes.
• To prevent product damage from battery leakage and corrosion, plaase remove the battery if not in use for prolonged periods.
• Discontinue use immediately if the battery is severely swollen.
• Do not use it in a high-temperature environment.
• Do not use the battery if it is immersed in water!
• Please keep this product out of the reach of children.

Specifications

macOS 10.5 or later
Linux
Chrome OS
Android 5.0 or later
The data are measured by UGREEN lab but may vary based on specific circumstances.

Package Contents

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is su’ bject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Waming: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference By one or more of the
following measures:

• Reorient or relocate the receiving antenna,
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The devicecan be used in portable exposure condition without restriction.

Important WEEE Information

This symbol on the product(s) and / or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling. please take this product(s) to designated collection points where it will be accepted free of charge.
Disposing of this product correctly will help save valuable resources and environment, which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.
For disposal in countries outside of the European Union
This symbol is only valid in the European Union (EU). If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.

EU Declaration of Conformity

Hereby, Ugreen Group Limited declares that the product is in compliance with Directive 2014/53/EU & 2011/65/EU. Learn more about the EU Declaration of Conformity is available at the following internet address:
https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
Longhua, Shenzhen, China
EU REP: Ugreen Group GmbH
Add: Mannheimer Str. 13, 30880 Laatzen, Germany

Declaration of Conformity

Hereby, Ugreen Group Limited declares that the product is in compliance with Directive UK Radio Equipment Regulations(s! 2017 No.1206)& The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S| 2012 No.3032). Learn more about the GB Declaration of Conformity is available at the following internet address: https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
Longhua, Shenzhen, China
UK REP: Acumen Intemational Business Consultancy Limited
Add: 94 Ock Street, Abingdon, OX14 5DH, UK

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference;
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

A limited 2 year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.

Manuale utente

PAP 22
Raccolta carta

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>