MAGSAAFE15 iPhone 15 Pro Max Torras Sparka Magsafe User Manual
- July 25, 2024
- TORRAS
Table of Contents
MAGSAAFE15 iPhone 15 Pro Max Torras Sparka Magsafe
Product Specifications
- Model NO.: MAGSAAFE15
- Input: DC5V/2A, 9V/2A
- Output: 5W/7.5W/10W/15W
- FCCID: 2BG95-WQ15
Product Usage Instructions
- Wireless Charging Phones: Place the mobile phone with wireless charging capability directly on the charger for charging.
- Non-Wireless Charging Phones: Install a wireless charging receiver on the phone, then place it on the charger for charging.
- Charging Status: When the mobile phone is fully charged, all indicators will go on standby.
Thank you for choosing us!
This wireless charger is very convenient to use, please read the manual
carefully before use, enjoy your experience!
Product Features
- Model NO: MAGSAAFE15
- INPUT: DC5V/2A,9V/2A
- OUTPUT : 5W/7.5W/10W/15W
- FCCID: 2BG95-WQ15
Operation instructions:
- A mobile phone with wireless charging can be placed directly for charging.
- The mobile phone without wireless charging needs to get installed with the wireless charging receiver, then it can also be placed for charging.
- When the mobile phone is fully charged, all the indicators go on standby
Safety in structions
- Do not open or throw it into fire or water to avoid short circuit or leakage.
- Do not use this product in high temperature, moisturizing or corrosive environments to avoid damage to the circuit or leakage.
- Take care of your children and make sure they don’t get an electric shock. This product can not be used as a toy.
Precautions
- Please use a qualified AC adapter. 5W wireless charger can use with 5V/2A AC adapter; it is suggested that 10W fast wireless charger use with QC2.0/QC3.0 fast charging adapter, because insufficient input current may result in unstable charging.
- Do not put metal objects or magnetic cards on the charging pad, which may damage the charger and do not work.
- If this product stops working due to overheating of the receiving coil or charging pad during use, please remove the product. After the product cools down, try charging again.
Safety Instructions
- Avoid Damage: Do not open, expose to fire, or submerge in water to prevent short circuits or leakage.
- Environmental Conditions: Avoid high temperatures, moisture, or corrosive environments to prevent circuit damage or leakage.
- Child Safety: Keep away from children to prevent electric shock. This product is not a toy.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, p ursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in terference will not occur in a particular installation.
If this equipment does cause harmful interfere ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver I s connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 20 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Frequently Asked Questions (FAQ)
Q: Can I charge multiple devices simultaneously?
A: The charger is designed to charge one device at a time for optimal
performance.
Q: Is the charger compatible with all phone models?
A: The charger is compatible with phones that support wireless charging, or
non-wireless phones with a wireless charging receiver installed.
Why the LED indicator keeps flashing, while my mobile phone does not get any charging?
Please make sure that your mobile phone supports wireless charging. Charging position is appropriate. AC adapter is qualified.
Why the charging stops and continues, while the LED indicator flashes?
Your AC adapter charging current is not enough, please use a AC adapter with enough power.
My device is hot while charging, is it normal?
it is normal for the receiving coil and charging pad to get heated during charging
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>