GOLF PWERBASE3 Wireless Charger User Manual
- July 25, 2024
- Golf
Table of Contents
GOLF PWERBASE3 Wireless Charger
Product Usage Instructions
-
Charging a Mobile Phone:
- If your mobile phone has wireless charging capability, simply place it on the charger for charging.
- If your mobile phone does not support wireless charging, you need to install a wireless charging receiver on it before placing it on the charger.
- Once the mobile phone is fully charged, all indicators will go on standby mode.
-
Safety Instructions:
- Avoid opening the charger or exposing it to fire or water to prevent short circuits or leakage.
- Avoid using the charger in high-temperature, humid, or corrosive environments to prevent circuit damage or leakage.
- Keep the charger away from children to prevent electric shock. This product is not a toy.
- This wireless charger offers fast and convenient charging for compatible devices. It supports an input of 5V/2A or 9V/2A and can deliver an output of up to 15W.
Thank you for choosing us! This wireless charger is very convenient to use, please read the manual carefully before use, and enjoy your experience!
Product Features
- Model NO.: PWERBASE3
- INPUT: 5V/2A,9V/2A
- OUTPUT: 15W(MAX)
- FCCID: 2BG95-WQ5MAX
Operation instructions
- A mobile phone with wireless charging can be placed directly for charging.
- The mobile phone without wireless charging needs to get installed with the wireless charging receiver, then it can also be placed for charging. 3. When the mobile phone is fully charged, all the indicators go on standby
Safety in structions
- Do not open or throw it into fire or water to avoid short circuits or leakage.
- Do not use this product in high-temperature, moisturizing, or corrosive environments to avoid damage to the circuit or leakage.
- Take care of your children and make sure they don’t get an electric shock. This product can not be used as a toy.
Precautions
- Please use a qualified AC adapter. A 5W wireless charger can be used with a 5V/2A AC adapter; it is suggested that a 10W fast wireless charger be use with a QC2.0/QC3.0 fast charging adapter, because insufficient input current may results in unstable charging.
- Do not put metal objects or magnetic cards on the charging pad, which may damage the charger and not work.
- If this product stops working due to overheating of the receiving coil or charging pad during use, please remove the product. After the product cools down, try charging again.
FAQs
- Why the LED indicator keeps flashing, while my mobile phone does not get any charging?
- Please make sure that your mobile phone supports wireless charging. The charging position is appropriate. AC adapter is qualified.
- Why the charging stops and continues, while the LED indicator flashes?
- Your AC adapter charging current is not enough, please use an AC adapter with enough power.
- My device is hot while charging, is it normal?
- it is normal for the receiving coil and charging pad to get heated during charging
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver Is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of the device, a distance of 20cm surrounding the device and 20 cm above the top surface of the device must be respected.