INDOOR GOLF Shop SIG12 ENCLOSURE Simulator Installation Guide
- June 2, 2024
- INDOOR GOLF Shop
Table of Contents
SIG12 ENCLOSURE Simulator
“`html
Specifications
-
Product Name: SIG12 Enclosure
-
Enclosure Dimensions: (H) 9’4 x (W) 12’2 x (D)
13’7 -
Recommendations:
- A step-stool or ladder will be needed during assembly.
- It is recommended that an additional person assist in the
assembly of this enclosure.
-
Weight: 130 lbs.
-
Color: Black Surround/Frame, White Impact
Screen -
Screen Viewable Dimensions: Recommended space
requirements (W) 11’5 x (H) 8’7 x (DIAG) 14’3 -
Minimum Space Requirements: Minimum of 14′
width, 20′ length, and 10′ ceiling height
Safety Instructions
-
Pay attention to keeping children, pets, and spectators at a
safe distance during use. -
Take precautions to protect surrounding surfaces and
properties. -
Be aware of your surroundings when swinging clubs or hitting
balls. -
Avoid setting up near heat sources or fire hazards.
-
Store in a cool, dry place away from weather elements and
sunlight when not in use. -
The Indoor Golf Shop is not liable for property damage or
personal injury. -
Ensure all connections are secure to prevent accidents.
-
Avoid hanging from the enclosure.
What’s Included
-
* (18) Color Coded Snap-Button Poles- (1) SIGPRO Premium Impact Screen
- (1) Black Nylon Surround
Overview of SIG12 Enclosure
The SIG12 enclosure is designed for a complete screen display
without white space at the top and bottom. It is made of premium
materials, providing HD quality display and durability against golf
ball impacts up to 250 MPH.
In testing conducted by MyGolfSpy, the SIGPRO Premium Golf
Simulator Impact Screen outperformed competitors in durability,
sound reduction, and bounce back.
Frame Assembly
-
1. Lay out poles and connectors, organizing them by color. - Identify poles with specific markings for assembly.
FAQ
Q: Can the enclosure be used outdoors?
A: The enclosure is designed for indoor use only to ensure
safety and product longevity.
Q: Can the impact screen be replaced?
A: Yes, the impact screen can be replaced if damaged or worn
out. Contact customer support for replacement options.
“`
SIG12
ENCLOSURE
Assembly Guide
THANK YOU
We appreciate you choosing us for your indoor golf needs, and specifically for
your purchase of the SIG12 enclosure and impact screen. We know you will enjoy
this quality product.
You will find everything you need to complete the assembly of your new
enclosure in this guide. You will also find a few helpful tips along the way
that our team of experts has provided to ensure that you have the best indoor
golf experience possible.
We are here for you and happy to help!
TABLE OF CONTENTS
SPECIFICATIONS SAFETY INSTRUCTIONS WHAT’S INCLUDED OVERVIEW OF SIG12 ENCLOSURE FRAME ASSEMBLY ENCLOSURE ASSEMBLY
1 2 3 4 5-11 12-17
SPECIFICATIONS
PRODUCT NAME
SIG12 ENCLOSURE
ENCLOSURE DIMENSIONS (H) 9’4″ x (W) 12’2″ x (D) 13’7″
RECOMMENDATIONS
A STEP-STOOL OR LADDER WILL BE NEEDED DURING ASSEMBLY.
IT IS RECOMMENDED THAT AN ADDITIONAL PERSON ASSIST IN THE ASSEMBLY OF THIS ENCLOSURE.
WEIGHT
130 LBS.
COLOR
BLACK SURROUND/FRAME WHITE IMPACT SCREEN
SCREEN VIEWABLE DIMENSIONS
RECOMMENDED SPACE REQUIREMENTS
(W) 11’5″ x (H) 8’7″ x (DIAG) 14’3″
MINIMUM OF 14′ WIDTH, 20′ LENGTH, AND 10′ CEILING HEIGHT
1
SAFETY INSTRUCTIONS
– Please pay close attention and make sure children, pets, and other
spectators are at a safe distance when swinging a golf club inside the
enclosure.
– Additionally, take every precaution to protect ceilings, walls, windows,
vehicles, and neighboring homes.
– Be alert of where you stand and walk, especially when others are swinging
golf clubs or hitting balls into the screen.
– Make sure the setup is far from gas lines, electric heaters, fireplaces,
candles, or any other source of heat or fire hazard.
– When not in use, store neatly in a cool, dry location, and protected from
weather elements and direct sunlight.
– The Indoor Golf Shop is not responsible for any damage to property and/or
any personal injury.
– Be mindful of disconnected and falling pipe if not snapped/ tightened
properly.
– Do not hang from the enclosure.
2
WHAT’S INCLUDED
SIG12
ENCLOSURE
(18) COLOR CODED SNAP-BUTTON POLES
(1) SIGPRO PREMIUM IMPACT SCREEN
(1) BLACK NYLON SURROUND
(4) FOAM PADDING STRIPS
(2) L-SHAPED CONNECTORS
(6) 3-WAY CONNECTORS
(2) SIDE BARRIER NETS
(90) BALL BUNGEES
3
(2) SANDBAGS
OVERVIEW
SIG12
ENCLOSURE
The SIG12 was designed to allow the image to fill in 100% of the screen,
unlike other enclosure systems where there is white space at the top and
bottom. Constructed of premium materials, your SIG12 golf simulator screen
displays in HD quality and is built tough to withstand golf ball strikes up to
250 MPH.
In independent, head-to-head testing conducted by the team at MyGolfSpy, with
its mission to inform and protect the golf consumer with unbiased data-driven
methods, the SIGPROTM Premium Golf Simulator Impact Screen outperformed what
has been the industry’s most popular impact screen on the market. The results
proved the durability of the new SIGPROTM Premium screen is superior to the
competition, while also delivering reduced sound and bounce back. 4
FRAME ASSEMBLY
1A
Lay out poles and connectors. Organize by color.
(4) WHITE poles with a single stripe on both ends.
(4) BLUE poles with single stripes on one end and double stripes on the
opposite end.
(3) BROWN poles with single stripes on one end and double stripes on the
opposite end.
5
FRAME ASSEMBLY
1B
(4) GREEN poles with single stripes on both ends.
(3) RED poles with single stripes on both ends.
TIP: In the following steps, you will connect the GREEN single stripe end to
the connector pieces. You will connect the RED single stripe ends to the BROWN
double stripe ends.
6
FRAME ASSEMBLY
Assemble the back lower poles first. Attach a RED pole
2
to a BROWN pole. After, attach a 3-way connector to
each end.
RED single stripe
BROWN double stripe
REMEMBER: Connect the double striped end of the BROWN pole to the single striped end of the RED pole. And the 3-way connectors will attach to the single striped end of each pole.
3
Assemble the entire lower section by attaching (2) GREEN poles to the 3-way connectors, and then at-
tach the (2) L-shaped connectors to the ends of the (2)
GREEN poles.
GREEN
7
GREEN
FRAME ASSEMBLY
Connect (4) WHITE poles to the corner connectors
4
that will act as bottom uprights for the structure
TIP: At this point in the assembly, make sure button snaps are fully engaged
in each fitting. Also, this would be a good time to place the structure near
its final location due to the added weight of the screen and surround in
future steps.
8
FRAME ASSEMBLY
Connect (4) BLUE poles to the WHITE uprights to
5
complete the vertical assembly. Next, attach the (4)
remaining 3-way connectors to the open ends of the
BLUE poles.
9
FRAME ASSEMBLY
Start with the back section and attach (1) BROWN pole
6
to the back-right 3-way connector. After, attach (1) RED
pole to the BROWN pole and then attach that RED
pole to the back-left 3-way connector. Repeat these
same steps for the front facing upper section.
10
FRAME ASSEMBLY
To complete the frame structure, attach the (2) re-
7
maining GREEN poles to the open 3-way connectors
at the top.
11
ENCLOSURE ASSEMBLY
In this section, you will attach the black surround to
A
the frame, along with the impact screen. You will need
a ladder and it is recommended to have an additional
person to assist with the following steps.
Unfold the black surround and position it to the outside of the frame.
-
Make sure that the velcro strips of the surround will be facing the inside of the frame.
-
Make sure the grommet holes of the surround are positioned along the back of the frame.
12
ENCLOSURE ASSEMBLY
Unfurl the black surround and bring it over the top of
B
the GREEN pole (with the assistance of another per-
son), and bring the surround across the structure so
that it crosses atop the opposite GREEN pole and then
down the opposite side of the frame.
13
ENCLOSURE ASSEMBLY
C
TIP: Start by connecting the bottom flaps of the black surround by sliding the inside piece under the bottom pole and then folding it up to secure it with the velcro strip.
Now, with the black surround atop the frame, you can
attach it to the frame by pressing the velcro flaps around
the poles. Once securely fastened to the frame locate
all grommet holes at
the back of the struc-
ture and secure with
the bungee balls in
each hole. This will
secure the surround
before attaching the
14
impact screen.
ENCLOSURE ASSEMBLY
D
15
TIP: Before handling the impact screen, wash your hands thoroughly to avoid
blemishes or stains on the white material. And make sure the floor is clean
too.
Begin by using (4) bungee balls to attach the screen to the four corners. The
bungee cord should be threaded through the grommet holes in the screen, then
wrapped around the pole. Make sure the bungee ball is positioned outside of
the enclosure. Repeat the bungee ball attachment through every grommet hole of
the impact screen.
- Some, not all, grommet holes in the screen will match up with grommet holes in the surround.
ENCLOSURE ASSEMBLY
E
The (4) foam pads can now be added to the enclosure. There are (2) long pads that will be attached to the
velcro along the top and bottom of the screen, and
(2) shorter pads that will attach to the two sides of the
screen.
16
ENCLOSURE ASSEMBLY
F
To complete the enclosure and to protect walls, windows, and others from errant golf shots, add the side
barrier netting to the sides of the enclosure. Simply
attach the velcro side of the net along the front poles
and black surround velcro strip.
Start at the bottom with the velcro and run it up the
pole as high as possible. Once attached, the net can be
extend outward and connect to the provided sandbag.
Fill the sandbag with the appropriate amount of sand
that will then keep the side barrier netting extended
17
and taught.
SIG12
ENCLOSURE
ENJOY!
You have now assembled your own indoor golf enclosure and will have, what we
hope, are many years ahead of you to enjoy playing the game we all love with
your family and friends. We stand by our products, so if you are not 100%
satisfied, please contact our team so that we can try and make it right. And
we’re available to help with any questions that you might have about your new
SIG12 enclosure. THANK YOU AGAIN.
CONTACT US 972-848-7491
support@shopindoorgolf.com
LOVE THE GAME … INSIDE & OUT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>