COWAY Airmega AIM Air Purifier fan User Manual

COWAY Airmega AIM Air Purifier fan

SAFETY INFORMATION

Several warnings and precautions are given below to avoid the danger caused by misoperation and make it more convenient to use this device.

1. Do not exceed the voltage and power rating of the power outlet or connection device. This may generate excessive heat and cause electric shock or fire.

2. Only use the appropriate type of electric socket for the product. Connecting the product to an incorrect socket may result in damage.

3. Do not immerse the product or any of its parts in water. Operate the product only after a qualified technical examination and replace the underwater parts.

4. Do not touch the power plug with wet hands.

5. If the electric outlet is wet, do not connect the power plug to the product. Wait till the electric outlet dries completely before use.

6. Do not operate the product if the motor fan fails to operate or is damaged.

7. Disconnect the power plug from the electric outlet if strange sounds, smells, or smoke come from the product. Contact the customer service center immediately for instructions.

8. Disconnect the power plug from the electric outlet when the product is not in use and before cleaning, inspecting, or replacing parts.

9. Use a dedicated electric outlet for the product. Do not connect the product to a power strip that has connections to several other products.

10. Do not operate the product if the power plug or cords are damaged.

11. Do not forcibly bend, twist, pinch, or damage the power cord.

12. Do not force the power plug into an incorrect electric outlet or a loose electric outlet. Contact a qualified technician to install a proper electric outlet.

13. A damaged power plug or cord must be replaced by the manufacturer or a qualified technician

14. Remove the power plug from the electric outlet by grasping the power plug and pulling it gently. Never pull the cord to remove the power plug.

15. Keep the electric cord away from heat sources.

16. Do not repair the product unless this manual recommends it. Doing so will void your warranty. All repair work must be carried out by a qualified technician.

17. This product has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

18. Do not use this product in industrial areas or factories where oil, grease, or dust particles may be present. This product is for household use only.

19. Do not change the filter while the product is operating. Always turn off the product and unplug the power plug before accessing the components inside the product.

20. Do not place the product near a humidifier or in humid areas, such as bathrooms or laundry rooms, where the product may come into contact with water.

21. Do not place the product near flammable gases, cigarettes, incense, and other combustible materials.

22. Do not place the product on a bed or against soft objects, such as curtains.

23. Do not clean the product using detergents, paint thinner, or other household solvents.

24. Do not spray insecticides or other flammable materials near the product.

25. This product should not be used by children under 8 without supervision.

26. This appliance is not intended for use by persons(including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

27. Children should be supervised to ensure that they do not play with the appliance.

28. WARNING : To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.

29. Do not use an adapter or extension cord, as it may cause fire, shock, or personal injury.

30. Do not use attachments or filters not recommended by the manufacturer.

31. Exercise caution while removing the components from the product. Ensure that your body parts do not get stuck or scratched while servicing the product.

32. Do not insert any objects or fingers into the openings of the product. If any objects fall into the openings, immediately turn off the product and unplug the power plug. Contact a qualified technician or the manufacturer to remove the object.

33. Do not wash or reuse the Max2 filter.

34.  Do not block the air outlet of the product. Doing so may decrease the efficiency of the product and increase the risk of injury.

35. This product is for household use as described in this manual. Using it in an industrial environment or any other place is not recommended by the manufacturer and may result in electric shock, fire, and injury to a person.

36. Do not place anything on top of the product.

37. Do not run the power cord under carpets or cover it with rugs.

38. Change the filters at the recommended intervals so that excess dust does not accumulate.

39. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and
    the product should be discarded or returned to an authorized service facility for examination and/or repair.

40. Do not operate any fan with a damaged cord or plug. Discard the fan or return it to an authorized service facility for examination and/or repair.

41. Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.

42. WARNING : Chemical burn hazard. Keep batteries away from children.

43.  Do not place the product where both sides of the product are blocked.

44. Do not place the product in direct sunlight.

45. Do not place the product next to or on windows.

46. Place the product on a firm, flat, and dry surface that provides sufficient air circulation.

47. Keep the product and its cord out of the way, where it cannot be stepped on or tripped over.

48. 48. The end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated.

49.  Operation is subject to the following two conditions:

    • this device may not cause harmful interference and
    • this device must accept any interference received, including interference that may cause undesired operation.

50. Do not ingest battery, Chemical Burn Hazard;

    • This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death;
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
    • The batteries contain materials, which are hazardous to the environment; they must be removed from the appliance before it is scrapped and that they are disposed of safely.

FEATURE HIGHLIGHTS

1. Electronic buttons;
2. Three airflow speed levels;
3. With IR remote control function;
4.  Light-off function by control panel or remote control;
5. Oscillation: horizontal automatically 80°, vertical oscillation by hand with five angles: -15°, 0°, 30°, 60°, 90°;
6. 1-24 hours timing and pre-setting;
7. AI Air quality detection and intelligent purification (AI purification): the default is high speed; after one minute of air quality detection with high speed, it will switch to a high level if the color is red, to a middle level if the color is yellow, and to a low level if the color is green.
8. Filter replacement reset button;
9. All lights will dim to 30% without operation in 1 minute (except for the tricolor light)

PARTS DIAGRAM

Check the parts of the product (exterior in the front and top view and control panel) and how they function.

Exterior

Check the parts and functions of the exterior of the product.

Control Panel

Remote Control

USE OF EACH FUNCTION BUTTON

After plugging in the power supply, the power-on sound “Bi~Bi~” will be emitted and enter the standby state, and all function indicators will not light up. Except for the Power Button and the Timer Button, other buttons are invalid

Power Button

1. After power-on in the standby state, press the Power Button to turn on the power. The default state of power-on is:
   • Fan: low-level airflow speed, a display panel has no display.
   • Oscillation Off.
   • Timer: No.
   • Auto mode: Off

Oscillation Button

Press the Oscillation Button to start and stop the oscillation function.

Airflow Speed Button

• Press the Airflow Speed Button to increase and decrease the airflow speed.
  • Level 1→ Level 2 → Level 3
• The Airflow speed indicator is shown on the control panel corresponding to the set speed

Timer (+) Button

1. In the power-on state, press the Timer Button to reset the schedule function. The timer range is 0-24 hours, displayed on the display panel. (00 means no timer set)In the power-on state, press the button , the LED flashes and displays the current set timer, and the LED “h”  lights up, which is the timer setting state; press the button power again, and the set working time is increased by 1 hour, the timer indicator lights up and Display panel shows corresponding digits. Press and hold the button for more than 2 seconds to increase the time rapidly and the display changes accordingly.
2. In the standby state, press the timer/presetting button to set the scheduled start time.  The timer range is 0-24 hours, which is incremented by hours and displayed. In the standby state, press the button , the LED flashes, and the LED “h” lights up, which is the timer setting state; press the button again to adjust the scheduled time up, and the adjustment does not cycle. During the setting process, LED flashes to display the currently set time; wait for 3 seconds to set the scheduled time successfully.

After plugging in the power supply, the power-on sound “Bi~Bi~” will be emitted and enter the standby state, and all function indicators will not light up. Except for the Power Button and the Timer Button, other buttons are invalid.

Timer (-) Button

1. In the power-on state, press the Timer Button to reset the schedule function. The timer range is 0-24 hours, displayed on the display panel. (00 means no timer set) In the power-on state, press the button, the LED flashes and displays the current set timer, and the LED “h” lights up, which is the timer setting state; press the button again, and the set working time is reduced by 1 hour, the timer indicator lights up and the display panel displays the corresponding digits. Press and hold the for more than 2 seconds to reduce the time rapidly and the display changes accordingly.
2. In the standby state, when the presetting function has been turned on, press the button to adjust the scheduled time down, and the adjustment will not cycle. When it is adjusted to “00”, the timer function will be canceled. During the setting process, LED flashes to display the currently set time; wait for 3 seconds to set the scheduled time successfully.

Auto Mode Button

1. In the power-on state, press the button to turn on or off the auto mode function, and the LED “AUTO” lights up when it is turned on.
2. The product automatically adjusts the airflow speed (Levels 1, 2, and 3) for efficient operation depending on the indoor air quality detected by the sensor. The product requires 60 seconds to calibrate the sensors. The mode is intended for general users’ convenience.
3. The air quality sensor will automatically adjust the fan speed along with the color indicator on the control panel.
   • Green – healthy
   • Yellow – moderate
   • Red – unhealthy
4. Press the button to turn on/off the LED on the display panel.

Filter Replacement Reset Button

will pop up on the display panel when it’s time to replace the filter. After replacing the filter, press and hold the for 3 seconds to reset the filter replacement indicator.

Child Lock Function

In the power-on state or schedule state, the fan enters the child-lock mode when you press and hold “ for 3 seconds, the LED light on, and all buttons will be locked. In the child-lock state, press and hold again for 3 seconds to cancel the child-lock mode. the LED light off. The child lock is automatically released after automatic shutdown

Coway Smart Features

1. Auto-dim display: The display panel will auto-dim until further action when the unit is idle for one minute.
2. Last setting memory: When the fan is turned on for the second time or more, it will resume its previous settings (excluding the timer) before the product is shut off.

USE OF REMOTE CONTROL

Open the battery cover and replace the battery

How to open the battery cover: first press and hold in the direction of arrow 1 in the figure to release the upper snap of the battery cover, and then pull it out in the direction of arrow 2.  When using, please align the position of the receiver. Hold and press the latch as shown in the left diagram to release the battery.

Remove the battery

Please make sure to use the correct coin battery, CR2032 3V

When replacing the battery, please pay attention to the polarity, and then put away the battery cover.

• The battery shall be disposed of properly, including keeping them away from children; and
• Even used batteries may cause injury

CLEANING OF BODY SURFACE

1. Before cleaning the product, please be sure to turn off the power and unplug the machine.
2. When the exterior is dirty, use a dry cloth. Do not use detergents that contain solvents, thinners, bleach, chlorine, or abrasives.
3. Place the product in a well-ventilated shade

FILTER INSTALLATION INSTRUCTIONS

1. How to open and close the rear cover.
   • Grab the handle and turn clockwise to close and turn counterclockwise to open the rear cover.
2. Install the filter
   • Please take the used filter out and replace it with a new filter.

FUSE REPLACEMENT

1. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord. (A)
2. Open the fuse (B) by sliding the fuse cover on the top of the plug towards the blades
3. Remove fuse (C) carefully by gently prying out the ends of the fuse from the receptacle.
4. Risk of fire. Replace the fuse only with 2.5 Amp, 125 Volt fuse. Gently install a replacement fuse back into the pins that will hold it in place. (D)
5. Close fuse cover (E) by sliding the fuse cover back over the fuse box in the plug until it is completely closed.
6. Plug the fan back in and resume use.

SPECIFICATION

The specification is subject to minor changes to improve the product performance

ENVIRONMENTAL PROTECTION

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

LIMITED WARRANTY

ARBITRATION NOTICE

THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT REQUIRES YOU AND COWAY TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN COURT UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW. Should the motor or other electronic parts of Coway’s product fail due to a defect in materials or workmanship under normal home use, during the warranty period set forth below, Coway will at its option repair or replace the part and/or the product. This limited warranty is valid only to the original retail purchaser of the product and applies only when purchased and used within the United States, Canada, and Mexico. Proof of original retail purchase and the video of the issue is required to obtain warranty service under this Limited Warranty.

Filter excluded

Three(3) years from the date of the original retail purchase| Motor and electronic parts|

• Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater.
•  Replacement products and parts may be new or remanufactured.

THIS WARRANTY IS INSTEAD OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW,  IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED ON CONTRACT, TORT, OR OTHERWISE. Some states, provinces, or countries do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts. Therefore, the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

THIS LIMITED WARRANTY DOES NOT COVER

• Service trips to deliver, pick up, or install or repair the product; instruction to the customer on operation of the product; repair or replacement of fuses or correction of wiring or plumbing, or correction of unauthorized repairs/installation.
• Failure of the product to perform during power failures and interrupted or inadequate electrical service.
• Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply, or inadequate supply of air
• Damage resulting from operating the product in a corrosive atmosphere or contrary to the instructions outlined in the owner’s manual of the product.
• Damage to the product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of God.
• Damage or failure caused by unauthorized modification alteration, or use for other than the intended purpose.
• Damage or failure of fan caused during the shipment or by misuse of the customer.
• Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or industrial use, or use of accessories,  components, or consumable cleaning products that are not approved by Coway.
• Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the finish of your product, unless such damage results from defects in materials or workmanship on the motor or other electronic parts and is reported within one (1) week of delivery.
• Damage or missing items to any display, open box, discounted, or refurbished product.
• Products with original serial numbers that have been removed, altered, or cannot be readily determined. Model and serial numbers, along with original retail sales receipts, are required for warranty validation.
•  Increases in utility costs and additional utility expenses.
•  Repairs when the product is used for other than normal household use (e.g., commercial use, in offices, and recreational facilities) or contrary to the instructions outlined in the product’s owner’s manual.
• Costs associated with removal of the product from your home for repairs.
• The removal and reinstallation of the product if it is installed in an inaccessible location or is not installed by published installation instructions, including the owner’s and installation manuals of Coway.
• Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes the use of parts not approved or specified by Coway.
• The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.

TO OBTAIN WARRANTY SERVICE

Please contact Coway at 1-800-285-0982 between 7 AM – 8 PM CST, Monday through Friday, to speak with an authorized representative of Coway. Your warranty claim file will be opened, and you will be instructed to send the proof of purchase, video footage showing the alleged defect, and the product to the address designated by the representative. Within 45   days from its receipt of said proof, video footage, and the product, Coway will either

• send you the repaired or replaced product at no charge to you
• send you your original product at your cost if your warranty claim is denied,  which will be promptly notified by Coway.

THE PROOF OF PURCHASE, VIDEO FOOTAGE, AND THE PRODUCT SHALL BE RECEIVED BY COWAY WITHIN 30 DAYS AFTER YOUR WARRANTY CLAIM FILE IS OPENED

For additional product information, please visit Coway’s website at https://cowaymega.com/ For further assistance, please write: Coway USA, Inc. 4221 Wilshire Blvd., STE 210 Los Angeles, CA 90010

PROCEDURE FOR RESOLVING DISPUTES

• ALL DISPUTES BETWEEN YOU AND COWAY ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH
• BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION MEANS THAT YOU AND COWAY  ARE EACH WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION.

Definitions

For this section, references to “Coway” mean Coway USA, Inc., its parents, subsidiaries, and affiliates, and each of their officers, directors, employees, agents, beneficiaries, predecessors in interest, successors, assigns, and suppliers; references to “dispute” or “claim” shall include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, regulation,    ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or relating in any way to the sale, condition or performance of the product or this Limited Warranty.

Notice of Dispute

In the event you intend to commence an arbitration proceeding, you must first notify Coway in writing at least 30 days in advance of initiating the arbitration by sending a letter to Coway at Coway USA, Inc., Attn: LegalDepartment- Arbitration, 4221 Wilshire Blvd., STE 210, Los Angeles, CA 90010. You and Coway agree to engage in good faith discussions in an attempt to amicably resolve your claim. The notice must provide your name, address, and telephone number; identify the product that is the subject of the claim; and describe the nature of the claim and the relief being sought. If you and Coway are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration Agreement to Binding Arbitration and Class

Action Waiver

Upon failure to resolve the dispute during the 30 days after sending written notice to Coway, you and Coway agree to resolve any claims between us only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute between you and Coway shall not be combined or consolidated with a dispute involving any other person’s or entity’s product or claim. More specifically, without limitation of the foregoing, any dispute between you and Coway shall not under any circumstances proceed as part of a class or representative action. Instead of arbitration, either party may bring an individual action in small claims court, but that small claims court action may not be brought on a class or representative basis.

Arbitration Rules and Procedures

To begin arbitration of a claim, either you or Coway must make a written demand for arbitration. The arbitration will be administered by the American Arbitration Association (“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules that are in effect at the time the arbitration is initiated (referred to as the “AAA Rules”) and under the procedures outlined in this section. The AAA  Rules are available online at www.adr.org/consumer. Send a copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner described in the AAA Rules. You must also send a copy of your written demand to Coway at Coway USA, Inc., Attn: Legal Department- Arbitration, 4221 Wilshire Blvd., STE 210, Los Angeles, CA 90010. If there is a conflict between the AAA Rules and the rules outlined in this section, the rules outlined in this section will govern. This arbitration provision is governed by the Federal Arbitration Act. Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide, except that issues relating to the scope and enforceability of the arbitration provision and the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this provision.

Governing Law

The law of of the state of your residence shall govern this Limited Warranty and any disputes between us except to the extent that such law is preempted by or inconsistent with applicable federal law. Fees/Costs. If you prevail in the arbitration, Coway will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator can award them to the same extent that a court would. If the arbitrator finds either the substance of your claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by the standards outlined in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will be governed by the AAA Rules. In such a situation,  you agree to reimburse Coway for all monies previously disbursed by it which are otherwise obligated to pay under the AAA Rules

Hearings and Location

If your claim is for $25,000 or less, you may choose to have the arbitration conducted solely based on

1. documents submitted to the arbitrator
2. through a telephonic hearing, or
3. by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a location within the federal judicial district in which you reside unless we both agree to another location or we agree to a telephonic arbitration.

Opt-Out

You may opt out of this dispute resolution procedure. If you opt-out, neither you nor Coway can require the other to participate in an arbitration proceeding. To opt out, you must send notice to Coway no later than 30 calendar days from the date of the first consumer’s purchase of the product by either: sending an e-mail to support@coway-usa.com with the subject line: “Arbitration Opt Out” or calling 1-800-285-0982. You must include in the opt-out e-mail or provide by telephone: your name and address; the date on which the product was purchased; the product model name or model number; and the serial number (the serial number can be found on the product. You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail or telephone); no other form of notice will be effective to opt out of this resolution procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and do not oopt- outtheyouacceptalltermsandconditionsofthearbitrationprovision described above.

FAQs

BEFORE USING THE PRODUCT

What is the primary function of the COWAY Airmega AIM?

The primary function of the COWAY Airmega AIM is to purify the air and provide a cooling fan effect, enhancing indoor air quality and comfort.

How does the COWAY Airmega AIM improve air quality?

The COWAY Airmega AIM improves air quality by using a HEPA filter to capture airborne particles, allergens, and pollutants.

What type of filter does the COWAY Airmega AIM use?

The COWAY Airmega AIM uses a True HEPA filter combined with an activated carbon filter to effectively remove contaminants from the air.

How many fan speeds are available on the COWAY Airmega AIM?

The COWAY Airmega AIM offers multiple fan speeds, typically including low, medium, high, and auto settings.

How often should the filters be replaced in the COWAY Airmega AIM?

The filters in the COWAY Airmega AIM should typically be replaced every 6 to 12 months, depending on usage and air quality.

The filters in the COWAY Airmega AIM should typically be replaced every 6 to 12 months, depending on usage and air quality.

The COWAY Airmega AIM operates at a noise level that varies with the fan speed, generally ranging from 24 dB to 52 dB.

What kind of maintenance does the COWAY Airmega AIM require?

Regular maintenance of the COWAY Airmega AIM involves cleaning the pre-filter every 2-4 weeks and replacing the HEPA and carbon filters as needed.

How does the COWAY Airmega AIM compare to other air purifiers?

The COWAY Airmega AIM stands out due to its dual functionality as an air purifier and fan, combined with advanced filtration and smart features, making it a versatile and effective choice.

What is the main function of the COWAY Airmega AIM?

The COWAY Airmega AIM is designed to purify air by capturing dust, allergens, pet hair, and other pollutants using a powerful 3-stage filtration system.

What materials are used in the construction of the COWAY Airmega AIM?

The COWAY Airmega AIM is constructed with durable materials designed to withstand regular use while ensuring effective air purification

What types of odors can the COWAY Airmega AIM eliminate?

The COWAY Airmega AIM is effective at removing bad odors, including pet odors, smoke, and volatile organic compounds (VOCs)

Video-COWAY Airmega AIM Air Purifier fan

Download this pdf:COWAY Airmega AIM Air Purifier fan user manual

Reference link

COWAY Airmega AIM Air Purifier fan User Manual-device report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>