SIMMONS SP154560B ProHunter Spotting Scope Owner’s Manual
- July 24, 2024
- SIMMONS
Table of Contents
SIMMONS SP154560B ProHunter Spotting Scope
Product Usage Instructions
- Unfold the tripod legs and place it on a stable surface.
- Ensure the tripod is level and securely attached.
- Attach the scope’s mounting base securely to the tripod platform.
- Adjust the tilt of the tripod head to your preference.
- Do not attempt to remove the zoom eyepiece from the scope as it is not interchangeable. Adjust the magnification ring for the desired zoom level and use the focus dial to focus on objects.
- To pan the scope, loosen the locks, unlock the pan arm, move the scope as needed, and then lock it back in place by tightening the locks.
- If you wear eyeglasses, adjust the rubber eyecup accordingly for better viewing. Return the eyecup to its extended position after use to maintain its shape.
- Your spotting scope is waterproof and fogproof. Do not disassemble it. The O-ring seal provides moisture protection, and dry nitrogen purging ensures fogproof performance.
FAQ
- Q: Can I disassemble my spotting scope for cleaning?
- A: No, disassembling your spotting scope can result in irreparable damage. It is recommended not to attempt cleaning beyond the general care instructions provided in the manual.
- Q: Can I use this spotting scope for stargazing?
- A: While this spotting scope is primarily designed for terrestrial viewing, it can also be used for basic stargazing purposes.
Features
You’ve made the right decision by choosing the Simmons ProHunter Spotting Scope!
This manual will help you optimize your viewing experience by explaining how
to utilize the scope’s controls and features and how to care for it. Read the
instructions carefully before using your spotting scope.
Dawn and dusk are often the most important times on a hunt. Simmons® Spotting
Scopes bring sharp, bright images, especially during critical times. The fully
multi-coated optics transmit maximum light to the eyepiece, which is crucial
in those critical low-light conditions. Simmons® Spotting Scopes are the
complete package, priced for every hunter. A tabletop tripod, car window
mount, hard carrying case, and soft carrying case are included.
WARNING: DO NOT LOOK AT THE SUN THROUGH THE OPTICS, AS PERMANENT EYE DAMAGE OR EVEN BLINDNESS MAY RESULT.
PARTS GUIDE
- Ocular Lens
- Objective Lens
- Magnification Ring
- Focus Dial
Accessories Included
- A. Tabletop Tripod
- B. Removable Car Window Mount
- C. Hard Case
- D. Soft Case
- E. Lens Covers
MOUNTING THE SCOPE AND SETTING UP THE TRIPOD
- Unfold the legs fully and set the tripod on a stable, level surface such as a table or the ground.
- Make sure the upper section of the tripod is level and securely attached to the top plate of the lower section, by tightening the C-clamp bolt.
- Turn the mounting screw knob to attach the scope’s mounting base securely to the tripod platform. Do not over-tighten.
- Twist the pan/tilt handle counter-clockwise to loosen it, tilt the tripod head until the mounting platform is level with the ground, then twist the handle clockwise to tighten it.
- To tilt the scope vertically, twist the pan/tilt handle counter-clockwise to loosen it first, then tilt the tripod head up or down. To pan the scope left or right, use the pan/tilt handle to rotate the tripod platform. To raise or lower the center column, loosen the column lock, slide the column to the desired height, and retighten the column lock knob.
- The top section of the tripod may also be used as a car window mount. Loosen the C-clamp bolt, and remove the top section from the tripod plate. Roll down your window partially, leaving enough of it up to place the C-clamp on, with the bolt knob facing you. Tighten the bolt knob to secure the mount in place, being careful not to cause damage to the window (avoid using the mount on windows with significant curvature).
- After installing the mount on the window, attach the scope to the tripod platform with the mounting screw. Loosen and adjust the pan/tilt handle to point the scope as needed, then tighten it.
USING THE ZOOM EYEPIECE AND FOCUSING
- Rotate the magnification ring (3) on the eyepiece to change the magnifying power from low to high. Lower power settings will provide a brighter image with a wider field of view; higher powers allow observing smaller details on more distant subjects.
- Turn the focus dial (4) in either direction until your subject appears as sharp as possible. To reduce the need to readjust focus when zooming, set the zoom to its highest power and focus on your subject. When you zoom back down to lower powers, it will stay in focus.
Note: the zoom eyepiece is not interchangeable. Do not attempt to remove it from the scope.
USING THE PAN ARM TO MOVE THE SCOPE
To pan the scope side to side or up and down, first loosen the side and/or
vertical lock. Then, unlock the pan arm by rotating it counterclockwise and
use it to move the scope as desired. To lock the scope in place, rotate the
pan arm clockwise and tighten the side/vertical locks.
USING THE EYECUP
If you wear eyeglasses, fold down the rubber eyecup if you have difficulty
seeing the entire image. After use, return the eyecup to the fully extended
position before storing the scope to ensure that the rubber in the eyecup
retains its normal shape and flexibility.
WATERPROOF / FOGPROOF
- Your Simmons ProHunter spotting scope has been designed and built utilizing the latest waterproof and fogproof technology.
- The scope is O-ring sealed for complete moisture protection. Fogproof protection is achieved from dry nitrogen purging that removes all internal air, which can retain moisture.
NEVER DISASSEMBLE YOUR SPOTTING SCOPE. SPECIAL TOOLS AND EQUIPMENT ARE REQUIRED FOR SERVICE AND IRREPARABLE DAMAGE CAN RESULT FROM REPAIR ATTEMPTS BY UNTRAINED PERSONS. UNAUTHORIZED SERVICE MAY ALSO VOID THE WARRANTY.
TECHNICAL SPECIFICATIONS
SKU| Field of View @ 1000 yds| EYE RELIEF| EXIT PUPIL|
CLOSE FOCUS| WEIGHT (OZ/G)| LENGTH (IN/MM)
---|---|---|---|---|---|---
15-45x60mm| 60 – 110ft/20 – 36m| 13 – 16mm| 1.3 – 4mm| 28 – 32ft| 31.7oz /
900g| 13.8in / 350mm
20-60x60mm| 50 – 100ft/17 – 33m| 13 – 17mm| 1 – 3mm| 28 – 30ft| 31oz / 880g|
13.8in / 350mm
CLEANING AND GENERAL CARE
The lenses of your Simmons Venture spotting scope are fully multi-coated for the highest light transmission. As with any multicoated optics, special care must be taken in cleaning the lenses. Follow these tips for proper lens cleaning:
- Blow away any dust or debris on the lens (or use a soft lens brush).
- To remove dirt or fingerprints, clean with the supplied microfiber cloth rubbing in a circular motion. The use of coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.
- For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.
Never disassemble your spotting scope. Irreparable damage can result from unauthorized service attempts, which also void the warranty.
WARRANTY
SIMMONS LIFETIME LIMITED WARRANTY
All Simmons products are engineered to deliver to your expectations and
manufactured to withstand the rigors of the outdoors for the lifetime of the
product. If our product fails you, we will stand behind it and repair it at no
cost to you. If we can’t repair the product then we will replace it with a
product of equal or better value. No receipt is required and fully
transferable.
*All Simmons® products carry a limited warranty against defects in workmanship or materials. Product lifetime is defined as 30 years for Riflescopes, 20 years for binoculars and spotters, and 5 years for electro-optics and electronic components (laser rangefinders, tube red dots, and reflex sights). Coverage period start date is determined by proof of purchase or manufacturing date of the product. This warranty does not cover cosmetic damage; damage caused by failing to properly maintain the product; loss; theft; damage as a result of unauthorized repair, modification, or disassembly; or intentional damage, misuse, or abuse. This Warranty will be void if the date stamp or other serialization codes have been removed from the Product. We may replace your product with a product of equal or better physical condition.
How can I request service under my warranty?
No receipt, warranty card, or product registration is required to assert a
Warranty claim. All claims must be submitted within the Warranty Period
outlined in the Product Manual. USA & CANADA RETURNS: If you believe your
request falls within the outlined warranty period, please call us at
1-800-423-3537 or send us a message
through our Contact Form and we will help to resolve any issue.
CONTACT
- ©2024 Simmons Optics
- Simmons,™, ®, denote trademarks of Simmons Optics
- www.simmonsoptics.com
- 22101 W. 167th St., Olathe, KS 66062