Waterdrop WD-SF02-SL, WD-SF02-SR Vitamin C Showerhead Water Filter System User Manual
- July 23, 2024
- Waterdrop
Table of Contents
Waterdrop WD-SF02-SL, WD-SF02-SR Vitamin C Showerhead Water Filter
System
WaterdrOp
Filter Better Live Healthier
Qingdao Ecopure Filter Co., Ltd.
Tel: l-888-352-3558 (U.S.)
E-mail:
beautycare@waterdropfilter.com
WaterdrOp
Vitamin C Showerhead Water Filter System
User Manual
WD-SF02-SL/WD-SF02-SR
Product introduction
This product adopts soft water filter element for filtration, which can effectively intercept large particles of impurities, red worms and moss in municipal tap water, and strongly adsorb residual chlorine in water, so as to achieve the effect of removing residual chlorine. Using Vitamin C filter element: brightening skin, hydrating and moisturizing, vitamin C protects skin to slow down oxidation and keep skin elastic. To provide you with safe and healthy bathing water.
Precautions for use
- If not used for more than a week, please remove the Vitamin C filter and softner fiber filter from the shower head, shake the moisture inside, cover the lid for storage, or place in the refrigerator.
- Please do not drink water from the rain shower. If accidentally drink, please gargle immediately. If there is any abnormality, consult a professional doctor. Do not use this product in a bathtub or bath filled with hot water.
- Please use the water temperature in the range of 35°C-45°C. If used in high temperature hot water above 45°C, the use time of Vitamin C filter element becomes extremely short, resulting in blockage; If used at a low temperature below 35°C, it may lead to the deterioration of the melting of the Vitamin C core, resulting in a weaker body sensitivity.
- Rinse the room (mirror, glass, floor, etc.) with clean water after use.
- Do not use steel balls, abrasive cleaners or corrosive liquids to clean the product, which may cause the product to break, leak, discolor or distort.
- Service life varies according to usage, service temperature, storage temperature, and water pressure in each home.
- When the tap water is lower than 0.lMPa, the performance of the product will be affected, including the water flow rate and water shape, etc. It is recommended to use under working pressure.
Installation instructions
- Turn the shower head handle counterclockwise, open the shower head handle, remove the soft water filter cover, and tighten the filter head handle.
- Turn counterclockwise to open the transparent filter cover, tear off the Vitamin C filter cover, put the Vitamin C filter logo outward into the bin, and tighten the transparent filter cover clockwise.
- Tighten the connection between the water outlet of the shower soft water pipe (user’s own) and the shower water inlet.
- Open the faucet of the water mixing valve, check whether there is leakage at each connection, close the faucet, so that the installation is complete.
Tip: When water leaks after the shower head is installed, it may be that the hose thread does not match the shower head mount. Please add a washer inside the hose thread after step 3 to ensure that the shower head and hose mount are sealed.
Product parameter
- Product model: WD-SF02-SUWD-SF02-SR
- Soft water filter model: WD-SFR-02S
- Soft water filter life: 3 months
- Vitamin C filter model: WD-SFR-03/WD-SFR-04
- Vitamin C filter life: l month
- Product size: 100x58x289mm
- Product weight: 328g
- Working pressure: 0.l-0.4MPa
- Applicable water temperature: 5-45° C
Fault diagnosis and troubleshooting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>