UGREEN 40234 HDMI Switch 3 in 1 Out HDMI Splitter Instruction Manual
- June 16, 2024
- UGREEN
Table of Contents
**UGREEN 40234 HDMI Switch 3 in 1 Out HDMI Splitter Instruction Manual
**
Thank you for purchasing the UGREEN products. For optimum operation, please read this instruction carefully before use.
Product Details
- Select Button
- HDMI Output
- HDMI Input 1
- HDMI Input 2
- HDMI Input 3
- Micro USB Power Supply Port
- IR Remote Controller Jack
- Power LED Indicator
- Input Indicators
- IR Receiver Extender Cable
- IR Remote Control
How IT Works
Connection
Step 1 Connect your source devices to the input ports of the HDMI switch with HDMI cables (maximum length 5m supported). It can sense input ports automatically and the corresponding input indication LEDs (Blue) will be light on.
Step 2 Connect your HD display device to the output port of the HDMI switch with HDMI cable (maximum length 10m supported).
Step 3 Plug IR receiver extender cable to the HDMI Switch.
Step 4 Connect power supply with Micro USB cable for power hungry devices such as Blu-ray players, Xbox 360, and PS3/4.
Notes
- Supports maximum length 15m HDMI cables connection between source devices and display device. (HDMI cable is not included)
- It is recommended to use HDMI cables compliant with 1.4 or higher specification for high performance.
- Step 3 and step 4 cannot be reversed.
OPERATION
-
Input selection with the Remote Control—There are direct input selection buttons on the remote controller (Buttons 1, 2 and 3). Pressing each button selects the corresponding HDMI INPUT port or you can use “Next” button to toggle between sources.
Note Please remove the transparent film located at the bottom battery position before you use the remote control. -
Input selection manually —You can press the round button on the panel of the HDMI switch. Each press of the button progresses to the next active HDMI INPUT. Signal from the selected HDMI INPUT is sent to the OUTPUT port and its corresponding HDMI Input Indicator is illuminated in blue.
Note The HDMI Input Indicator is not lit when there is no input signal or no HDMI cable is connected.