COSTWAY NP10215 Snow Rake User Manual
- June 17, 2024
- COSTWAY
Table of Contents
COSTWAY NP10215 Snow Rake User Manual
Please give usa chance to make it right and do better
Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP
- Please read all instructions carefully.
- Retain instructions far future reference, Separate and count all parts and hardware.
- Read through each step carefully and follow the proper arder.
- We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Always piace the product on a flat, steady and stable surface.
- Keep all small parts and packaging materials far this product away from babies and children as they potentially pose a serious choking hazard.
Know Your Roof Rake
- Rauf rake head
- Metal braces (2)
- Pale adapter
- Handle grip
- Pale handle
- Pale extensions ( 4)
- Lang belt
- Short belts (2)
- Nut (1)
- Hex wrench
- Open wrench
Roof Rake Head Assembly
The assembly of the roof rake head requires hardware (the nut and bolts) included in the pack. Use the equipped open wrench for the nut and the hex wrench for bolts. Make sure to tighten the hardware connections far a secure assembly.
Fig. 1
Depress the sma/1 buttons on the pote adapter and insert the poet adapter
into the connector on the back of the roof rake head. Push firmly unit! the
two soma/1 buttons pop up in the ho/es on the connector (Fig. 1).
Fig. 2
Align the holes of the metal braces with the hole on the end of the po/e
adapter. Secure them with the long bolt and one nut (Fig. 2)
Fig. 3
Connect the metal braces to the rake head with 2 sma/1 bolts as shown (
Fig. 3).
Connecting the Poles
Fig. 4
To connect the roof rake head assembly with the po/e handle, depress the
sma/1 button at the end of the po/e handle and insert it into the end of the
po/e adapter. Make sure the sma/1 button pops up in the ho/e on the po/e
adapter so the assembly is secured (Fig. 4).
Fig. 5
If additional reach is needed, connect the provided po/e extensions between
the po/e handle and the rake head assembly. Make sure the sma/1 buttons pop up
in the ho/e on the po/e so the assembly is secured (Fig. 5).
NOTE: Make sure the pale handle is the last piece af the assembly.
NOTE: Only connect the minimum number of pole extensions needed to reach
the roof. This will minimize the weight of the roof rake and reduce the effort
required.