HELLA Built In Roller Shutters and Outdoor Blinds Instruction Manual
- July 23, 2024
- HELLA
Table of Contents
HELLA Built In Roller Shutters and Outdoor Blinds
Product Usage Instructions
- Installation:
- Ensure all measurements are indicated in mm from left to right. Install according to the specific type and color indicated.
- Mounting Base:
- Choose the appropriate mounting base type based on the surface – Wood, Brick/Concrete, Plastic, Metal, Plasticaluminium, or Woodaluminium.
- Custom Models:
- For ERO models, choose between Flush-mounted (without an entry guide) or Surface-mounted (with an entry guide). Ensure proper insulation and sealing according to width specifications. For AR models, select the appropriate sealing profile and installation details as required.
- Guide Rail Lengthening:
- Specify the guide rail lengthening in mm according to the clear height. Armored profiles and slat types are specified for ERO and AR models respectively.
- Sealing Tape:
- Ensure proper sealing tape for driving rain seal on guide rails for ERO that are closed at the rear.
- The guide rails are designed for built-in roller shutters (ERO) and outdoor blinds / exterior Venetian blinds (AR). All specifications must be indicated in mm seen from the inside from the left to the right. If no information is given, the standard design is selected.
FAQs
- Q: Can I install the guide rails without the sealing profile?
- A: Yes, for AR models, you can opt for installation without a sealing profile but ensure proper sealing tape for driving rain seal.
- Q: What is the maximum possible rear adapter profile length for ERO models?
- A: The rear adapter profile length for ERO models can range from 20 to 80 mm.
Specifications
Order form for guide rails for built-in roller shutters (ERO)and outdoor blinds / exterior Venetian blinds (AR)
- Client: BV
- Version: 01/02/2024
Custom models ERO – FS [x] or Pos.
Flush-mounted (without entry guide)|
Surface-mounted (with entry guide)|
with building protective tape|
Guide rail with brush (std. = keder)|
Driving rain sealing 4|
Complete width < 700 mm|
GR insulation at the rear side 20 mm|
FS insulation at the rear side 40 mm|
With a covering profile at the rear side (type 21)|
Custom models AR – FS [x] or Pos.
without sealing profile|
Sealing profile on one side (inside)|
with building protective tape|
without a recess area on top|
With a recess area below (drawing)|
End cap FUP 1 up to 18°| [°]|
without end cap|
Guide rail with aluminum adapter rear 20 – 80 mm possible| [mm]|
DIMENSION
Explanation – Guide rails for ERO (built-in roller shutter) and AR (outdoor blinds/external Venetian blinds)
Guide rail lengthening from a clear height
Specification of the guide rail lengthening in mm If a negative dimension is specified, the guide rail is shortened accordingly. By default, the dimension for the guide rail equals the clear height.
Armored profile for ERO:
- K37, K52, A37,
- AV42, A52, T37,
- S37
Slat type for AR:
- AF 60, AF 80,
- ARO 65, ARB 80
- ARE 63, ARE 92
Guide rail slit over length
The dimensional specification in mm Only with guide without entry guide at the top (e.g. type 32 and type 33)
Sealing tape for driving rain seal
Possible for all guide rails for ERO that be closed at the rear.
Overview
Overview one-piece guide rails for ERO for profiles K37, A37, AV42, T37, S37
Two-piece single guide rails for profiles
K37, A37, AV42, T37, S37
Two-piece single guide rails for profiles K52 and A52
Multi-part combi-guide rails for profiles K37, A37, AV42, T37, S37
Guide rails for exterior Venetian blinds / outdoor blinds
End caps FUP70/FUP80/FUP95
Installation direction FUP
Multi-part comb guide rails for profiles K52, A52
Documents / Resources
|
HELLA Built In Roller Shutters and Outdoor
Blinds
[pdf] Instruction Manual
Built In Roller Shutters and Outdoor Blinds, Roller Shutters and Outdoor
Blinds, Shutters and Outdoor Blinds, Outdoor Blinds, Blinds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>