Hella marine 2JA 958 126-xxx – Easy Fit LED Courtesy Lamp Instruction Manual
- June 5, 2024
- Hella marine
Table of Contents
Hella marine 2JA 958 126-xxx – Easy Fit LED Courtesy Lamp
SPECIFICATION
- Light Source LED
- Lens Material Polycarbonate
- Installation Pre-wired with Tinned Marine Cable
- Operating Voltage MultivoltTM 12 / 24V DC
- Degree of Protection Completely Sealed
Wiring Colour Coding
| Cable Colour | Connect to | Power Consumption |
|---|---|---|
| Black | Negative (-) | |
| White/Colour | Power (+) | 0.5W |
LED modules are polarity conscious. Reverse polarity will not damage this product but will inhibit its function. Hella recommends wire connections be soldered and heat shrink tubing applied to seal the joint. The installation must be protected by a fast blow fuse not exceeding 3 Amp.
Note: Recommended screw size (4G X 3/8 Pan Head)
TIP: Cap Fitment
After mounting lamp align cap with top edge and push firmly to secure
Caution: This lamp has a polycarbonate lens, please ensure compatibility with installation materials
Warrenty
Congratulations! The product you have selected comes from Hella – one of the
world’s leading manufacturers of lighting products. The product comes with a 5
year warranty from end user purchase covering faults in materials, components
or workmanship In the unlikely event that you should experience a confirmed
warranty related problem with your purchase, Hella will, at its discretion,
either repair, replace or refund the purchase price of the product. Warranty
services may be obtained by returning the product within the warranty period
to the Hella Dealer where the product was originally purchased. This warranty
is in addition to and does not preclude any other rights or remedies available
to the consumer under any local legislation related to the provision of goods
or services.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
This warranty does not cover
- Claim/s as a result of normal wear and tear or of any modifications and / or alterations to the product in any shape or form.
- Claim/s as a result of non-compliance of the assembly, service and operating instructions and/or any unfit or improper use.
- Any expenses incurred in the process of making the claim.
Note: For lamps sold in Australia, warranty services are provided by: Hella Australia Pty. Ltd., 4 Hargrave Place, P.O. Box 89, Mentone, Victoria 3194, Australia. Customer Service 1800 061 72 email: custservice@hella.com https://www.hella.com /hella-au/assets/media_global/IAM_Statement_of_Warranty.pdf
For general comments about Hella marine products please email techfeedback@hellamarine.com or visit www.hellamarine.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>