Hulaed Q26S Wireless Sports Earphones User Manual

Hulaed Q26S Wireless Sports Earphones

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• Interference Conditions: Must not cause harmful interference, and must accept any received interference

Product Usage Instructions

Installation

1. Place the device on a stable surface.
2. Connect the necessary cables to the device.
3. Power on the device by pressing the power button.

Operation

1. Follow the user manual for specific instructions on operating the device.
2. Ensure proper ventilation around the device to prevent overheating.
3. Avoid exposing the device to water or extreme temperatures.

Maintenance

1. Regularly clean the device using a soft, dry cloth.
2. Avoid using harsh chemicals or solvents for cleaning.
3. Check for software updates periodically to ensure optimal performance.

FAQ

Q: What should I do if the device is not powering on?

A: Check if the power source is working properly and try a different power outlet. If the issue persists, contact customer support for assistance.

Q: Can I make modifications to the device?

A: No, any changes or modifications not approved by the responsible party could void your authority to operate the equipment.

Packing List

Product Overview

Charge

For first-time use, please charge it fully

Charging Status of Earphones

• When being charged, the earphones’s LED indicator will illuminate white; When fully charged, the earphones’ white indicator will on for 3 seconds and then go off.

Battery Indicator of Charging Case

• When charging, the pilot lamp will show the real-time power of the charging case Increasing by 25% from left to right;
• When fully charged, the pilot lamp will be on 100% all the time until the power supply is cut off.

Power on

Auto Power On:

• Take out the earphone from the charging case, it will turn on automatically.

Manual Power On:

• Press & hold MFB for about 3 seconds, then the earphone’s indicator flashes white alternately, which means it turns on and is ready to pair.

Power off

Auto Power Off:

• Put the earphones back into the charging case, it will turn off automatically.

Manual Power Off:

• In non-music mode, press & hold MFB for about 10 secs, it will turn off with a prompt sound “power off”.

How to pair

Step 1

• Take out the earphones from the charging case, they will power on and pair with each other automatically.
• You should hear a prompt sound “power on” then “pairing” when first connection.)
• Step 2
• Activate the Bluetooth setting on your phone, search
• There should be a voice prompt connected” if you wear the earphones.

Music

Incoming Call

Switching to sleep mode

When connected to the phone, tap the left or right earbud button 4 times to switch to sleep mode, then prompt “sleeping mode.” No beeps or breathing lights are allowed.

Specifications

• Model: Q26S
• Bluetooth Version: V5.3
• Support Profiles: HFP/HSP/A2DP/AVRCP
• Charging Time (Eartbud): 1 hour
• Charging Time (Changing case): 1 hour
• Battery Capacity (Earbud): 45mAh
• Battery Capacity (Charging case): 250mAh
• Charging Port: TYPE-C
• Charging Voltage: DC 5V
• Operating Frequency: 2.402G – 2.480G
• Operating Range: 10m
• Dimension of Speaker: 6mm

Voice Assistant

Voice Assistant Language

When the phone is not connected

Warnings

• To ensure trouble-free operation, please read the user manual carefully.
• Fully charge both earphones and charging case when first-time use.
• Do not throw/drop/disassemble/make any modifications to the structure or any part of it.
• Please charge with a rated voltage charger.
• Do not replace the built-in batteries of earphones and charging case.
• Do not expose the product to fire, high temperature, direct sunlight, etc.

FAQ

Q Why does the music cut in and out sometimes?

1. Please make sure there is no obstacle between the earphones and your device.
2. Please make sure there is no Microwave oven/WIFi transmitter around you, which is more likely to produce electromagnetic interference and result in a signal interruption.
   • Note: Please keep the device and the earphones as close as possible to ensure a more stable Bluetooth connection.

Q What should I do if the earphones stop charging?

1. We advise you to charge the earphones by using the supplied original charging cable.
2. Please make sure the charging pins and charging points are clean & dry before charging.
3. Please make sure the earphone battery is run out if sometimes it can’t be charged properly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>