VigilLink AMS-4424P LUXUL PoEplus GbE Managed Switch User Manual
- June 10, 2024
- VigilLink
Table of Contents
LUXUL switch configuration
Model number：LUXUL AMS-4424P
Configuration method：Web（http://192.168.0.4 Account: admin Password: admin）
-
1. Set the IP of the wired network card of the computer: 192.168.0.20, subnet mask: 255.255.255.0, and Connect all the wired network ports to any port of the switch with a network cable.
-
Open the switch setting page on the browser, http://192.168.0.4 Account: admin. Password: admin.。
-
Restore the switch to factory settings, click the menu Administration->Factory Defaults, click Yes, and wait for a few seconds for the operation to complete.
-
Click the menu Configuration->IPMC->IGMP Snooping->Basic Configuration to enter the IGMP Snooping configuration page.
-
Select
1. Snooping Enabled
2. Leave Proxy Enabled
3. All Ports Fast Leave
-
Scroll to the bottom and click Save.。
-
Click Administration->Configuration->Save startup-config，click Save Configuration
-
Reboot the switch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>